MILLENNIUM™3
Universal Remote Control
User’s Guide
TABLE OF CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Features And Functions. . . . . . . . . . . . . . . . . . . . . . 4
Key Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installing Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . 7
Programming TV Control. . . . . . . . . . . . . . . . . . . . . 8
Setup Codes for TVs . . . . . . . . . . . . . . . . . . . . . . . . 8
Programming VCR Control . . . . . . . . . . . . . . . . . . 12
Setup Codes for VCRs. . . . . . . . . . . . . . . . . . . . . . 12
Programming TV/VCR Combo Control . . . . . . . . 16
Setup Codes for TV/VCRs . . . . . . . . . . . . . . . . . . . 17
Programming Cable Converter
(or DBS Receiver) Control . . . . . . . . . . . . . . . . . . . 18
To Unlock the Cable Key . . . . . . . . . . . . . . . . . . . . 18
To Program the Cable Key. . . . . . . . . . . . . . . . . . . 18
To Lock the Cable Key. . . . . . . . . . . . . . . . . . . . . . 19
Setup Codes for Cable Converters . . . . . . . . . . . . . 19
Setup Codes for DBS Receivers. . . . . . . . . . . . . . . 20
Using The Shift Key. . . . . . . . . . . . . . . . . . . . . . . . . 21
To Activate TV’s Channel Control Capabilities. . . . 21
To Reset Channel Control To Cable Converter . . . . 21
To Activate Cable’s Video On Demand. . . . . . . . . . 21
To Reset VCR Transport Keys For VCR Use. . . . . . . 21
Searching For Your Code. . . . . . . . . . . . . . . . . . . . 22
Checking The Codes . . . . . . . . . . . . . . . . . . . . . . . 23
Programming The Option Key . . . . . . . . . . . . . . . 24
To Program Option To Remember Channels. . . . . . 24
To Program Option For All On/Off. . . . . . . . . . . . . . 24
To Clear The Option Key . . . . . . . . . . . . . . . . . . . . 25
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Additional Information. . . . . . . . . . . . . . . . . . . . . . 27
2
INTRODUCTION
The Universal Electronics Millennium™ 3 is our latest
generation universal remote control.It is designed to
operate all ofthe features of your cable converter and
only the most-used features of your TV (e.g.,Volume
Up/Down) and VCR (e.g.,Play,Stop,Fast Forward,
Rewind,Pause,and TV/VCR Select).Moreover,the
Millennium 3 is packed with easy-to-use features such as:
• Preprogrammed codes to operate the cable converter
supplied by your cable system provider
• Preprogrammed technology for easy setup
• Color-co ded keys to quickly locate popular func tions
• Cable ID Lock to lock your remote control for use only
with the cable converter
• Code Search to help program control ofolder or
disconti nu ed components
• Option key for assigning your favorite channels
• Shift key for access to cable Video On Demand (VOD)
features and TV channel changing capability
Before you can use your new remote control,you will
need to program it to operate the specific home entertainment components you wish to control.Follow the
instructions detailed in this manual to set up your
Millennium 3 and enjoy your new remote control.
3
FEATURES AND FUNCTIONS
Use the illustration below to locate Millennium 3 features
and then study the Key Charts (on the next two pages) to
learn how they function.
4
Key Charts
The LED (red light) blinks to show that
the remote control is working and is
sending signals.
Press VCR,TV,or CBL once to turn on
or off a se lected component.
Use SETUP for all programming
sequences.
Use the keypad (0 ~ 9) to direct ly select
channels (e.g.,09 or 31).
Press MUTE once to turn sound off
or on.
Press ENTER once after enteri ng channel
numbers on some TV models.
Use volume + (or volume -) to raise (or
lower) the sound volume.
Use CH + (or CH -) to select the next higher
(or lower) channel.
Press LASTonce to recall the last channel
and to page back one screen in the
main menu.
Use FAV to cycle through your favorite
channels that are stored in your cable
converter.
Use GUIDE to display the program guide.
Press PPV/LOCK once to display the pay
per view menu or to lock out a specific
channel on your cable converter.
Use EXIT to exit out of your cable
converter’s menu and guide.
Use cursor keys to move the cursor in
the program guide and menu screens.
continued on next page...
5
Key Charts (continued)
Use SELECT/OK to choose options,PPV
events,and to tune programs from the
program guide.
Use INFO to display current channel and
program information.
Press MENU once to display your cable
conver ter’s screen menu.
Use PAGE ▲▲(or PAGE ▼▼) to page up
or down) through menu screens and the
program guide.
Use OPTION to program one-button
selection of your favorite channels (see
page 24).
Use SHIFT to access features on your
TV’s channels and cable system’s Video
On Demand (VOD) (see page 21).
In the VCR and TV modes,use the REW,
PLAY,FF,REC,STOP,and PAUSE keys to
control your VCR.To record a program,
press REC twice.
Reserved for cable converter features
(see your cable converter manual).
Press TV/VCRonce to switch the VCR to
view TV channels or tape.
6
INSTALLING BATTERIES
❶
❸
❷
1. On the back ofthe Millennium 3,push the tab
and lift off the battery cover.
2. Obtain two (2) fully-charged AA alkaline bat-
teries.Match the + and – marks on the batteries to the + and – marks in the battery case,
then insert the new batteries.
3. Press the battery cover back into place.The tab
should click when the cover is locked.
4. Test the unit by any mode key (e.g.VCR,TV,or
CBL).If the batteries are inserted correctly,the
LED will blink once.
NOTE:Whenever batteries need replacement,the Millennium 3
will blink twice with every key press.Simply replace the batteries
and the Millennium 3 will be restored to its full functionality,
complete with your favorite sett ing s.
7
PROGRAMMING TV CONTROL
NOTE:If you own a TV/VCR combination,skip this section and
perform “Programming TV/VCR Combo Cont rol”on page 16.
Locate the brand name of your TV in the Setup Codes For
TVssection below,and write it in the following space.
TV Brand: __________________________________
The brands are listed in alphabetical order with the most
popular codes listed first.You will use one of these codes
to program the Millennium 3 to operate your TV:
1. Turn on the TV.
2. On the Millennium 3,press TV once.Press and
hold SETUP until the LED blinks twice,then
release SETUP.
3. Enter the first four-digit code for your TV. If
you perform this procedure correctly,the LED
will blink twice.
NOTE:If the LED did not blink twice after entering
the code’s last digit,then repeat steps 2 through 3 and
try entering the same code again.
4. Aim the Millennium 3 at your TV and press TV
once.The TV should turn off.If it does not
respond,repeat steps 2-3,trying each code for
your brand unt il you find one that works.If it
still does not work,try searching for the code
(see Searching For Your Code on page 22).
5. Write your TV code in the boxes below for
fut ure reference .
NOTE:Remember, to use the Millennium 3 to operate your TV,
press
TV
first.
Setup Codes for TVs:
A-Mark 0003
AOC 0030,0019,0003,0052,0185
Abex 0032
Admiral 0093
Adventura 0046
Aiko 0092
Akai 0030
Alaron 0179
Ambassador 0177
8
Anam 0180
Anam National 0055
Archer 0003
Audiovox 0451,0180,0003,0092,0623
Baysonic 0180
Belcor 0019
Bell & Howell 0154,0016
Bradford 0180
Brockwood 0019
Broksonic 0236,0463,0003
CXC 0180
Candle 0030,0056,0046,0186
Carnivale 0030
Carver 0054
Celebrity 0000
Cineral 0451,0092
Citizen 0060,0030,0056,0039,0046, 0092,0186,0280
Clairtone 0185
Concerto 0056
Contec 0180,0185
Craig 0180
Crosley 0054
Crown 0180,0039
Curtis Mathes 0047,0054,0154,0051,0451,0093,0060,0030, 0145,0056,
Daewoo 0451,0019,0039,0092,0623,0624
Daytron 0019
Denon 0145
Dumont 0017,0019
Dwin 0720,0774
Electroband 0000,0185
Emerson 0154,0236,0463,0180,0282, 0178,0019,0179,0039, 0038,
Envision 0030
Fisher 0154,0159
Fujitsu 0179
Funai 0180,0179,0171
Futuretech 0180
GE 0047,0051,0451,0093,0282,0178,0021,0055, 0027,0135
Gibralter 0017,0030,0019
GoldStar 0030,0178,0019,0056,0001, 0032
Gradiente 0053,0056
Grunpy 0180,0179
Hallmark 0178
Harley Davidson 0179
Harman/Kardon 0054
Harvard 0180
Hitachi 0145,0056, 0032,0038,0151
Infinity 0054
Inteq 0017
JBL 0054
JCB 0000
0016,0039,0166,0466
0177,0185,0280,0623,0624
continued on next page...
9
Setup Codes for TVs (continued):
JVC 0053
Janeil 0046
KEC 0180
KTV 0180,0030,0039,0185,0280
Kaypani 0052
Kenwood 0030,0019
Kloss 0024,0046
LG 0056
LXI 0047,0054, 0154,0156,0178
Logik 0016
Luxman 0056
MEI 0185
MGA 0150,0030,0178, 0019
MTC 0060,0030,0019,0056,0185
Magnavox 0054,0030,0179,0020,0024,0096,0186,0187,0386
Majestic 0016
Marantz 0054,0030
Matsushita 0250
Megatron 0178,0145,0003
Memorex 0154,0250,0150,0178,0056,0016
Midland 0047,0017,0051,0039, 0032,0135
Minutz 0021
Mitsubishi 0093,0150,0178,0019
Motorola 0093,0055
Multitech 0180
NAD 0156,0178,0166
NEC 0030,0019,0056,0497
NTC 0092
Nikko 0030,0178,0092
Noshi 0018
Onwa 0180
Optimus 0154, 0250,0166
Optonica 0093,0165
Orion 0236,0463,0179
Panasonic 0051,0250,0055
Penney 0047,0156,0051,0060,0030,0178,0021,0019,0018,0056,
Philco 0054,0463,0030,0145,0019,0020,0096
Philips 0054
Pilot 0030,0019,0039
Pioneer 0038,0166
Portland 0019,0039,0092
Prism 0051
Proscan 0047
Proton 0178,0003,0052,0466
Pulsar 0017,0019
Quasar 0051,0250,0165, 0055
RCA 0047,0051,0093,0019,0018,0038,0090,0135
Radio Shack 0047,0154,0165,0180,0030,0178,0019,0056, 0039,0032
Realistic 0154,0165,0180,0030,0178,0019,0056,0039,0032
0039,0003,0027,0032,0135
10
Rhapsody 0185
Runco 0017,0030,0497
SSS 0180,0019
Sampo 0030,0039,0032,0052
Samsung 0060,0030,0178,0019, 0056,0032
Samsux 0039
Sansei 0451
Sansui 0463
Sanyo 0154,0146,0159
Scimitsu 0019
Scotch 0178
Scott 0236,0180,0178,0019,0179
Sears 0047,0054,0154,0156,0178,0179,0056,0146,0159,0171
Semivox 0180
Semp 0156
Sharp 0093,0165,0039,0386
Shogun 0019
Signature 0016
Simpson 0186,0187
Sony 0000,0080
Soundesign 0180,0178,0179,0186
Spectricon 0003
Squareview 0171
Starlite 0180
Supre-M acy 0046
Supreme 0000
Sylvania 0054,0030,0020,0096
Symphonic 0171
TMK 0178,0056,0177
Tandy 0093
Tatung 0055,0003
Technics 0051,0250
Technol Ace 0179
Techwood 0051,0056,0003
Teknika 0054,0180,0150,0060,0019, 0179,0056,0016,0039,
Telefunken 0056
Toshiba 0154,0156,0060
Tosonic 0185
Totevision 0039
Univ ersal 0027
Vector Research 0030
Victor 0053
Vidikron 0054
Vidtech 0178,0019
Viking 0046
Wards 0054,0165,0030,0178,0021, 0019,0179,0056,0016,0020,
White Westinghouse
Yamaha 0030,0019
Zenith 0017,0016,0092
Zonda 0003
0092,0186
0027,0080,0096
0623,0624
11
PROGRAMMING VCR CONTROL
NOTE:If you own a TV/VCR combination,skip this section and
perform “Programming TV/VCR Combo Cont rol”on page 16.
Locate the brand name of your VCR in the Setup Codes For
VCRssection below,and write it in the following space.
VCR Br and: __________________________________
The brands are listed in alphabetical order with the most
popular codes listed first.You will use one of these codes
to program the Millennium 3 to operate your VCR:
1. Turn on your VCR and insert a video cassette.
2. On the Millennium 3,press VCR once.Press
and hold SETUP until the LED blinks twice,
then release SETUP.
3. Enter the first four-digit code for your VCR.If
you perform this procedure correctly,the LED
will blink twice.
NOTE:If the LED did not blink twice after entering
the code’s last digit,then repeat steps 2 through 3 and
try entering the same code again.
4. Aim the Millennium 3 at your VCR and press
VCR once.The VCR should turn off.If your VCR
remote control does not have a POWER
key,press PLAY.If the VCR does not respond,
repeat steps 2-3,trying each code listed for your
brand until you find one that works.If the VCR
still does not work ,try searching for the code
(see Searching For Your Code on page 22).
5. Write your VCR code in the boxes below for
fut ure reference .
NOTE:Remember,to use the Millennium 3 to operate your VCR,
press
VCR
first.
Setup Codes for VCRs:
Admiral 0048
Adventura 0000
Aiko 0278
Aiwa 0037,0000,0307
Akai 0041,0061,0106
American High 0035
Asha 0240
12
Audio v ox 0037
Beaumark 0240
Bell & Howel l 0104
Broksonic 0184,0121,0209,0002,0479
CCE 0072,0278
Calix 0037
Canon 0035
Capehart 0020
Carver 0081
Cineral 0278
Citizen 0037,0278
Colt 0072
Craig 0037,0047,0240,0072,0271
Curtis Mathes 0060,0035,0041,0162
Cybernex 0240
Daewoo 0045,0278,0020,0561
Daytron 0020
Denon 0042
Dynatech 0000
Electrohome 0037
Electrophonic 0037
Emerex 0032
Emerson 0037,0184,0000,0121,0043, 0209,0002,0278,0061, 0208,
Fisher 0047,0104,0054,0066
Fuji 0035,0033
Funai 0000
GE 0060,0035,0048,0240,0202
Garrard 0000
Go Video 0526
GoldStar 0037, 0038
Gradiente 0000,0008
HI-Q 0047
Harley Davidson 0000
Harman/Kardon 0081,0038
Harwood 0072
Headquarter 0046
Hitachi 0000,0042, 0041,0105
JVC 0067,0041,0008
Jensen 0041
KEC 0037,0278
KLH 0072
Kenwoo d 0067,0041,0038
Kodak 0035,0037
LXI 0037
Lloyd’s 0000,0208
Logik 0072
MEI 0035
MGA 0240,0043,0061
MGN Technology 0240
MTC 0240,0000
Magnasonic 0278
0212,0479,0561
continued on next page...
13
Setup Codes for VCRs (continued):
Magnavox 0035,0039, 0081,0000,0149
Magnin 0240
Marantz 0035,0081
Marta 0037
Matsushita 0035, 0162
Memorex 0035,0037,0048, 0039,0047,0240,0000, 0104,0162,0046,
Minolta 0042,0105
Mitsubishi 0048,0067,0043,0061
Motorola 0035,0048
Multitech 0000,0072
NEC 0104,0067,0041,0038
Nikko 0037
Nikon 0034
Noblex 0240
Olympus 0035
Optimus 0037, 0048,0104,0162
Optonica 0062
Orion 0184,0002,0479
Panasonic 0035,0162,0077,0225
Penney 0035,0037,0240,0042,0038,0054
Pentax 0042,0105
Philco 0035,0209,0479
Philips 0035,0081,0062
Pilot 0037
Pioneer 0067
Portland 0020
Profitronic 0240
Proscan 0060,0202
Protec 0072
Pulsar 0039
Quarter 0046
Quartz 0046
Quasar 0035,0162,0077
RCA 0060,0035,0048,0240,0042,0149,0077,0105,0106,0202
Radio Shack 0000
Radix 0037
Randex 0037
Realistic 0035,0037,0048,0047,0000,0104,0062,0046,0066
Ricoh 0034
Runco 0039
STS 0042
Samsung 0240,0045
Sanky 0048,0039
Sansui 0000,0067,0041,0271,0479
Sanyo 0047,0240,0104,0046
Scott 0184,0045,0121,0043,0212
Sears 0035,0037,0047,0000,0042,0104,0046,0054,0066,0105
Semp 0045
Sharp 0048,0062
0307
14
Shintom 0072
Shogun 0240
Singer 0072
Sony 0035,0032,0000,0033,0034
Sylvania 0035,0081,0000,0043
Symphonic 0000
TMK 0240,0208
Tatung 0041
Teac 0000,0041
Technics 0035,0162
Teknika 0035,0037,0000
Thomas 0000
Toshiba 0045,0043,0066,0212
Totevision 0037,0240
Unitech 0240
Vector 0045
Vector Research 0038
Video Concepts 0045,0061
Videosonic 0240
Wards 0060,0035,0048,0047,0081, 0240,0000,0042,0072,0149,
White Westinghouse
XR-1000 0035,0000, 0072
Yamaha 0038
Zenith 0039,0000,0033,0034
0062,0212
0278
15
PROGRAMMING TV/VCR COMBO CONTROL
Locate the brand name ofyour TV/VCR Combo in the
Setup Codes For TV/VCR Combos section below,and write
it in the following space.
TV/VCR Combo Brand: ________________________
The brands are listed in alphabetical order with popular
codes listed first.You will use one of these codes to program the Millennium 3 to operate your TV/VCR Combo:
1. Turn on your TV/VCR Combo and inser t a
video cassette.
2. On the Millennium 3,press VCR once.Press
and hold SETUP until the LED blinks twice,
then release SETUP.
3. Enter the first four-digit code for your TV/VCR
Combo.Ifyou perform this procedure correctly,the LED will blink twice.
NOTE:If the LED did not blink twice after entering
the code’s last digit,then repeat steps 2 through 3 and
try entering the same code again.
4. Aim the Millennium 3 at your TV/VCR Combo
and press VCR once.The unit should turn off.If
it does not resp ond,repeat steps 2-3,trying
each code listed for your brand until you find
one that works.If it still does not work,try
searching for the code (see S earching For Your
Codeon page 22).
5. Ifyou’ve located a TV/VCR setup code that
works your TV/VCR Combo and a separate
TV code is also listed,you’ll need to program
this code into the Millennium 3 to access volume control (see P rog ramming TV Cont rol on
page 8).
Ifthere is no separate TV code listed,you will
need to perform the follow ing steps to access
volume control:
a. Press and hold SETUP until the LED blinks
twice,then release SETUP.
b. Enter 9 - 9 - 3.The LED will blink twice.
c. Press VCRonce.The LED will blink twice.
16
6. Write your TV/VCR Combo code in the boxes
below for future reference.
NOTE:Remember,to use the Millennium 3 to operate your
TV/VCR Combo,press
VCR
first.
Setup Codes for TV/VCR Combos:
American High 0035 (for TV use 0051)
Brocksonic 0002, 0294,
Colt 0072
Curtis Mathis 0035 (for TV use 0051)
Daewoo 0278
Emerson 0002,0294,0479
Funai 0000
GE 0035 (for TV use 0051),0060 (for TV use 0047),
Hitachi 0035 (for TV use 0051),0000
HQ 0000
Lloyds 0000
MGA 0240
Magnavox 0081 (for TV use 0054),0035 (for TV use 0051),0000
Magnin 0240
Memorex 0037,0162 (for TV use 0250)
Mitsubishi 0048 (for TV use 0093)
Orion 0002,0294,0479
Panasonic 0035 (for TV use 0051),0162 (for TV use 0250)
Penney 0035 (for TV use 0051),0240,0162 (for TV use 0250)
Quasar 0035 (for TV use 0051),0162 (for TV use 0250)
RCA 0060 (for TV use 0047),0035 (for TV use 0051),
Sansui 0000,0479
Sanyo 0240
Sears 0000,0037
Sharp 0048 (for TV use 0093)
Sony 0032 (for TV use 0000)
Symphonic 0000
Zenith 0000
0048 (for TV use 0093),0240
0048 (for TV use 0093)
17
PROGRAMMING CABLE CONVERTER
(OR DBS RECEIVER) CONTROL
The Millennium 3 is preprogrammed at the factory to
operate the cable converter given to you by your cable
company. However,if you have another brand or model
ofcable converter or satellite receiver that you would like
to cont rol,then you’ll need to perform the following
instructions to unlock the cable key,enter in a new code,
and lock the cable key again.
To unlock the Cable key:
1. Turn on the Cable Converter or DBS Receiver.
2. On the Millennium 3,press CBL once.Press
and hold SETUP until the LED blinks twice,
then release SETUP.
3. Enter 9- 9 - 7.The LED will blink twice.
4. Press CH –once.The LED will blink twice.
To program the Cable key:
1. Locate the brand name ofyour Cable Converter
(or Direct Broadcast Satellite Receiver) in the
Setup Codes For Cable Converters(or Setup
Codes For DBS Receivers) section starting on the
next page,and write it in the appropriate space.
Cable Converter Br and: ________________
or
DBS Receiver Brand: __________________
The brands are listed in alphabetical order
with the most popular codes listed first.You
will use one ofthese codes to reprogram the
Millennium 3 to operate your Cable Converter
or DBS Receiver.
2. On the Millennium 3,press CBL once.Press
and hold SETUP until the LED blinks twice,
then release SETUP.
3. Enter the first four-digit code for your Cable
Converter or DBS Re ceiver.Ifyou perform this
procedure correctly,the LED will blink twice.
NOTE:If the LED did not blink twice after entering
the code’s last digit,then repeat steps 2 through 3 and
try entering the same code again.
18
4. Aim the Millennium 3 at your Cable Converter
or DBS Receiver and press CBL once.The unit
should turn off.Ifit does not respond,repeat
steps 2-3,trying each code listed for your brand
until you find one that works.If itstill does not
work ,try searching for the code (see Searching
For Your Code on page 22).
5. Write your Cable Converter or DBS Receiver
code in the boxes below for future reference.
NOTE:Remember,to use the Millennium 3 to operate your Cable
Converter or DBS Receiver,press
CABLE
first.
To lock the Cable key:
1. On the Millennium 3,press CBL once.Press
and hold SETUP until the LED blinks twice,
then release SETUP.
2. Enter 9- 9 - 7.The LED will blink twice.
3. Press CH +once.The LED will blink twice.
Setup Codes for Cable Converters:
ABC 0003,0008, 0017,0013
ABC Cable 0033
Americast 0899
Contec 0019
General Instrument
GoldStar 0144
Hamlin 0020,0259
Jerrold 0003,0012,0476,0276,0810
Macom 0033
Memorex 0000
Movie Time 0063
NSC 0063
Oak 0019
Optimus 0021
Panasonic 0000,0107,0021
Paragon 0000
Pioneer 0144,0533
Pulsar 0000
Quasar 0000
RCA 0021
Regal 0020,0259
Runco 0000
0476,0276,0810
19
continued on next page...
Setup Codes for Cable Converters (continued):
Samsung 0144
Scientific Atlan ta 0008,0477,0017,0277,0774,0877
Sprucer 0021
Starcom 0003
TV86 0063
Tocom 0012,0013
Toshiba 0000
Viewstar 0063
Zenith 0000,0525,0899
Setup Codes for DBS Receivers:
AlphaStar 0772
Echostar 0775
Expressvu 0775
General Instrument
HTS 0775
Hitachi 0819
Hughes 0749
JVC 0775
Jerrold 0627,0361
Magnavox 0724,0722
Memorex 0724
Next Level 0869
Panasonic 0701
Philips 0724,0722
Primestar 0627,0361
RCA 0566
Sony 0639
Star Choice 0869
Toshiba 0790
Uniden 0724,0722
Zenith 0856
0627,0361,0869
20
USING THE SHIFT KEY
The SHIFT key is designe d to provide access to chan n e l
control capabilities of your TV (e.g.,Digits 0-9,Up/Down,
Enter,and Last) and Video On Demand (VOD) features of
your cable converter.
NOTE:Video On Demand is not available on all cable converters.
To check for compatibility,please refer to the owner’s manual that
came with your cable converter.When activated the VCR transport keys will serve as Video On Demand keys.
To Activate TV’s Channel Control Capabilities:
1. On the Millennium 3,press SHIFT once.
2. Press TV once.The LED will blink twice.
To Reset Channel Control To Cable Converter:
1. On the Millennium 3,press SHIFT once.
2. Press any key once,excluding TV.
To Activate Cable’s Video On Demand (Using
The VCR Transport Keys):
1. On the Millennium 3,press SHIFT once.
2. Press PLAY once.The LED wil l blink tw ice.
To Reset VCR Transport Keys for VCR Use:
1. On the Millennium 3,press SHIFT once.
2. Press and release CBL.
21
SEARCHING FOR YOUR CODE
Ifyour TV,VCR,or Cable Converter does not respond to
the Millennium 3 after trying all of the codes listed for
your brand,or ifyour brand is not listed at all,try searching for your code.
For example,to search for a co de for your TV:
1. Turn on your TV.
2. On the Millennium 3,press and hold SETUP
until the LED blinks twice,then release SETUP.
3. Enter 9- 9 - 1.The LED will blink twice.
4. Aim the remote control at the the TV and slowly
alternate between pressing ▲▲ and TV.
Stop when the TV turns off.
NOTE:In the search mode,the Millennium 3 will
send IR codes from its library to the selected component,starting with the most popular code first.
5. Press SETUP once to lock in the code.
6. To search for the codes of other components,
repeat steps 1 through 5,but substitute the
appropriate key (i.e.,VCR or CBL) for the (VCR
or Cable) component you are searching for.
22
CHECKING THE CODES
Ifyou have set up the Millennium 3 using the Searching
For Your Co de procedure,you may need to find out which
four-digit code is operating your equipment:
For example,to find out which code is operating your TV:
1. Turn on your TV.
2. On the Millennium 3,press and hold SETUP
until the LED blinks twice,then release SETUP.
3. Enter 9- 9 - 0.The LED will blink twice.
4. To view the code for the first digit,press 1once.
Wait 3 seconds and count the number of LED
blinks (e.g.,3 blinks = 3) and w rite down the
number in the leftmost TV Co de box below.
NOTE:If a code digit is “0”,the LED will not blink.
5. Repeat step 4 three more times for remaining
digits.Use 2 for the second digit, 3 for the third
digit,and 4 for the fourth digit.Finish writing
down the code in the TV Code boxes below.
6. To check for the codes of other components,
repeat steps 1 through 5,but substitute the
appropriate key (i.e.,VCR or CBL) for the (VCR
or Cable) component you are checking.Write
down the codes in the appropriate boxes below.
TV Code
VCR Code
CABLE Code
23
PROGRAMMING THE OPTION KEY FOR A
SPECIFIC CHANNEL OR KEY SEQUENCE
The Millennium 3 includes one OPTION key that can be
programmed to remember up to three of your favorite
channel settings.Or you can set it to remember a
sequence ofkey presses,such as “All On /All Off”, so you
can turn on/offyour components w ith a single key press.
To program OPTION to remember channels:
1. On the Millennium 3,press and hold SETUP
until the LED blinks twice,then release SETUP.
2. Enter 9- 9 - 5.The LED will blink twice.
3. Press OPTION once.
4. Using the keypad,enter the channel number to
be remembered (e.g.,3 - 9for channel 39).
NOTE:If you are programming a channel for a
Digital Cable Converter,you need to enter all channels in a 3-digit channel format. For example,if the
desired channel is 39,then enter it as
5. Press and hold SETUP until the LED blinks
twice,then release SETUP.
0- 3- 9
.
6. To add another channel,repeat steps 1-5,substituting the new chan nel to be added in step 3.
NOTE:Programming more than three channels onto
OPTION
key will overwrite previous settings.To clear all
channels in memory,perform “To Clear The Option
Key”on the next page.
To program OPTION for all On/Off:
1. On the Millennium 3,press and hold SETUP
until the LED blinks twice,then release SETUP.
2. Enter 9- 9 - 5.The LED will blink twice.
3. Press OPTION once.
4. Press CBL.
5. Press TV.
6. Press VCR.
7. Press and hold SETUP until the LED blinks
twice,then release SETUP.
24
To clear the OPTION key:
1. On the Millennium 3,press and hold SETUP
until the LED blinks twice,then release SETUP.
2. Enter 9- 9 - 5.The LED will blink twice.
3. Press OPTION once.
4. Press and hold SETUP until the LED blinks
twice,then release SETUP.
5. The OPTION key is now clear and ready for
reprogramming.
25
TROUBLESHOOTING
PROBLEM: LED does not blink or blinks twice when you
SOLUTION: Replace the batteries with two (2) new AA
PROBLEM: LED blinks when you press a key,but home
SOLUTION: Make sure you are aiming the Millennium 3 at
PROBLEM: The Millennium 3 does not control home enter-
SOLUTION: Try all listed codes for the component brand
PROBLEM: TV/VCR combo does not respond properly.
SOLUTION: Use the VCR codes for your brand. Some combo
PROBLEM: CH+ , CH– ,and LAST do not work for your
SOLUTION: Due to RCA design (1983-1987),only the original
PROBLEM: Changi ng channels does not work properly.
SOLUTION: Iforiginal remote control required pressing
PROBLEM: Tried “Search Method”and still could not find a
SOLUTION: Try the “Search Method”again after clearing out
PROBLEM: Remote control does not turn on Sony or Shar p
SOLUTION: For power on,these products require program-
press a key.
alkaline batteries (see page 7).
entertainment component does not respond.
your home entertainment component and that
you are within 15feet of the component you are
trying to control.
tainment components or commands are not performing properly.
being set up. Make sure all components can be
operated with an infrared remote control.
units may require both a TV code and a VCR
code for full operation (see page 16).
RCA TV.
remote control wil l operate these funct ions.
ENTER to change channels,press ENTER on the
Millennium 3 after entering a channel number.
working cod e.
the device key as follows: Press and hold ENTER
until red light blinks twice,then release.Next
enter 9- 9 - 2.Then press and release the device
key to be cleared twice.
TV/VCR Combo.
ming TV codes on the Millennium 3.For Sony,
use TV code 0000 and VCR code 0032.For Sharp,
use TV code 0093 and VCR code 0048.
26
ADDITIONAL INFORMATION
The Millennium 3 does not have any user-serviceable
parts.Opening the case,except for the battery cover, may
cause permanent damage to your Millennium 3.
For help via the Internet,visit us at:
cable.rcinfo.com
(do not type in http://or www before the address)
For help via e-mail,contact us at:
CableHelp@ueic.com
Copyright 1999 by Universal Electronics Inc.No part of
this publication may be reproduced,transmitted,transcribed,stored in any retrieval system,or translated to
any language,in any form or by any means,electronic,
mechanical,magnetic,optical,manual,or otherwise,
without the prior written permission of Universal Electronics Inc.
M3090 5/99
27
Loading...