Universal Electronics CONTROL 2, M4080A User Manual

The

Control 2

Remote Control

UNIVERSAL REMOTES

Features of the

Control 2's

Keypad

Installing the Batteries

Your

Control 2

requires four new AAA alkaline

batteries. To install the batteries:

1. On the back of the

Control 2

, pull back on the tab and lift off the battery cover.

2. Match the + and - marks on the batteries to the + and - marks inside the battery compartment and insert the batteries.

3. Press the battery cover back into place.

4. Test the remote control by pressing the TV key. If the batteries are installed

correctly, the red light will blink once.

NOTE: Removing the batteries WILL NO T require y ou to reprogram your remote. The red light will blink 5 times with each key press when the batteries need replacing.

How to Setup the

Control 2

Operate your Television

1. Turn on your Tele vision.

2. Press and release TV.

3. Press and hold SETUP until the

Control 2’s

red light blinks twice.

Release SETUP.

4. Enter the first three-digit Television

code listed in the “SET UP CODES FOR TVs” section. If you perform this procedure correctly, the red light will blink twice.

5. Aim the

Control 2

at your television and press TV. Your television should turn off. If your television does not turn off, repeat steps 1-4 trying each code for your brand until you find the code that operates your television. If you still cannot get your television to work with the

Control 2

, try searching for your code as outlined in the “Searching For Your Television Code” section.

NOTE: Since the Control 2 is only designed to operate Televisions and Cable Converters, the Control 2 will not operate TV/VCR Combinations.

Setup Codes for TVs

A-Mark 003 Abex 032 Admiral 093, 165, 016, 047, 180 Adventura 046 Aiko 092 Akai 030 Alleron 179 Ambassador 177 Anam 068, 180 Anam National 055 AOC 030, 003, 019, 052, 185 Archer 003 Audiovox 003, 180 Belcor 019 Bell & Howell 016, 154 Bradford 180 Brockwood 019 Broksonic 236, 463, 003 Candle 030, 046, 056, 186 Carnivale 030 Carver 054 CCE 329 Celebrity 000 Citizen 030, 039, 046, 056, 060, 092, 186,

280 Clairtone 185 Concerto 056 Contec 157, 158, 180, 185 Craig 180 Crown 039, 180 Curtis Mathes 154, 030, 039, 060, 047, 415 CXC 180 Daewoo 451, 092, 019, 039 Daytron 019 Dumont 017, 019 Electroband 000, 185 Electrohome 381, 409 Emerson 463, 236, 019, 038, 039, 154, 158,

177, 178, 179, 180, 185, 280, 282 Envision 030 Fisher 154, 159 Fujitsu 179 Funai 171, 179, 180 Futuretech 180 GE 047, 135, 021, 027, 029, 051, 055,

174, 178, 279, 282, 451 Gibralter 017, 019, 030 Goldstar 056, 178, 019, 030, 032, 039, 409 Gradiente 392 Grunpy 179, 180 Hallmark 178 Harman/Kardon 078 Harvard 068, 180 Hitachi 145, 151, 032, 038, 056, 279, 409,

413 Infinity 054 Janeil 046 JBL 054 JCB 000 JVC 053 Kawasho 158 Kaypani 052 KEC 180 Kenwood 019, 030 Kloss 024, 046, 078 KTV 030, 039, 180, 185, 280

Logik 016 Luxman 056 LXI 047, 054, 154, 156, 178 Magnavox 054, 096, 020, 024, 028, 030, 186,

187, 386 Majestic 016 Marantz 054, 030 Matsushita 250, 051 Megatron 003, 145, 178 MEI 185 Memorex 016, 056, 150, 154, 178 MGA 150, 178, 019, 030 Midland 017, 032, 039, 047, 051, 135 Minutz 021 Mitsubishi 150, 178, 019, 093, 241 Motorola 055, 093 MTC 019, 030, 056, 060, 185 Multitech 180 NAD 156, 166, 178 NEC 030, 019, 056 Nikko 030, 092, 178 Noblex 430 Noshi 018 NTC 092 Onwa 180 Optimus 154, 166, 250 Optonica 093, 165 Orion 236, 463, 180 Panasonic 250, 051, 055 Penney 003, 018, 019, 021, 027, 030, 032,

039, 047, 051, 060, 135, 149, 156, 178 Philco 054, 096, 019, 020, 028, 030 Philips 054 Pilot 019, 030, 039 Pioneer 166, 038 Portland 019, 039, 092 Prism 051 Proscan 047 Proton 003, 052, 178 Pulsar 017, 019 Quasar 250, 051, 055, 165 RadioShack 019, 030, 032, 039, 047, 056, 154,

165, 178, 180, 409 RCA 047, 135, 018, 019, 029, 038, 090, 174 Realistic 019, 030, 032, 039, 056, 154, 165,

178, 180 Rhapsody 185 Runco 017, 030 Sampo 030, 032, 039, 052 Samsung 060, 178, 056, 019, 030, 032, 039, 329 Samsux 039 Sanyo 154, 159, 146, 484 Scimitsu 019 Scotch 178 Scott 019, 178, 179, 180, 236 Sears 047, 054, 056, 146, 149, 154, 156,

159, 171, 178, 179 Sharp 093, 165, 039, 157, 386 Shogun 019 Signature 016 Simpson 186, 187 Sony 000, 011, 080, 111 Soundesign 178, 179, 180, 186 Spectricon 003 Squareview 171 SSS 019, 180 Starlite 180 Supre-Macy 046 Supreme 000

Sylvania 054, 020, 028, 030, 096, 381 Symphonic 171 Tandy 093 Tatung 003, 055 Technics 250, 051 Technol Ace 179 Techwood 003, 051, 056 Teknika 016, 019, 039, 054, 056, 060, 092,

150, 179, 180, 186 TMK 056, 177, 178 Toshiba 156, 060, 149, 154 Tosonic 185 Totevision 039 Trical 157 Universal 027 Vector Research 030 Victor 053 Vidikron 054, 242 Vidtech 019, 178 Viking 046 Wards 016, 019, 020, 021, 027, 028, 029,

030, 054, 056, 080, 096, 111, 165,

174, 178, 179 Yamaha 019, 030 Zenith 017, 092, 016 Zonda 003

How to Setup the

Control 2

to Operate

your Cable Converter

1. Turn on your Cable Converter.

3. Press and release CBL.

2. Press and hold SETUP until the

Control 2’s

red light blinks twice.

Release SETUP.

4. Enter the first three-digit Cable Converter code listed in the “SET UP CODES FOR CABLE CONVERTERS” section. If you perform this procedure correctly, the red light will blink twice.

5. Aim

Control 2

at your Cable Converter and press CBL. Your Cable Converter should turn off. If you Cable Converter does not turn off, repeat steps 1-3 trying each code for your brand until you find the code that operates your Cable Converter. If you still cannot get your Cable Converter to work with the C

ontrol 2

, try searching for your code as outlined in the “Searching For Your Cable Code” section.

CBL

VOL

VOL CH

MUTE ENTER

SETUP

LAST

The SETUP key is used to program

Control 2

The TV and CBL keys are used to POWER ON/OFF your TV and Cable Converter respectively.

The VOL ▲/▼ and MUTE keys are used to control the volume of your TV or Cable Converter (See the “Volume Lock” section).

The CH ▲/▼ keys are used to change the channels on your Cable Converter.

The Number Keys (0 - 9) are used for direct channel access on your Cable Converter.

The LAST key returns you to the previously viewed channel on your Cable Converter.

The Cable keys control the functions of your Cable Converter and will vary depending on the manufacturer of your Cable Converter. Please consult your Cable Converter’s Manual for descriptions of key functionality.

SETUP

CBL

VOL

0 - 9

LAST

SETUP

CBL

MUTE

M4080A

ABC 001, 003, 007, 008, 011, 013, 014,

017, 047, 206 Allegro 153, 315 Antronix 022, 207 Archer 022, 039, 153, 207, 797 BBT 267 Belcor 056 Cable Star 056 Cabletenna 022 Cableview 022 Century 153 Citizen 153, 315 Colour Voice 025, 031 Comband 232, 233 Comtec 274 Comtronics 040, 060 Contec 019 Digi 637 Eastern 002, 274 Electricord 078 Emerson 797 Everquest 015, 040 Focus 400 GC Electronics 016, 056, 207 GE 232, 233 GMI 057 Garrard 153 Gemini 015, 057, 070, 242 General Instrument 276, 003, 011, 476 Goldstar 040, 144 Goodmind 797 Hamlin 009, 020, 034, 206, 259, 273 Hitachi 011 Hytex 007 Jasco 153, 315 Jerrold 003, 276, 476, 011, 012, 014, 015,

024, 047, 098, 810 Linsay 440 Macom 033 Magnavox 027, 334 Memorex 000 Movie Time 063, 078, 156, 203 NSC 063, 070, 156, 203 Northcoast 314 Novaplex 618 Oak 007, 019, 248 Optimus 021 Pacific Bell 843 Panasonic 021, 107, 000 Panther 637 Paragon 000 Philips 153, 025, 027, 028, 029, 030, 031,

242, 290, 334, 652 Pioneer 144, 753, 533, 023, 260 Popular Mechanics 400 Prelude 770 Pulsar 000 RCA 021, 487 RK 304, 306 RadioShack 797, 015, 315 Realistic 207 Recoton 400 Regal 020, 259, 273, 279 Regency 002

Setup Codes for Cable Converters

Rembrandt 011, 070 Runco 000 SL Marx 040 Samsung 040, 144 Scientific Atlanta 008, 277, 017, 477, 877, 006, Seam 510 Signal 015, 040 Signature 011 Sprucer 021, 307 Standard Components 096 StarSight 422, 542 Starcom 003, 015, 047, 098 Stargate 015, 040, 770 Starquest 015 Sylvania 001 TFC 310 TV86 063 Tandy 258 Tatung 097 Teknika 146 TeleCaption 221 Teleview 040 Texscan 001, 096 Timeless 274, 418 Tocom 012, 013, 059 Tosh iba 000 Tusa 015 Uniden 225 Unika 022, 153, 207 United Artists 007 United Cable 003 Universal 022, 039, 056, 077, 078, 153, 191,

207, 322 Videoway 250 Vidtech 244 Viewstar 027, 060, 063, 111, 211, 258, 289 Zenith 000, 054, 525 Zentek 400

Searching for Your Television

1. Turn on your television.

2. Press and release TV.

3. Press and hold SETUP until the

Control 2’s

red light blinks twice.

Release SETUP.

4. Press 9 - 9 - 1.

Control 2’s

red light

will blink twice.

5. Now, aim the

Control 2

at your television and slowly alternate between pressing TV and CH▲ until your television turns OFF. You may have to press this sequence of buttons (TV then CH▲) up to 100 times to search the entire library of codes.

6. Once your television turns OFF, immediately press and release SETUP to lock in your code. Your

Control 2

is now ready to operate your

television.

Searching for Your Cable Code

1. Turn on your Cable Converter.

3. Press and release CBL.

2. Press and hold SETUP until the

Control 2’s

red light blinks twice.

Release SETUP.

4. Press 9 - 9 - 1.

Control 2’s

red light

will blink twice.

5. Now, aim the

Control 2

at your Cable Converter and slowly alternate between pressing CBL and CH▲ until your Cable Converter turns OFF. You may have to press this sequence of buttons (CBL then CH▲) up to 100 times to search the entire library of codes.

6. Once your Cable Converter turns OFF, immediately press and release SETUP to lock in your code. Your

Control 2

is now ready to operate your

Cable Converter.

Getting Codes from

Control 2

1. Press and release TV.

2. Press and hold SETUP until

Control

2’s

red light blinks twice, then release

SETUP.

3. Press 9 - 9 - 0.

Control 2’s

red light

will blink twice.

4. For the first digit of your three-digit code, press 1, wait for three seconds and count the number of times

Control

2’s

red light blinks. If the light does

not blink when you press the number

1, the digit is zero.

5. For the second digit, press 2, wait for

three seconds and count the number of times

Control 2’s

red light blinks. If the light does not blink when you press the number 2, the digit is zero.

6. For the third and final digit, press 3, wait for three seconds and count the number of times

Control 2’s

red light blinks. If the light does not blink when you press the number 3, the digit is zero. Now you have your three-digit code.

Volume Lock

If your television is not remote controllable, you can access the volume through your cable converter. To change the volume setting on the

Control 2

to the

Cable mode, use this procedure:

1. Press and hold SETUP until the

Control 2’s

red light blinks twice, then

release SETUP.

2. Press 9 - 9 - 3. The

Control 2’s

red

light will blink twice.

3. Press and release CBL. The

Control

2’s

red light will blink twice.

Now, whenever you press VOL▲ , VOL▼ or MUTE on the

Control 2

, your cable converter will control the

volume. To return the volume setting to the TV mode:

1. Press and hold SETUP until the

Control 2’s

red light blinks twice, then

release SETUP.

2. Press 9 - 9 - 3. The

Control 2’s

red

light will blink twice.

3. Press and release TV. The

Control

2’s

red light will blink twice.

Now, whenever you press VOL▲ , VOL▼ or MUTE on the

Control 2

, your TV will control the volume.

Troubleshooting

Problem Solution

Red light does not blink or blinks 5 times when you press a key?

The

Control 2

does not operate your television?

The red light blinks when you press a key but you receive no response from your television or Cable Converter?

Replace the batteries with four (4) new AAA alkaline batteries.

Try all of the codes listed for your brand of television in the “Set-Up Codes” section. Make sure the television you are setting up can be operated with an infrared remote control.

Make sure you are aiming your

Control 2

at your television or Cable Converter and that you are within 15 feet before using your remote.

World Wide Web: http://www.oneforall.com

URC-22XXX BOO M4080A 8/98

SETUP

9 - 9 - 1

SETUP

9 - 9 - 0

SETUP

CBL

9 - 9 - 1

CBL

SETUP

9 - 9 - 3

CBL

SETUP

9 - 9 - 3

Universal Electronics CONTROL 2, M4080A User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual