Unitek DX02 User Manual
Model: DX02
Foreword
Thank you for purchasing our product. Please read this manual
carefully before use and keep it for future reference.
Assertion
The company reserves the final right to interpret the contents given
in the manual, and the contents are subject to change without
further notice. This manual is prepared only for users' reference.
The Company is committed to continuously improving customer
operation experience, and the real object shall prevail in case the
product disaccords with the manual.
Safety information
To use the product, please read carefully and learn about the
following safety measures.
Never try to open the housing of the products since only
authorized maintainers are allowed to maintain the products.
Body worn camera may show a temperature rise after it works
for a long time, and that is really not a fault.
Use only the attachments provided by the manufacturer.
Slam into the product artificially, submerge the complete
machine, or place the product in a hot environment higher
than 60 degrees for a long time.
The Company will assume no responsibility for any damages
to the product caused by the practices above.
User Manual
TABLE OF CONTENTS
SECTION I DESCRIPTION OF COMPONENTS ............................................. 3
SECTION II BASIC OPERATION .................................... 4
2.1 STARTUP ......................................................................................................... 4
2.2 VIDEO RECORDING ......................................................................................... 4
2.3 PHOTO TAKING ............................................................................................... 5
2.4 AUDIO RECORDING ......................................................................................... 6
2.5 INFRARED NIGHT VIEWING ............................................................................. 6
2.6 PLAYBACK ...................................................................................................... 6
2.7 INTERPHONE SPEECH TRANSMISSION FUNCTION ............................................. 8
2.8 RESETTING ..................................................................................................... 8
2.9 VIDEO RESOLUTION RATIO .............................................................................. 9
2.10 PHOTO-TAKING RESOLUTION RATIO .............................................................. 9
2.11 SEGMENTATION TIME .................................................................................... 9
2.12 MOTION DETECTION FUNCTION ................................................................... 9
2.13 INDICATOR STATE ......................................................................................... 9
2.14 VOICE BROADCAST ...................................................................................... 9
2.15 LANGUAGE ................................................................................................. 10
2.16 GPS………………………………………………………...………………10
2.17 AES ENCRYPTION FUNCTION (OPTIONAL) ................................................. 10
SECTION IIIINSTALLATION AND USE OF MANAGEMENT SOFTWARE
(BASIC EDITION).................. ............................................................................... 11
3.1 OVERVIEW OF SOFTWARE .............................................................................. 11
3.2 OPERATING SYSTEM ..................................................................................... 12
3.3 INSTALLATION OF DRIVER ............................................................................ 12
3.4 OPEN THE MANAGEMENT SOFTWARE ............................................................ 16
3.5 OPERATING INSTRUCTIONS FOR THE MANAGEMENT SOFTWARE .................... 16
SECTION IVCHARGING MANAGEMENT .................................................... 21
SECTION V TROUBLE SHOOTING AND SOLUTIONS ............................... 21
Attachment1 RoHS Ingredient List of China................................22
Section I Description of Components
1) Indicator
2) Photo taking key
3) Local microphone
4) Infrared lamp
5) Talkback key
6) Lens
7) Light detection
8) Speaker
9) Menu key
10) Switch key
11) Talkback interface/data interface/charging interface
12) Audio recording key
13) Talkback microphone
14) AV IN/USB interface
15) IMP key
16) Playback key
17) Video recording key
18) Crocodile clamp interface
19) Screen
20) Reset key
Section II Basic Operation
2.1 Startup
Push the power key to start up the machine, and push and hold the
key for 2s to allow the system to automatically access the preview
mode.
Note: 1.The top of LCD screen shows from left to right the
photo taking format, free space, the number of shot
files, and video recording format in sequence.
2.The bottom of LCD screen shows the battery
capacity, GPS status,current time and WIFI icon
(optional).
2.2 Video recording
The system will automatically access the preview mode after the
machine is started up. The system starts audio video recording once
the video recording key is pushed. The machine can take a candid
photograph and automatically saves it in JPG format if the photo
taking key is pushed in process of video recording. The system
gives a “Ticktack”, stops video recording, and automatically saves
the video taken in H.264 code format if the video recording key is
pushed once again.
Note: 1. The status indicator lamp gets red and blinks in
process of video recording.
2. The top of LCD screen shows in sequence the image
resolution, video recording status indication, free space,
the number of shot files, and video resolution.
3. The bottom of LCD screen on the first line shows the
battery capacity, GPS,current time and WIFI icon
(optional).
4. In the video recording mode, press the IMP key to
mark the important file. In the preview mode, long
press the IMP key to activate/deactivate the WIFI mode
(optional).
2.3 Photo taking
The system automatically accesses the preview mode after startup.
The operator may push the photo taking key to take a photo, a “Zap”
is given, and the photo taken is automatically saved in JPG format.
2.4 Audio recording
In the preview mode, operator pushes the recording key, a
“Ticktack” is given, and audio recording is started; and pushes the
recording key once more, a “Ticktack” is given, audio recording is
stopped, and the file is automatically saved in WAV format.
Note: In audio recording mode, the status indicator lamp
gets yellow and blinks, and a red dot in the top left corner of
LCD screen blinks.
2.5 Infrared night viewing
The machine can automatically turn on infrared mode as per the
ambient brightness;
Note: 1. Once the infrared lamp is turned on, the image tone
may automatically get black and white.
2.6 Playback
2.6.1 Selecting a file type to be played back
In the preview mode, press the playback key to enter the playback
mode (Figure 1). Press the audio recording key or the photo taking
key to scroll the type of file to be played to the left or right, then
press the playback key again to enter the thumbnail playback mode
(Figure 2). Press the menu key to return to the preview mode.
Figure 1 Figure 2
Access the playback thumbnails of video and audio files, push the
playback key to access the full screen playback mode, and push the
playback key once more to start playing back the files. Pushing the
playback key while video and audio files are played back may
suspend the playback, pushing the playback key once more may
continue playback, and pushing the menu key in process of
playback may return to the preview mode; When playback is over,
the machine may automatically return to the thumbnail playback
mode.
Note: Pushing the photo taking key while video files are
played back allows the machine to implement fast backward
playback, and pushing the recording key allows the machine
to implement fast forward playback.
2.6.2 Playing back the image files
After selecting the image file in the thumbnail playback mode,press
the playback key to enter the full-screen playback mode. Press the
audio recording key or photo taking key to scroll to the previous or
next file. Push the menu key to return to the preview mode.
Figure 3
2.6.3. Playing back IMP files
After selecting the IMP file in the playback mode, press the
playback key to enter the IMP playback mode. Press the audio
recording key or photo taking key to scroll to the previous or next
file and press the playback key to play it in full screen.
Note: During video recording, the operator may push once the
IMP key and mark the important file, or push and hold the
IMP key in preview mode to switch on/off the WIFI mode.
2.6.4 Exiting from the playback
Push the menu key in full screen playback mode to return to the
preview mode.
2.7 Interphone speech transmission function
Connect one end of the interphone connecting line to the interphone
interface of the body worn camera, connect the other end to an
interphone; true up the interphone, and implement talkback
function by operating the speech transmission key, such that the
body worn camera can serve as an on-shoulder microphone.
Note: 1. Before connecting the analog radio, please connect
the body worn camera first.
2.Please select the correct cable for different intercoms.
2.8 Resetting
Push the reset key if resetting is required.
Note: The operation may unlikely result in missing or
damages to file data.
Loading...