Uniform NPOS15 W User Manual

POS System

nPOS15-W

User Manual

1

Version 1.0

Contents

Safety information ..........................................................................................................................................2

Package contents ..........................................................................................................................................4

Chapter 1: Hardware Setup ............................................................................. 5

Getting to know your nPOS15 .....................................................................................................................5

Chapter 2: Using your nPOS15 ....................................................................... 7

Placing your nPOS15 on the table or desk ................................................................................................7

2

Safety information

Your POS is designed and tested to meet the latest standards of safety for information

technology equipment. However, to ensure your safety, it is important that you read the

following safety instructions.

Setting up your system

Read and follow all instructions in the documentation before you operate your system.

‧ Do not use this product near water or a heated source such as a radiator.
‧ Set up the system on a stable surface.
‧ Openings on the chassis are for ventilation. Do not block or cover these openings. Ensure

that you leave plenty of space around the system for ventilation. Never insert objects of

any kind into the ventilation openings.

‧ Use this product in environments with ambient temperatures between 0˚C and 40˚C

(32˚F~104˚F).

‧ If you use an extension cord, ensure that the total ampere rating of the devices

plugged into the extension cord does not exceed its ampere rating.

Care during use

• Do not walk on the power cord or allow anything to rest on it.

• Do not spill water or any other liquids on your system.

• When the system is turned off, a small amount of electrical current still flows. Always

unplug all power, modem, and network cables from the power outlets before cleaning

the system.

• The touch screen requires periodic cleaning to achieve the best touch sensitivity. Keep

the screen clean from foreign objects or excessive dust accumulation. To clean the

screen:

• Turn off the system and disconnect the power cord from the wall.

• Spray a small amount of a household glass cleaner onto the supplied cleaning cloth
and gently wipe the screen surface.

• Do not spray the cleaner directly on the screen.

• Do not use an abrasive cleaner or a coarse cloth when cleaning the screen.

• If you encounter the following technical problems with the product, unplug the power cord