Uniden WPP15W Owner's Manual

CHARGING YOUR WIRELESS POWER PAD-ENABLED DEVICES

Operation - continued

3

•

Non-compliant devices will not be damaged but will not receive power from the
Wireless Power Pad.

•

Once the Wireless Power Pad is powered on, the blue indicator light will turn on
immediately while the system status is checked. If the charge pad system is functioning
properly and there is no fault detected (i.e. keys, metal object or a hand placed on the
charge pad), then the blue indicator light will turn off in 3-5 seconds.
You are now ready to charge your Wireless Power Pad-enabled devices. Simply place
them on the Wireless Power Pad with the contact balls on the charging pad. The blue
indicator light will light up to show that your device is receiving wireless power. If a fault
is detected, the blue indicator light will (1) not appear upon initial power up or (2) turn
off during operation.

•

When not in use, the Wireless Power Pad will be in Sleep Mode. In this mode, the
charging surface and the blue indicator light both turn off.

•

You can simultaneously charge up to five Wireless Power Pad-enabled devices (cell
phones, music players, cameras, etc.) on the Wireless Power Pad. Make sure that the
devices are sitting flat on and making firm contact with the pad.

•

For best results, keep the Wireless Power Pad clean and free of contaminants.
Although designed for durability and years of trouble-free use, the original luster
can be best maintained through proper care and maintenance.

•

Make sure to place only Wireless Power Pad-enabled devices on the pad. Devices that
are not compliant will not receive power from the Wireless Power Pad.

Welcome to the world of wire-free power! Your Wireless Power Pad was designed
to be extremely easy to set up and use. With proper care, your charging pad can deliver
years of trouble-free operation.

SET UP

1. Place your Wireless Power Pad in your favourite location. Avoid placing on metallic
objects or metal countertops as this may prevent the charging pad from turning on.

2. Insert the DC power plug firmly into the Wireless Power Pad.

3.

Plug the AC adpator into the wall outlet.

Operation

2

Wireless Power Pad Overview

A. Device charging surface
B. DC power plug
C. Blue indicator light

1

WPP15W

Wireless Power Pad

9

One Year Limited Warranty

UNIDEN WPP15W WIRELESS POWER PAD
Important: Evidence of original purchase is required for warranty service.
Warrantor: Uniden Australia Pty Limited A.B.N. 58 001 865 498 / Uniden New Zealand Limited

Warranty only available in original country of purchase.
ELEMENT OF WARRANTY: Uniden warrants to the original retail owner for the duration of this warranty, its WPP15W Wireless Power
Pad (herein after referred to as the Product), to be free from defects in materials and craftsmanship with only the limitations or
exclusions set out below.
WARRANTY DURATION: This warranty to the original retail owner only, shall terminate and be of no further effect One (1) year after
the date of original retail sale. This warranty will be deemed invalid if the Product is; (A) Damaged or not maintained as reasonable and
necessary, (B) Modified, altered or used as part of any conversion kits, subassemblies, or any configurations not sold by Uniden, (C)
Improperly installed, (D) Repaired by someone other than an authorized Uniden Repair Agent for a defect or malfunction covered by
this warranty, (E) Used in conjunction with any equipment or parts or as part of a system not manufactured by Uniden, or (F) Where the
Serial Number label of the product has been removed or damaged beyond recognition. Warranty only valid in the country of original
retail/sale.

PARTS COVERED: This warranty covers for One (1) year, the Product and included accessories.
STATEMENT OF REMEDY: In the event that the Product does not conform to this warranty at any time while this warranty is in effect,

the warrantor at its discretion, will repair the defect or replace the Product and return it to you without charge for parts or service. This
warranty does not provide for reimbursement or payment of incidental or consequential damages. This EXPRESS WARRANTY is in
addition to and does not in any way affect your rights under the TRADE PRACTICES ACT 1974 (Cth) (Australia) or the CONSUMER
GUARANTEES ACT (New Zealand).
PROCEDURE FOR OBTAINING PERFORMANCE OR WARRANTY: In the event that the Product does not conform to this warranty, the
Product should be shipped or delivered, freight pre-paid, with evidence of original purchase (e.g. a copy of the sales docket), to the
warrantor at:

UNIDEN AUSTRALIA PTY LIMITED UNIDEN NEW ZEALAND LIMITED
SERVICE DIVISION SERVICE DIVISION

345 Princes Highway, Rockdale NSW 2216 150 Harris Road, East Tamaki, Manukau 2013
Fax [phone] Fax [phone]
www.uniden.com.au www.uniden.co.nz

8

Technical Specifications

Max Number of Devices: 5 (15W max)
Dimensions: 171.45mm (6.75”) W x 203.20mm (8.5”) L x 19.05mm (0.75”) H
Power input: 100 - 240 VAC, 0.4 Amps, 50 – 60 Hz
Power output:

15 Watts max
Weight: 113g (4.0 oz.)
Certifications: UL, CE, FCC

7

Care and Maintenance

•

To maintain the original luster and protect the charging pad finish, do not spill liquids or set

heavy objects on your Wireless Power Pad.

•

Food, dirt, dust, and other contaminants can easily be wiped away with an ammonia-based cleaner,

or isopropyl alcohol. Never submerse the Wireless Power Pad in water or place in a dishwasher.

WIRELESS POWER PAD SAFETY WARNING

•

NOT DISHWASHER SAFE

•

DO NOT IMMERSE IN WATER. KEEP AWAY FROM SINKS AND TUBS.

6

The following table lists potential problems and their suggested solutions:

Troubleshooting Guide

SolutionCauseProblem

Blue indicator light does
not turn on when a device
is placed on the Wireless
Power Pad.

Device does not indicate
(cell

phone display)
charging when placed on
the Wireless Power Pad

.

The device is not Wireless Power Pad-enabled.
The Wireless Power Pad wil l only power devices
that are Wireless Power Pa d compatible

.

Place only Wireless Power Pad-enabled devices on
the Wireless Power Pad

.

Device is not resting prop erly on
Wireless Power Pad surface

.

Ensure that device is rest ing flatly on and is mak ing
good contact with the

Wireless Power Pad surfac e.

Also, clean

pad surface if needed.

DC power plug not firmly p lugged into charging
pad or AC adapter not

plugged into wall socket.

Ensure AC adapter is plugg ed into a working outlet
and DC power plug is firml y inserted into the Wire less
Power Pad.

Wireless Power Pad is rest ing on a metallic surfac e.

Move the Wireless Power Pa d to a non-metallic
surface.

Metallic objects such as k eys or coins may be on t he
charging pad

.

Remove metal objects and c harging will resume
normally.

Device is not resting prop erly on the
Wireless Power Pad surface

.

Ensure that device is rest ing flatly on (contact b alls
down) and is making good c ontact with the Wireless
Power Pad surface. Also, c lean pad surface if need ed.

Blue indicator light
continuously

blinks
on and off (devices
do not charge).

Overload condition; too ma ny devices are resting
on the charging pad at one time.

Remove devices, one at a t ime, until blinking stop s.
Keep in mind that, in most instances, the Wireless
Power Pad can simultaneous ly charge up to five
devices.

Caution!

5

•

The WPP15W Wireles s Power Pad is not repr esented as waterproof. P lease read and
adhere to the inst ructions in the Care an d Maintnance section of this manual.

•

Changes or modific ations not expressly ap proved by the party resp onsible for
compliance could v oid the user’s authorit y to operate the equipme nt.

Maintenance and Usage

4

•

The AC wall outlet shall be located near the Wireless Power Pad a nd should be easily
accessible.

•

The DC power plug is designed to fit snug gly into the Wireless Po wer Pad and should
be inserted firmly to make a good electri cal connection.

•

The Wireless Power Pad can charge up to f ive Wireless Power Pad-e nabled devices
(cell phones, musi c players, camera, etc. ). However, certain devi ces or combination of
devices may requir e more power than is av ailable. When this happe ns, the indicator
light will blink. Remove some devices to remedy this problem.

•

Ensure that dirt o r other contaminants ar e not on the Wireless Po wer Pad. Charging
will not occur if proper contact between the Wireless Power Pad-e nabled device
and charging pad i s not made.

•

Ensure that the de vice is resting flatly on the Wireless Power Pa d. Charging will not
occur if the devic e being charged is in a tipped position and pro per contact is not
made.

© 2009 Uniden Australia Pty. Limited/Uniden New Zealand Limited. Printed in PRC.