Uniden TRU5885, TRU5885-2 User Manual

www.uniden.com

Contents

WELCOME/FEATURES 3 QUICK REFERENCE GUIDE 5 CONTROLS AND FUNCTIONS 6 GETTING STARTED 8

Read this First 8 Checking the Package Contents 9 Setting up the Phone 10 Terminology 14 Setting Caller ID Options 15 Selecting a Language 17

BASICS 18

Making and Receiving Calls 18 Redialing a Call 19 Ringer Volume Setup 20 Ringer Tone Setting 20 Distinctive Ringer Setup 21 Adjusting the Earpiece and Handset Speaker Volume 21 Mute Microphone 22 Tone Dialing Switch-over 22 Traveling Out-of-Range 22 Selecting a Different Channel 23 Find Handset 23 3-Way Conferencing 23 Transferring a Call 24 Flash and Call Waiting 25 New Message LED 25

PHONEBOOK 26

Storing Phone Numbers, Names,

Distinctive Rings, and Speed Dial 26 Steps for Entering Names and Special Characters 28 Viewing the Phonebook 30 Making Calls Using the Phonebook 31 Speed Dialing 31

Editing or Erasing a Stored Name, Phone Number

Distinctive Ring, and Speed Dial 32 RocketDial (One Touch Dialing) 33 Chain Dialing 34 Memory Dialing (base only) 34

CALLER ID 35

Viewing the Caller ID List 36 Deleting Information from the Caller ID List 37 Using the Caller ID Message List 38 Call Waiting Deluxe Features 39

THE INTEGRATED ANSWERING DEVICE 40

Turning the Answering System On/Off 40 Setting up your Answering System 41 Using your Answering System 47 Remote Operation 50

EXPANDING YOUR PHONE 53

How to Distinguish the Original Handset

and the Second Handset 53 Registering the Second Handset 53 Call Transfer Feature 54 Second Handset Operation 55

ADDITIONAL INFORMATION 57

Changing the Digital Security Code 57 Installing the Beltclip 58 Headset Installation 58 Note on Power Sources 59 Maintenance 59 General Information 60

TROUBLESHOOTING 61 PRECAUTIONS & WARRANTY 63 I.C. NOTICE 65 INDEX 66 REMOTE OPERATION CARD 67

[ 2 ]

Welcome

Features

Congratulations on your purchase of the Uniden cordless telephone. This phone is designed and engineered to exacting standards for reliability, long life and outstanding performance. To enjoy the best performance from this phone’s features, please read this manual carefully and save it for future reference.

Note: Some illustrations in this manual may differ from the actual unit for

explanation purposes.

As an Energy Star® Partner, Uniden has determined that this product or product models meets the Energy Star® guidelines for energy efficiency. Energy Star® is a U.S. registered mark.

Note: Energy Star® applies to TRU5885 only.

• 5.8 GHz Spread Spectrum Technology

• Integrated Answering Device (Trilingual Announcement Option)

• Two Handset Expandability

• Hands Free Speakerphone in the Handset

• Caller ID and Call Waiting Caller ID

• Dynamic Memory Location for Caller ID Messages and Phonebook Locations (up to 100 numbers in total)

• Trilingual Language Option (Handset)

• 4 Hour Talk Time

• 8 Day Standby Battery Life

• 3-Line, 16 Character Backlit Handset Display

• One Touch Dialing

• Call Transfer

• 32 Digit Redial / 3 Last Number Redial Locations (handset only)

WELCOME/FEATURES [ 3 ]

• 10 Distinctive Ring Options (6 ringers and 4 melodies)

• Mute Feature

• Flash and Pause

• Find Handset

• Hearing Aid Compatible

• Tone/Pulse Dialing

• Handset Earpiece, Handset Speaker and Ringer Volume Control

• 10 Number Memory on the Base

• Base Speakerphone with Keypad

• Base Speaker Volume

• 3-way Conference Operation

• Handset Remote Operation

• Call Timer

WELCOME/FEATURES[ 4 ]

The TRU5885 series features include AutoTalk™ and AutoStandby™. AutoTalk allows you to answer a call by just removing the handset from the base so you don’t have to waste time pushing buttons. AutoStandby allows you to hang up by simply returning the handset to the base.

To protect you against mis-billed calls, which might result from your phone being activated by other equipment, the TRU5885 series has

Random Code™ digital security, which automatically selects one of over 65,000 digital

security codes for the handset and base.

RocketDial™ is a one touch speed dial key that automatically dials your most important or frequently called number. The number dialed, is a preset number stored by the user.

Digital Spread Spectrum Technology utilizes a “wider frequency band” vs. a “single narrow band” used in standard digital transmissions. The result is a more secure conversation with the clarity of digital sound, extended range, and minimal interference from other cordless phones.

Be sure to visit our web site: www.uniden.com

Uniden® is a registered trademark of Uniden America Corporation. AutoTalk, AutoStandby, Random Code, and RocketDial are trademarks of Uniden America Corporation.

QUICK REFERENCE GUIDE [ 5 ]

UICK

EFERENCE

UIDE

INSTALL THE HANDSET BATTERY

Remove the cover.

Connect the battery pack connector with the correct polarity.

Replace the cover.

PLUG INTO AC POWER

Plug the AC adapter cord into the base unit and then to a 120V AC outlet.

Place the handset in the base.

Note:

You must charge the battery pack continuously

for 15-20 hours

before using the phone.

Step 1 Charging the Battery Step 2 Connecting

Step 3 Setting up the Caller

ID Options/Language

Step 4 Setting up

Answering System

CONNECT TO A PHONE LINE

When the handset battery pack is fully charged, plug the telephone cord into the base unit and then into a telephone wall jack.

Your phone is set for tone dialing. If your local network requires pulse dialing, please see “Setting up the phone, Choose the dialing mode” in your owner’s manual.

Note: Three Caller ID options are available: Auto Talk, Caller ID on Call Waiting (CIDCW) and Area Code.

TO TURN THE ANSWERING SYSTEM ON/OFF

Press answer on/off to turn On the system. To turn Off the system, press

answer on/off again.

TO SET GREETING MESSAGE

Press and hold greeting.

Start recording your message. Position yourself as near to the base as possible.

When finished, press

greeting

or .

TO SELECT CALLER ID OPTIONS

Press menu/mute.

Press

+ or - to move the pointer to

“Caller ID Setup”, then press select/ch.

Press+or-to move the pointer to an option, then press

select/ch

Press

+or-

to change the

option setting.

Press

select/ch and return the

handset to the base.

TO CHOOSE THE LANGUAGE

Press menu/mute.

Press

+ or - to move the pointer

to “Language”, then press select/ch.

Press

+ or - to change the

option setting.

Press select/ch and return the handset to the base.

Controls and Functions

CONTROLS AND FUNCTIONS[ 6 ]

8 9

15 16

17 18

19 20 21

1. Handset Antenna

2. Headset Jack Cover

3. Beltclip Hole

4. Handset Battery Compartment

5. New Message LED

6. Handset Earpiece

7. LCD Display

8. call id (Caller ID)/

 (right cursor) Key

9. (Phonebook)/RocketDial/

 (left cursor) Key

10. spkr (speaker) Key

11. (repeat)/1 Key

12. (delete) (for remote operation)/4 Key

13. /tone Key

14. redial/p (pause) Key

15. Menu/ (mute) Key

16. Handset Microphone

17. Talk/flash Key

18.

+ (up) Key

19. - (down)/remote Key

20. End Key

21. (skip)/3 Key

22. # Key

23. Xfer (transfer)/ del (delete) Key

24. Select/ch (channel) Key

25. Handset Charging Contacts

26. Hands Free Speaker

CONTROLS AND FUNCTIONS [ 7]

37 38 39 40 52 53

29 30

31 32

45 46

33 34

47 48

49 50

(TRU5885-2 only)

27. Base Antenna

28. Base Speaker

29. Status LED

30. Message Counter Display

31. (repeat) Key

32. Answer on/off Key

33. Greeting Key

34. Redial/p (pause) Key

35. Menu Key

36. Base Charging Contacts

37. Memory Key

38. Flash Key

39. Find handset/transfer Key

40. /tone Key

41. (play/stop) Key

42. (skip) Key

43. (delete) Key

44. Memo rec Key

45. Mute Key

46. Set/ringer Key

47.

(up) Key

48.

(down) Key

49. (talk) Key/Speaker LED

50. # Key

51. Microphone

52. Telephone Line Jack

53. DC Power Input

54. Charging Contacts (TRU5885-2 only)

55. Charge LED (TRU5885-2 only)

56. DC Power Input (TRU5885-2 only)

GETTING STARTED[ 8 ]

Read this First

This cordless telephone must be set up before use. Follow these steps:

About the digital security code

This cordless telephone uses a digital security code to prevent unauthorized access to your base unit. This security code prevents other cordless handsets from making calls through your base unit. If you want to change the security code, see page 57.

Step 1 (page 9)

Unpack the telephone and accessories.

Step 2 (page 10)

Next, choose the best location to set up the base unit.

Step 3 (page 11 to 14)

Then, insert the battery pack into the handset. Connect the base unit. You must charge the battery pack

for 15-20 hours before plugging

into the phone line and using the phone.

Step 4 (page 15 to 17)

Finally, set the Caller ID options, and store your area code in the memory to use the Caller ID service. Choose the language of your display.

Note: Skip the area code setting if your calling area

requires 10-digit dialing.

GETTING STARTED [ 9 ]

Checking the Package Contents

Make sure you have received the following items in the package. If any of these items are missing or damaged, contact the Uniden Parts Department.

• Base unit (1)

• Handset [TRU5885 (1) / TRU5885-2 (2)*]

• AC adapter [TRU5885 (1) / TRU5885-2 (2)]

• Rechargeable battery [TRU5885 (1) / TRU5885-2 (2)]

• Telephone cord (1)

• Beltclip [TRU5885 (1) / TRU5885-2 (2)]

• Charger (1) [TRU5885-2 only]

Also included:

• This Owner’s Manual

• Other Printed Material

* For operations and restrictions on the second handset, read “Expanding Your Phone”

on page 53.

GETTING STARTED

Uniden Parts Department (800) 554-3988 Hours: M-F 7:00 a.m. to 5:00 p.m. CST.

We can also be reached on the web at

www.uniden.com.

GETTING STARTED[ 10 ]

Setting up the Phone

Do the following steps:

A. Choose the best location C. Connect the base unit B. Install the battery pack D. Choose the dialing mode

A. Choose the best location

Before choosing a location for your new phone, read “Installation Considerations” on page 64. Here are some important guidelines you should consider:

Avoid excessive moisture, extremely low temperatures, dust, mechanical vibration, or shock

Avoid heat sources, such as radiators, air ducts, and sunlight

Avoid television sets and other electronic equipment

Avoid noise sources such as a window by a street with heavy traffic

Avoid microwave ovens

Avoid personal computers

Avoid other cordless telephones

Choose a central location

GETTING STARTED

GETTING STARTED [ 11 ]

B. Install the battery pack

Charge the battery pack for at least 15-20 hours before plugging the phone line into your base unit.

1) Press down on the battery cover release and slide the cover down until it comes off.

2) Connect the battery pack connector observing the correct polarity (black and red wires) to the jack inside the battery compartment.

Do not exert any force on this connection. It could cause damage to the battery or to the handset. The plastic connectors will fit together in only one way. Once you are certain that you have made a good connection, then insert the battery pack into the battery compartment. Do not pinch the wires.

3) Securely close the battery compartment cover by sliding it up until it snaps into place.

4) Place the handset in the charging cradle with the keypad facing forward.

• Use only the Uniden

battery (BT-446) supplied with your phone.

Replacement batteries are also available through the Uniden Parts Department. (See page 9.)

• Recharge your phone on a regular basis by returning the handset to the base after each phone call.

GETTING STARTED[ 12 ]

Battery use time (per charge)

Fully charged

• 4 hours continuous use

• 8 days when the handset is in the standby mode

Cleaning the battery charging contacts

To maintain a good charge, it is important to clean the battery contacts on the handset and base unit with a dry cloth or a pencil eraser about once a month. Do not use any liquids or solvents.

contacts

When you charge the handset, Caller ID summary screen and the name of the handset,

HS1 appears. For TRU5885-2, if HS2 appears, you are

charging the handset No. 2.

The last number dialed in the redial memory is retained for up to 2 minutes while you replace the battery pack.

Low battery alert

When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is in the standby mode, ”

Low Battery”

appears on the LCD and none of the keys will operate. If the phone is in use, ”

Low Battery” appears and the handset beeps.

Complete your conversation as quickly as possible and return the handset to the base unit for charging.

GETTING STARTED

GETTING STARTED [ 13 ]

• Use only the supplied AD-313 AC adapter.

Do not use any other AC adapter.

• Connect the AC adapter to a continuous power supply.

• Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.

C. Connect the base unit

1) Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet.

“ ” appears on the base, and it will change to “ ” after a few seconds. “ ” indicates that there are no messages in your answering system.

2) Set the base and charger (for TRU5885-2 only) on a desk or tabletop, and place the handset in the base unit as shown.

3) Make sure the

status LED illuminates. If the LED

does not illuminate, check to see that the AC adapter is plugged in and that the handset makes good contact with the base charging contacts.

Place the power cord so that it does not create a trip hazard or where it could become chafed and create a fire or electrical hazard.

• After installing the battery pack in the handset, charge your handset at least 15-20 hours

before plugging into the phone line. Once the handset battery pack is fully charged, connect the telephone line cord to the base and telephone wall outlet.

4) Connect the telephone line cord to the TEL LINE jack and to a telephone outlet once the handset is fully charged.

If your telephone outlet isn't modular type, contact your telephone company for assistance.

Modular

GETTING STARTED[ 14 ]

D. Choose the dialing mode

Most phone systems use tone dialing, which sends DTMF tones through the phone lines. However some phone systems still use pulse dialing such as in rural areas. The default setting is tone dialing. Depending on your dialing system, set the mode as follows:

1) When the phone is in the standby mode, press

menu/mute.

2) Press + or - to move the pointer to “

Dial Mode”.

3) Press select/ch and the display will show the current setting. (The initial setting is Tone.)

4) Press + or - to change the selection.

5) Press select/ch, and you will hear a confirmation tone.

6) Press end to exit.

Throughout this manual, terms such as Standby and Talk Mode are used. Below is the terminology explanation.

Standby Mode - The handset is not in use, is off the base, and talk/flash or spkr have not been pressed. A dial tone is not present. Talk Mode - The handset is not in the base and talk/flash or spkr has been pressed enabling a dial tone. “

Talk” appears on the display.

Terminology

• If you are not sure of your dialing system, set the unit to tone dialing. Make a trial call. If the call connects, leave the setting as is, otherwise set the unit to pulse dialing.

• If your phone system requires pulse dialing and you need to send DTMF tones in certain situations during a call, you may “switch-over” to tone dialing. (Refer to “Tone Dialing Switchover” on page 22.)

GETTING STARTED

GETTING STARTED [ 15 ]

To change your Caller ID options:

1) When the phone is in the standby mode, press menu/mute.

2) Press + or - to move the pointer to “

Caller ID Setup”,

then press select/ch.

3) Press + or - to choose “

Auto Talk” or “CIDCW”,

then press select/ch.

4) Press + or - to change the selection. AutoTalk: “

Auto Talk On” or “Auto Talk Off”

CIDCW: “

CIDCW On”, “CW Deluxe On” or “CIDCW Off”

5) Press select/ch, and you will hear a confirmation tone.

6) Press end to exit.

Setting Caller ID Options

There are three Caller ID setup options available: AutoTalk, CIDCW (Caller ID on Call Waiting), and Area Code. See page 16 for Area Code setup instructions.

AutoTalk allows you to answer the phone without pressing talk/flash or spkr. If the phone rings when AutoTalk is On, simply remove the handset from the base and the phone automatically answers the call. Or if the handset is not in the base, press any number key,

/tone, or # to answer the call. If you set AutoTalk to Off, you must press talk/flash or

spkr to answer the call.

Caller ID on Call Waiting (CIDCW) performs the same as regular Caller ID on a call waiting number. CW Deluxe allows you to handle call waiting calls in seven different ways. (See page 39.)

You must subscribe to CIDCW from your phone company in order to use this feature.

The CW Deluxe is a separate service available through your phone company.

GETTING STARTED[ 16 ]

Entering Your Area Code

If you enter a 3-digit area code number in the “Area Code” option, your local area code does not appear in Caller ID messages. For calls received from outside your local area code, you will see a full 10-digit number.

1) When the phone is in the standby mode, press

menu/mute.

2) Press + or - to move the pointer to “

Caller ID Setup”,

then press select/ch.

3) Press + or - to move the pointer to “

Area Code”,

then press select/ch.

4) Use the number keypad (0 to 9) to enter a 3-digit area code.

5) Press select/ch, and you will hear a confirmation tone.

6) Press end to exit.

• If your calling area requires 10-digit dialing, do not program this option.

• When the area code has already been stored in memory, the stored area code will be displayed. To change it, press

xfer/del three times. Then enter the new area code. Or you can use

/RocketDial/



or call id/ to move the cursor and edit area code.

GETTING STARTED

GETTING STARTED [ 17 ]

Language option can be used to choose the language of your display. You can select English, French, or Spanish.

1) When the phone is in the standby mode, press menu/mute.

2) Press + or - to move the pointer to “

Language“,

then press select/ch.

3) Press + or - to choose English, French (Français), or Spanish (Español).

4) Press select/ch, and you will hear a confirmation tone.

5) Press end to exit.

Selecting a Language

BASICS[ 18 ]

Making and Receiving Calls

On the handset, you may also use the speakerphone while talking on your phone. Using the handset speakerphone is called “hands-free conversation”. This feature allows you to easily communicate while performing other tasks, such as cooking. appears during hands-free conversation.

You can easily switch a call from normal conversation to “hands-free conversation”. To switch a call, press

spkr during the call.

• Refer to page 15 “Setting Caller ID Options” to turn the AutoTalk feature On if desired. Any key answer can be used only when AutoTalk is set to On.

• The handset microphone is located on the bottom of the handset (see “Controls and Functions” on page 6). Position yourself as near to the handset as possible and speak clearly.

• The base microphone is located under the base. Position yourself as near to the base as possible and speak clearly.

From the Handset From the base

Normal conversation Hands-free conversation

To answer a call Handset on the Base Press (talk).

Pick up the handset (AutoTalk) or pick up the handset and press

talk/flash.

Handset off the Base Handset off the Base

Press any number key, /tone, Press spkr. or

# (Any Key Answer),

or press talk/flash.

To make a call

Handset off the Base Handset off the Base

1) Press talk/flash. 1) Press spkr. 1) Press (talk).

2) Listen for the dial tone. 2) Listen for the dial tone. 2) Listen for the dial tone.

3) Dial the number. 3) Dial the number. 3) Dial the number.

OR OR

Dial the number, then Dial the number, then press talk/flash. press spkr.

Note: If a call is not established, you will hear a beep

and “Unavailable” will appear in the display. To hang up Press end, or return the handset to the base (AutoStandby). Press (talk). To enter a pause When you dial the number, press redial/p. Pressing (talk).

within the dialing “

P” appears in the display, which represents a pause. When you dial the number,

sequence press redial/p.

BASICS

BASICS [ 19 ]

Redialing a Call

The last three phone numbers dialed can be quickly redialed.

Redialing from Standby Mode

1) Press redial/p. The phone number that was last dialed appears on the display.

2) Press

redial/p again. Each press of redial/p will display

one of the last three numbers dialed.

3) Press talk/flash or spkr. The selected number is dialed.

4) To hang up, press

end.

• If the number exceeds 32 digits, only the first 32 digits are retained in redial memory.

• If the redial memory is empty, you will hear a beep.

Redialing from the Base

1) To call the last number dialed from the base, press (talk).

2) Press redial on the base. The last number dialed from the base is redialed.

3) To hang up, press (talk).

Redialing from Talk Mode

1) Press talk/flash or spkr.

2) Press redial/p. The last number dialed will be displayed and redialed.

3) To hang up, press end.

• If you have not pressed any key for 30 seconds, the phone returns to standby mode.

• If you press

end, the operation is canceled and the phone will

return to the standby mode.

When using the redial feature in talk mode, only the last number dialed will be displayed.

[ 20 ]

1) When the phone is in the standby mode, press menu/mute.

2) Press + or - to move the pointer to “

Ringer Volume”.

3) Press select/ch.

4) Press

+ or - to move the pointer through the ringer settings (Ringer Off, Ringer Low, or Ringer High). You will hear a ringer or melody at the selected volume.

5) Press select/ch, you will hear a confirmation tone.

6) Press end to exit.

Ringer Mute (temporarily)

You can temporarily mute the ringer tone. When the handset is off the base and the phone is ringing, press end. The ringer tone will return to the previous setting starting with the next incoming call.

• If you select “Ringer Off”, “

<Ringer Off>”

appears on the display when you make or receive calls, or charge the handset.

Ringer Volume Setup

1) When the phone is in the standby mode, press menu/mute.

2) Press + or - to move the pointer to “

Ringer Tones”, then

press select/ch. You can choose from 6 ringers or 4 melodies:

- Ringers [Flicker, Clatter, Leap Frog, Ping Ball, Reminder, Soft Alert]

- Melodies [Beethoven9, For Elise (Elise), Merry Christmas (Merry-Xmas), Home Sweet Home (Hm Swt Hm)]

3) Press

+ or - to move the pointer. You will hear the ringer or

the melody as you scroll through the options.

4) Press select/ch and you will hear a confirmation tone.

5) Press

end to exit.

Ringer Tone Setting

BASICS

• If you set the ringer to Off, the ringer tone will not sound.

+ 50 hidden pages

Uniden TRU5885, TRU5885-2 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual