Uniden CEZ202, Slimline Series User Manual
Slimline Phone User's Guide
What's in the box?
If any items are missing
or damaged, contact
our Customer Care Line
immediately. Never use
damaged products.
Need Help? You can get
answers 24/7 at our
website: www.uniden.com.
If You... Contact Uniden’s... Phone
have a question or problem Customer Care Line* 800-297-1023
need a part or accessory Parts Department* 800-554-3988
need special assistance due
to a disability
Accessibility Help Line
800-874-9314
(voice or TTY)
* During regular business hours, Central Standard Time. Visit our website for detailed
business hours.
Important safety precautions
When using your telephone equipment, always follow basic safety
precautions to reduce the risk of re, electric shock and injury to
persons, including the following:
Do not use this product near water, for example, near a bath tub,
wash bowl, kitchen sink or laundry tub, in a wet basement or near a
swimming pool.
Avoid using a telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lightning.
Do not use the telephone to report a gas leak in the vicinity of the leak.
SAVE THESE INSTRUCTIONS
Uniden works to reduce lead content in our PVC coated cords in our products and
accessories.
Warning! The cords on this product and/or accessories contain lead,
a chemical known to the State of California to cause birth defects or
other reproductive harm. Wash hands after handling.
Uniden® is a registered trademark of Uniden America Corporation.
The pictures in this manual are used for examples only. Your actual phone may not look
exactly like the pictures.
►
►
►
Base
Telephone
cord
Coiled
handset cord
Handset
Connecting the Phone
Test the connection
Pick up the handset and listen for a dial tone. If you don't hear
one, check the connection between the base and the phone jack.
Make a test call. If the dial won't stop when you dial, check the
Tone/pulse switch: if it’s on tone, change it to pulse, and vice
versa. Try your test call again.
If there is static or noise on the line, see the section on Solving
Problems.
1)
2)
Use the coiled cord to
connect the handset
to the base (use the
jack marked with the
handset icon).
Use the telephone
cord to connect the
line jack to a standard
telephone wall jack.
Route the
cord through
the channel.
Route the
cord through
the channel.
Use the coiled cord to
connect the handset
to the base (use the
jack marked with the
handset icon).
Use the telephone
cord to connect the
line jack to a standard
telephone wall jack.
Route the
cord through
the channel.
Route the
cord through
the channel.
Loading...