Introduction
Welcome to the world of sophisticated, early warning laser/radar
detection. You have purchased one of the most advanced laser/radar
detectors available. The LRD 6199SWS is a complete integrated
laser/radar detector. It responds to the X-, K-, and Ka-SuperWideband
radar guns in use today and also provides 360° detection of the latest
speed monitoring system — the laser gun. The built-in Safety Warning
System (SWS™) is capable of detecting a hazardous warning signal
transmitted on the K-band.
The LRD 6199SWS provides distinct visual and audio alerts to warn you
of the presence of X-, K-, and Ka-SuperWideband radar signals as well as
IR laser signals. You can drive with confidence when you bring along the
LRD 6199SWS.
The LRD 6199SWS employs Super Stalker Technology (SST), a
state-of-the-art electronic system designed to make this radar detector
invisible to all current VG-2 radar detector detectors. The LRD 6199SWS
also uses the new D.R.O. (Dielectric Resonant Oscillator) and E.D.I.T.
(Electronic Data Interference Terminator) circuitry, giving more reliable
performance.
We are certain that you will enjoy the LRD 6199SWS, and to ensure that
you get the most from its features, please read this Operating Guide
carefully before installing and operating the unit.
Feature Highlights
• 360° Laser Detection • Safety Warning System™
• Complete 4-Band Coverage • 4 Alarm Tones
• Super Wideband • VG-2 Undetectable
• K/Ka Priority • Pulse Detection
• Signal Strength Meter • Warning Lights
• Visual/Audio Only Mode • Auto Mute Mode
• City and Highway Modes • Self Test
1
Speed Detection Systems
A speed detection device (often called a radar gun) sends out either a
microwave signal or beam of light. When this signal reaches its target,
part of the signal is reflected or bounced back toward the emitting gun.
The time required for the signal to leave the gun, bounce off an object,
and return is used to determine a vehicle’s distance and speed.
Radar
Radar (Radio Detection and Ranging) is a microwave system for
detecting the speed of moving objects by reflected pulses of high
frequency radio waves. There are 3 radar bands (microwave frequencies):
Xband (10.49 to 10.56GHz), Kband (24.04 to 24.26GHz), and the
“superwide” Ka band (33.4 GHz to 36 GHz).
The X band was the first used for traffic, followed by the K band which is
harder to detect (most instant-on radar is K band). The Ka band was
introduced in 1987, and widened to Ka SuperWideband in 1990 by the
FCC. The LRD 6199SWS monitors all current radar bands including the
entire Ka SuperWideband.
The radar beam is cone shaped — the narrower the beam, the greater the
resolution. A moving vehicle reflects radar signals back towards the radar
gun. The LRD 6199SWS can detect the signals emitted by radar guns,
and it will sound an audio alarm and flash a warning indicator.
For continuously transmitting radar, use the LRD 6199SWS to get
accurate detection from a safe distance. Weak signals cause the audio and
visual alarms to sound intermittently, but as the signal gets stronger (the
closer you get to the radar gun), both alarms increase in intensity.
Instant-on transmitters fire a short radar pulse beam at a vehicle and
instantly read its speed. When detected at a distance, you will hear a few
beeps and see the strength meter begin to light. Instant-On radar signals
are the most difficult to detect at a safe distance because they are
transmitted only when directed at you or at a vehicle directly ahead of
you.
2
Laser
The Laser Speed Detection System, also called LIDAR (for Light
D
etection and Ranging), uses a laser gun that emits infrared light pulses
just outside the spectrum of visible light. Each reflected pulse measures
the speed of the object coming toward or going away from the laser gun.
Unlike radar, the laser gun emits a very narrow beam of light, so it can
pinpoint a speeding car within traffic. The infrared beam spreads out, but
slowly and over a longer distance than a radar signal.
The laser gun can acquire a speed reading as quickly as 0.3 seconds,
sometimes less. However, since it isn’t easy to accurately aim at and hit a
moving target, an operator often moves the laser gun in several directions
to get a reading. So laser signals are emitted continuously for a few
seconds for each speed measurement. The LRD 6199SWS can detect
these light pulses from as far away as 1.5 miles, which is about four times
the effective range of a laser gun (2,000 feet), and about ten times its
average operating range (500-800 feet).
Note: To be safe, do not ignore any warnings. Although there are other
types of radar signals that may cause interference, when the
LRD 6199SWS detects a signal, be on the alert. It is important to
exercise caution at all times.
3
Included with Your Radar Detector
Laser/Radar Detector
Operating Guide
Owner’s Guide
Straight Power Cord
njdfjnjnjfnjfjn
jnkjnjksnkjsnfj
dfksfmkm
kfmkmkmlf
sfkkmmfmsmsm\
kkoioionksnkln
njdfjnjnjfnjfjn
mmkmkkl
jnkjnjksnkjsnfj
dfksfmkm
skdmkmkm
kfmkmkmlf
sdmkmfmmmk
sfkkmmfmsmsm\
mdmklkkkml
kkoioionksnkln
mmkkllmmk
mmkmkkl
skdmkmkm
njdfjnjnjfnjfjn
sdmkmfmmmk
jnkjnjksnkjsnfj
mdmklkkkml
mmkkllmmk
dfksfmkm
njdfjnjnjfnjfjn
kfmkmkmlf
jnkjnjksnkjsnfj
sfkkmmfmsmsm\
dfksfmkm
kkoioionksnkln
kfmkmkmlf
sfkkmmfmsmsm\
mmkmkkl
kkoioionksnkln
skdmkmkm
mmkmkkl
sdmkmfmmmk
skdmkmkm
sdmkmfmmmk
mdmklkkkml
mdmklkkkml
mmkkllmmk
mmkkllmmk
Printed
Material
njdfjnjnjfnjfjn
jnkjnjksnkjsnfj
dfksfmkm
kfmkmkmlf
sfkkmmfmsmsm\
kkoioionksnkln
njdfjnjnjfnjfjn
mmkmkkl
jnkjnjksnkjsnfj
skdmkmkm
dfksfmkm
kfmkmkmlf
sfkkmmfmsmsm\
sdmkmfmmmk
mdmklkkkml
kkoioionksnkln
mmkkllmmk
mmkmkkl
njdfjnjnjfnjfjn
skdmkmkm
sdmkmfmmmk
jnkjnjksnkjsnfj
mdmklkkkml
dfksfmkm
mmkkllmmk
kfmkmkmlf
njdfjnjnjfnjfjn
sfkkmmfmsmsm\
jnkjnjksnkjsnfj
dfksfmkm
kkoioionksnkln
kfmkmkmlf
sfkkmmfmsmsm\
kkoioionksnkln
mmkmkkl
skdmkmkm
sdmkmfmmmk
mmkmkkl
skdmkmkm
mdmklkkkml
sdmkmfmmmk
mmkkllmmk
mdmklkkkml
mmkkllmmk
Windshield
Clip
Fuses and
Spare Parts
If any of these items are missing or damaged, contact your dealer
immediately. Be sure to complete and mail the Product Registration Card.
4
Controls and Functions
1
2
3
4
5
DC12V
9
8
1. Clip Release — Press the clip release button to remove the
LRD 6199SWS from the windshield mounting clip.
2. Rear and Side Laser Detector Lenses — For rear and side
detection of laser signals.
3. City Button — Press the CITY button to help reduce X-band false
alarms while driving in the city. When you turn on the City Mode,
the City indicator turns on. While driving on highways, turn off
the City Mode for long-range detection.
4. Audio Button — Press the AUDIO button to activate the Audio
Alert Only operation. All the LEDs dim, and the signal strength
meter is disabled.
Note: To operate with visual alert only, set the volume control to
the minimum. Remember though, that if the volume control is
turned down and Audio Only operation is selected, the alarm
features are completely disabled.
5. Mute Button — Press the MUTE button to activate the Auto Mute
feature, which produces a full alert level when a signal is first
received, then automatically reduces to half volume for the rest of
the warning.
7
6
5
6. DC 12V Power Input — Connect the DC power cord here.
Note: Use on a Uniden® supplied power cord or its
replacement.
7. LED Display — LEDs display visual alerts, signal strength, and
operation mode.
8. On-Off/Volume Control — Turns the power on and adjusts the
Audio Alert volume.
9. Speaker — Sounds audio alert. There are four different audio alert
tones to distinguish each type of signal received. When you
become familiar with all the distinct alert tones, you can operate
the LRD 6199SWS just by listening, devoting your full attention
to the traffic in front of you.
6
XKKaL P12 3 4 CMSWS
12345
1. X-Band Signal Indicator — A green LED lights and blinks to
indicate the presence of an X-band radar signal. The blink rate
increases as the radar source gets closer. A distinct audio alert is
also heard.
2. K-Band Indicator — An amber (orange) LED lights and blinks to
indicate the presence of a K-band radar. The blink rate increases
as the radar source gets closer. A distinct audio alert is also heard.
3. Ka-SuperWideband Signal Indicator — A yellow LED lights and
blinks to indicate the presence of a Ka-SuperWideband radar
signal. The blink rate increases as the radar source gets closer. A
distinct audio alert is also heard.
4. Laser Signal Indicator — A red LED under L lights and blinks to
indicate the presence of a laser signal. A distinct audio alert is also
heard.
5. SWS Signal Indicator — When an early warning hazard or
informational signal is detected, the yellow SWS LED begins to
blink and the amber K-band LED lights. A distinct audio alert is
also heard.
6. Power-On Indicator — A green LED under P lights to indicate
power is being supplied to the unit and the unit is turned on.
7. LED Signal Strength Meter — Four LEDs give an accurate visual
indication of the strength of radar or laser signals.
8. City Mode Indicator — A green LED under C lights to indicate
that you selected City Mode.
9. Auto Mute Indicator — A red LED under M lights to indicate that
you selected the Auto Mute feature.
Note: Every time you turn on the LRD 6199SWS, a self-test is
performed for all LEDs and Alert tones. You will hear in-order
four distinct tones for the X-, K-, and Ka-SuperWideband radar
bands, as well as for laser.
6
7
89
7
Installation
The LRD 6199SWS uses a highly sensitive horn-type antenna and IR
laser sensor to receive radar/laser signals. Its sensitivity and range depend
on the method of installation and the direction of the antenna/sensor in
relation to the signal source. The inherent nature of radar waves makes
them reflect off metallic surfaces. This is why these waves are so useful
for measuring the speed of a vehicle. The IR laser light may reflect only
from shiny surfaces. Both radar waves and IR laser light will, however,
pass through plastic or glass.
Before you decide where to put your radar detector, please keep in mind
these two important factors:
• For safety, do not mount the LRD 6199SWS in a location where it
will obstruct your driving vision.
• Most vehicles have the top part of the windshield tinted. Mounting
the LRD 6199SWS behind tinted or mirrored glass may reduce the
effectiveness of laser detection by reducing the amount of laser light
received by the Detector.
Helpful Tips
The antenna and the forward looking
sensor are located behind the rear
panel of the unit, (and the rear- and
side-looking sensors are located on
top of the unit), directly behind the
mode selection keys. The antenna
and sensors should not be obstructed
by metal or metallic surfaces and
should be pointed at the horizon for
accurate long-range detection.
• Do not mount the unit behind the windshield wiper blades, radio
antenna, tinted glass area, or mirrored glass. Be sure the unit is free
from obstruction by seat backs, rear view mirror, sun visors, or the
ceiling of the automobile.
• Do not mount the unit in front of the heater or defroster vents.
• Do not leave the unit in direct sunlight or in the glove compartment
of a closed car for long periods of time, as extreme changes in
temperature may cause internal damage. Also, removing the unit
from the windshield makes you less susceptible to break-in and
theft.
8
Adjusting the Windshield Mounting Clip
1. The metal portion of the bracket locks into the plastic portion at
three different positions. These positions can be used for vehicles
with different vertical angles of their windshields. The back
position can be used for vehicles with windshields that are slanted
back.
2. For optimum laser detection, bend the angled portion of the
windshield mounting bracket so that the LRD 6199SWS is parallel
to the road surface. Be sure the LRD 6199SWS is mounted so it is
free of obstructions from seat backs, rear view mirror, sun visors,
or the ceiling of the automobile. There must be a clear 360° line of
sight to the outside of the vehicle.
To mount the LRD 6199SWS:
1. Insert the windshield clip into the LRD 6199SWS.
2. Place the bracket and the LRD 6199SWS in the proper location on
the windshield of your vehicle, and press the suction cups firmly
against the windshield.
9
Connecting the Power
The LRD6199SWS is designed to operate on most 12 VDC negative
ground vehicle electrical systems. The power cord provided with the unit
has a cigarette lighter socket plug at one end and a small connector at the
other.
1. Insert the small connector into the jack on the side of the unit.
CITY
AUDIO
MUTE
2. Insert the other end into the cigarette lighter socket of your
vehicle.
When installing the power cord, make sure that:
• The socket is clean to allow proper contact.
• The power cord does not block the antenna area on the back of the
unit.
Your unit also comes with ten power cord mounting clips. You can use
these clips to attach the power cord to the window frame or other parts of
the vehicle, keeping it neat and out of the way. Use the double-sided
foam tape squares to attach each clip. Slip the power cord into the clip to
hold it securely in place.
10
Replacing the Fuse
The cigarette lighter plug contains a 1-ampere fuse to protect it from
power surges.
1. To replace the fuse,
unscrew the top of the plug.
2. Remove the fuse and
replace it with the same
type.
3. To replace the top, push in
the two metal contacts and
twist into place.
Note: Your LRD 6199SWS comes with an extra fuse.
11
Operation
You are now ready to enjoy the convenience and security of your
LRD 6199SWS. Please read this section of the Operating Guide carefully
to familiarize yourself with the basic operation of this unit.
Power On
Turn the Volume control to switch on the power. When you power up the
LRD 6199SWS, it performs a self-test of all its circuits. This test takes
about 5 seconds, during which you will hear the different alarm tones and
see all the LEDs. First, you will hear the X-band alarm for 2 seconds
while the X-band indicator, City, and Mute LEDs light. The test also
checks the signal meter LEDs. It is best to adjust the audible alarm during
the self-test. Next you’ll hear the K-band/SWS alarm,
Ka-SuperWideband alarm, and Laser alarm, each for 1 second, while the
corresponding signal indicator LED lights. (The power LED remains on
until you turn off the unit.) The LRD 6199SWS always turns on in Full
Alert Mode.
Note: Any previous selection of City Mode, Audio Alert Only Mode, or
Mute Mode will be reset.
After the LRD 6199SWS confirms proper operation, the alert tones and
all LEDs, except the green Power LED, turn off. If the Power LED does
not light, check the cigarette lighter socket connection. If the unit turns on
and off intermittently, or the alert tone sounds too often for no reason,
check the power cord connection at both ends to be sure it is not loose.
Volume Control
Adjust the Volume control
to a comfortable alarm tone
level for your vehicle. The
volume level does not have
any effect on the unit’s
sensitivity.
Increase
Volume
Off
12
Full Warning
When the LRD 6199SWS detects a radar, laser, or safety warning signal,
it emits a distinct warning tone and the corresponding alert LEDs
(X, K, Ka, L, or SWS) will light and blink. The blink rate of the LEDs
increases and the signal strength meter LEDs light successively as the
signal source comes closer.
Audio Alert Only Operation
Press the AUDIO button for Audio Alert Only operation.
CITY
AUDIO
MUTE
When Audio Alert Only is selected, the visual alert and signal strength
meter are disabled. In this mode, all lighted LEDs will dim. Press the
AUDIO button again for the Full Alert (audio and visual) Mode.
(Do not set the Volume control at minimum when in Audio Alert Only
because there will be no alert.)
Note: The audio alert tones for the 3 radar bands and laser are all
different.
13
Visual Alert Only Operation
You can operate the LRD 6199SWS in Visual Alert Only by setting the
Volume control at the minimum position in Full Alert Mode. At this
setting you can barely hear the audio alert in a quiet environment. Be sure
that the Audio Alert Only indicator is off.
Auto Mute Operation
Press the Mute button to activate the Auto Mute feature.
CITY
AUDIO
MUTE
When the Mute indicator is selected, the unit is in Auto Mute Mode. In
this mode you hear the full audio alert when a signal is first received. The
audio alert automatically reduces to half volume for the duration of the
warning.
14
City Operation
In highly populated areas, you may encounter many devices that use the
same frequencies as radar signals, such as motion detectors, automatic
doors, and intrusion alarms. These devices may trigger an alert called
“falsing.”
To filter most of the weaker signals and get the most accurate radar signal
recognition, press CITY to turn on the City Mode.
CITY
MUTE
AUDIO
The City indicator lights.
In City Mode, the combination of visual and audio alert tones varies
based on the strength of the received signal.
Note: If you use both Audio Only Alert and City modes, you won’t
receive an alert until you are very close to the radar source.
15
LED Signal Strength Meter in City Mode
The LED signal strength meter gives you instant information about the
strength of the signal being detected. A weak signal causes the first LED
to light, but as signal strength increases, more LEDs light. All four LEDs
light when full signal strength is received. Use this meter to judge the
distance from the signal source.
Signal Strength X-, K-, and Ka-Super
WideBand
●❍❍❍ Visual Visual/Audio
●●❍❍ Visual Visual/Audio
●●●❍ Visual/Audio Visual/Audio
●●●● Visual/Audio Visual/Audio
Laser
Safety Warning System Operation
The Safety Warning System (SWS™) is a new communication system
that will provide an early warning when a road hazard exists. The
LRD 6199SWS is capable of detecting the SWS signal broadcast on the
K-band by either law enforcement or local departments of transportation.
The yellow SWS LED blinks and the amber K-band LED lights, while an
audible alert sounds. When this alert sounds, you should tune to local
radio traffic reports or prepare to slow down or stop your vehicle because
you could be approaching an accident, bad road conditions caused by
weather, or road crews or construction.
16
Care and Maintenance
The LRD 6199SWS is designed to give you years of trouble-free service.
There are no user-serviceable parts inside, and, except for the fuse, no
maintenance is required. To keep your detector in new condition, follow
these important suggestions:
• Never leave the LRD 6199SWS on the windshield when you park
your vehicle. The temperature in the vehicle in summer can reach
levels above what is considered to be safe for this unit.
• To make you less susceptible to break-in and theft, remove the unit
from your windshield when you leave your vehicle.
• Do not expose the unit to moisture. Rain, dew, road splash, or other
liquids can damage the internal components and reduce sensitivity of
the LRD 6199SWS.
17
Troubleshooting
If your LRD 6199SWS does not perform up to expectations, try the
suggestions listed below. If you cannot get satisfactory results, call the
Uniden Customer Service Center at (800) 297-1023, 8:00 a.m. to 5:00
p.m. Central Time, Monday through Friday.
Unit does not operate:
(Power LED not on)
Unit fails the self test.
Weak detection.
Inaccurate or erratic
detection:
Beeps over bumps or
rough road.
Beeps at same location.
Signal strength meter
registers, but no audio.
The unit bounces against
the windshield.
Check the power cord. Be sure the connectors
•
are properly installed.
Be sure ignition key is ON or in the accessory
•
position.
Fuse out. Check and replace.
•
Check power to lighter socket.
•
Vehicle electrical problem exists.
•
Make sure that the volume control is in the ON
•
position.
Clean cigarette lighter socket.
•
• Call Uniden Customer Service Center,
(800) 297-1023.
• Check angle of unit. Point to the horizon.
• Antenna/Sensor is obstructed. Relocate the unit
clear of any obstruction outside the windshield,
such as a wiper blade.
•
Relocate the unit clear of the window tint.
•
Loose power cord.
Check both connectors.
•
Power cord is broken. Check and replace.
•
Check that the power cord is connected at both
ends.
•
Clean cigarette lighter socket.
•
Falsing because you have passed a motion
sensor or alarm.
•
For highway use, make sure the City Mode is
OFF.
•
Increase the volume.
•
Reposition so that the bumpers are firmly
against the windshield.
18
Specifications
General
Dimensions: 3
1
in. (W) x 4
9
5
in. (D) x
8
5
in. (H)
6
Weight: 3.5 oz.
Power Requirements: 13.8 VDC
Temperature Range: Operating: -5°F to 160°F (-20°C to 70°C)
Storage: -40°F to 185°F (-40°C to 85°C)
360° Laser Detector
Receiver Type: Pulse Laser Signal Receiver
Sensor Front End: Convex Condenser Lens
Detector Type: Pulse Width Discriminator
Receiver Bandwidth: 30 MHz
Spectral Response: 800 - 1100 nm
Alert Hold Time: 3 seconds
Radar Detector
Receiver Type: Double Conversion Superheterodyne
Self-Contained Antenna
Detector Type: Scanning Frequency Discriminator
Antenna Type: Linear polarized, E vector vertical
Sensitivity: X band = -114 dBm/cm2
K band = -104 dBm/cm2
Ka SuperWideband = -100 dBm/cm2
Frequency of Operation: 10.490 - 10.560 GHz (X band)
24.040 - 24.260 GHz (K band)
33.40 - 36.00 GHz (Ka SuperWideband)
Specifications are subject to change without notice.
19
Optional Accessories & Replacement Parts
Laser/Radar Detector
Operating Guide
Owner’s
Guide
Straight Power Cord
njdfjnjnjfnjfjn
jnkjnjksnkjsnfj
dfksfmkm
njdfjnjnjfnjfjn
kfmkmkmlf
jnkjnjksnkjsnfj
sfkkmmfmsmsm\
dfksfmkm
kkoioionksnkln
kfmkmkmlf
njdfjnjnjfnjfjn
mmkmkkl
sfkkmmfmsmsm\
jnkjnjksnkjsnfj
skdmkmkm
dfksfmkm
kkoioionksnkln
sdmkmfmmmk
njdfjnjnjfnjfjn
kfmkmkmlf
mmkmkkl
jnkjnjksnkjsnfj
mdmklkkkml
sfkkmmfmsmsm\
dfksfmkm
skdmkmkm
kkoioionksnkln
mmkkllmmk
kfmkmkmlf
mmkmkkl
sdmkmfmmmk
sfkkmmfmsmsm\
njdfjnjnjfnjfjn
skdmkmkm
mdmklkkkml
kkoioionksnkln
sdmkmfmmmk
jnkjnjksnkjsnfj
mmkkllmmk
mmkmkkl
mdmklkkkml
dfksfmkm
skdmkmkm
mmkkllmmk
njdfjnjnjfnjfjn
sdmkmfmmmk
kfmkmkmlf
njdfjnjnjfnjfjn
jnkjnjksnkjsnfj
mdmklkkkml
sfkkmmfmsmsm\
jnkjnjksnkjsnfj
mmkkllmmk
dfksfmkm
dfksfmkm
kkoioionksnkln
njdfjnjnjfnjfjn
kfmkmkmlf
kfmkmkmlf
mmkmkkl
jnkjnjksnkjsnfj
sfkkmmfmsmsm\
sfkkmmfmsmsm\
dfksfmkm
skdmkmkm
kkoioionksnkln
kkoioionksnkln
kfmkmkmlf
sdmkmfmmmk
mmkmkkl
sfkkmmfmsmsm\
mmkmkkl
skdmkmkm
mdmklkkkml
kkoioionksnkln
sdmkmfmmmk
skdmkmkm
mmkkllmmk
mmkmkkl
mdmklkkkml
sdmkmfmmmk
skdmkmkm
mmkkllmmk
sdmkmfmmmk
mdmklkkkml
mdmklkkkml
mmkkllmmk
mmkkllmmk
Printed Material
Windshield
Clip
Fuses and
Spare Parts
20
LRD 6199SWS
®
Operating Guide
CITY
AUDIO
MUTE
USZZ01063ZB
Precautions
Important: The LRD 6199SWS was not designed to help you
Federal and Local Regulations
The FCC passed the Communications Act in 1934 to give all citizens the
right to receive any type of radio transmission. The same radio
frequencies used by police radar are also used by other devices, such as
automatic door openers, burglar alarms, and some amateur radio
equipment. Since the LRD 6199SWS is just a radio receiver tuned to a
specific portion of the public radio spectrum, it is protected under this act.
Some local, state, and federal regulations may prohibit the use of this
detection device. Please check with authorities regarding the use of this
device before operating it.
disobey the law. Safe drivers always obey the posted
speed limit and legal driving methods at all times.
Contents
Introduction...............................................1
Feature Highlights ......................................1
Speed Detection Systems ....................................2
Radar ................................................2
Laser ................................................3
Included with Your Radar Detector ............................4
Controls and Functions......................................5
Installation ...............................................8
Helpful Tips...........................................8
Adjusting the Windshield Mounting Clip ....................9
Connecting the Power ..................................10
Replacing the Fuse.....................................11
Operation ...............................................12
Power On............................................12
Volume Control.......................................12
Full Warning .........................................13
Audio Alert Only Operation .............................13
Visual Alert Only Operation .............................14
Auto Mute Operation...................................14
City Operation ........................................15
LED Signal Strength Meter in City Mode...................16
Safety Warning System Operation ........................16
Care and Maintenance .....................................17
Troubleshooting ..........................................18
Specifications ............................................19
Optional Accessories & Replacement Parts .....................20
Features, Specifications, and availability of Optional Accessories are all
subject to change without notice.
Uniden®is a registered trademark of Uniden America Corporation.
One Year Limited Warranty
Important: Evidence of original purchase is required for
warranty service.
WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”)
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail
owner, this Uniden Product to be free from defects in materials and craftsmanship with
only the limitations or exclusions set out below.
WARRANTY DURATION: This warranty to the original user shall terminate and be
of no further effect 12 months after the date of original retail sale. The warranty is
invalid if the Product is (A) damaged or not maintained as reasonable or necessary, (B)
modified, altered, or used as part of any conversion kits, subassemblies, or any configurations not sold by Uniden, (C) improperly installed, (D) serviced or repaired by
someone other than an authorized Uniden service center for a defect or malfunction
covered by this warranty, (E) used in any conjunction with equipment or parts or as
part of any system not manufactured by Uniden, or (F) installed or programmed by
anyone other than as detailed by the Operating Guide for this product.
STATEMENT OF REMEDY: In the event that the product does not conform to this
warranty at any time while this warranty is in effect, warrantor will repair the defect
and return it to you without charge for parts, service, or any other cost (except shipping and handling) incurred by warrantor or its representatives in connection with the
performance of this warranty. THE LIMITED WARRANTY SET FORTH ABOVE IS
THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND
IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY
OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES. Some states do not allow this exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you.
LEGAL REMEDIES: This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state. This warranty is void outside the
United States of America.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after
following the instructions in this Operating Guide you are certain that the Product is
defective, pack the Product carefully (preferably in its original packaging). Include
evidence of original purchase and a note describing the defect that has caused you to
return it. The Product should be shipped freight prepaid by traceable means, or delivered, to warrantor at:
Uniden America Corporation
Parts and Service
4700 Amon Carter Blvd.
Fort Worth, TX 76155
(800) 297-1023, 8:00 a.m. to 5:00 p.m. Central Time, Monday through Friday
Covered under one or more of the following U.S. patents:
®
4,622,553 4,698,632 4,709,407 4,791,420
4,831,498 5,315,302
©1996 Uniden America Corporation. All rights reserved.
Printed in the Philippines
Loading...