Uniden LightCam 35HD, LightCam 40HD Quick Start Manual
LightCam
Caméra projecteur
35HD
Quick Start Guide • Guide de départ rapide
Outdoor CamerasMobile Alerts Stream Video High Definition
Caméras d’extérieurAlertes mobiles Diusion vidéo Haute définition 720p Vision nocturne Détection
HD
720p Definition Night Vision Motion Detection 2 Way Audio
du mouvement
Audio deux voies Réglages
Customizable
Settings
personnalisables
No Monthly Fees
Aucun frais mensuel
Welcome to a new level of home security.
Install LightCam App.
1.
• The app is available on Apple Store and Google Play.
Install and set up your LightCam 35HD.
2.
• Attach power adapter to the camera and plug into power outlet.
• The LED will turn to a solid green then after 10 seconds it will switch o.
• Approximately 15 seconds later, it will begin quickly flashing green
meaning the intialization is complete.
Connect your IPhone to the cameras WiFI connection (Point to Point P2P)
3.
• Press the reset button on the back of the camera.
• When connected, choose from one of the 3 steps.
1) Search Local Network
• Open the LightCam app and click the “+” symbol to add a new camera.
• Click “Search in Local Network”.
• It will automatically search the camera Device ID (DID) and display
the camera
password: 000000 and save the password to complete the connection.
2) Scan QR Code
• Scan the QR Code on the back of the camera to retrieve the
camera name and
• Enter the camera default password: 000000 and save the password.
.
3) Manual Input
name and
Device ID (DID)
Device ID (DID)
.
. Enter the camera default
• Select Manual Input and retrieve the camera
name then input the
on the back of the camera.
• Enter the camera default password: 000000
and save the password.
Device ID (DID)
located
Page 1
Connect your Android Phone to the cameras WiFI connection (Point to Point P2P)
4.
4.
• Press the reset button on the back of the camera
• When connected, choose from one of the 3 steps.
1) Search Local Network
• Open the LightCam app and click the “Add new
camera” symbol to add a new camera
• Click “Search in Local Network”
• It will automatically search the camera Device ID
(DID) and display thecamera
(DID)
. Enter the camera default password:
000000 and save the password to complete
the connection.
2) Scan QR Code
• Scan the QR Code on the back of the
camera to retrieve the camera name and
Device ID (DID)
• Enter the camera default password: 000000
and save the password.
3) Manual Input
• Select Manual Input and retrieve the camera
name then input the
on the back of the camera.
• Enter the camera default password: 000000
and save the password.
.
name and
Device ID (DID)
Device ID
located
Page 2
Loading...