To ensure you get the
most from your
HH955’s features
please read this
operating guide
carefully before using
the unit.
INTRODUCTION
The HH955 is a portable two-way VHF transceiv er. It is
compact, lightweight, and fits easily in the hand. The
hand-held VHF Marine Radio will give you consistent,
outstanding performance in many conditions and
situations.
Uniden does not warranty this radio as watertight nor
waterproof.
Features
Dual Watch Mode
One touch Channel 16
Memory Channel Scan
1 Watt or 5 Watt Transmission
International Channels
Back-lit Display
Key Pad Lock
Uses AA Batteries (either Alkaline or Rechargeable Nickel
Cadmium) (not included).
Belt Clip
Wrist Strap
Technical Support Service
Your local Retailer can provide you with technical
assistance and information. If your marine radio does
not perform properly, please check our website for
frequently asked questions and problem solutions.
Australia - www.uniden.com.au
New Zealand - www.uniden.co.nz
This radio contains no user serviceable parts. Unauthorised
adjustment will void the Warranty and may cause illegal
radio operation. Be sure that a qualified technician services
your radio equipment.
1
Page 3
CONTROLS AND INDICATORS
Controls
1. TNC Antenna Connector
2. Squelch Rotary Switch
3. On/Off and Volume Control
4. Light
5. PTT (Push to Talk)
6. LCD Display
7. Scan
8. Dual Watch
9. MEM
10. Speaker
11. Microphone
12. Channel 16
13. Channel Up
14. 1/5 Watt Transmission
15. Channel Down
16. Keypad Lock
17. Microphone Jack
18. Speaker Jack
19. AC Adaptor Input
Indicators
1. Scan Mode
2. Dual Watch
3. Memory Scan
4. Battery Level Indicator
5. Keypad Lock
6. 5 Watt Transmission
7. Transmit
8. Channel Number
2
Page 4
1 2 3
10
11
MARINE VHF RADIO
SCAN
4
6
DUAL
MEM
5
7
8
9
scan
dual
mem
1 2 3 4 5 6
1/5W
lock
TX
5W
12
16
13
14
15
16
17
18
19
1 8 7
MARINE VHF RADIO
2
SCAN
DUAL
MEM
1 2 3 4 5 6
3 4 5
TX
5W
6
3
Page 5
INCLUDED WITH YOUR HH955
If any of these items are missing from the box, please
contact your Retailer.
MARINE VHF RADIO
SCAN
TX
5W
DUAL
MEM
16
scan
dual
1/5W
lock
mem
1 - Antenna
1 - Radio
1 - Belt Clip
NOTE
Batteries are not included.
Optional Accessories
Speaker Microphone (SM040)
4
1 - Wrist Cord
1 - AC Adaptor
Page 6
GETTING STARTED
Antenna
Make sure the antenna
is firmly seated.
MARINE VHF RADIO
Batteries
Your marine radio may be powered by either - nine AA
rechargable, nickel cadmium batteries - or nine AA alkaline
batteries.
CAUTION
Do not mix NiCad and
Alkaline batteries
To remove the battery
cover (back of HH955),
press on the cover
grip and slide
Ni-Cd
ALK
Ni-Cd
ALK
Set the switch to either Ni-Cd
(nickel cadmium) or ALK
(alkaline) to match the
batteries being used.
Put nine batteries in the
battery compartment.
Check for correct + polarity.
Ni-Cd
Replace the battery
ALK
cover.
When removing batteries from the battery
compartment, tap the radio against your hand to
NOTE
dislodge the batteries and allow them to slide out.
5
Ni-Cd
ALK
Polarity
Page 7
AC Adaptor/Charger
!
Make certain, that if you are using
rechargeable nickel cadmium
batteries in the radio, the switch is
set to Ni-Cd. Refer to ‘Batteries’
page 5.
Insert the AC Adaptor
power cord connector into
the PWR/CHG connection
on the side of the radio.
NOTE
The HH955 uses a 15 VDC AC
adaptor (NOT a 12 VDC as
indicated on the side of the radio).
Plug the other end into an
AC power plug. The
radio’s power must be OFF
to charge the nickel
cadmium batteries.
Charge the batteries according to the manufacturers
instructions.
As soon as the batteries are charged, disconnect from
the power source and radio.
Battery Level Indicator
The battery level indicator will display the current strength
of the battery. If the radio is using a large amount of
power, such as when transmitting, the indicator will drop
and recover when transmitting stops. The battery low
warning tone will sound if there is not enough power to
operate when transmitting. You may be able to continue
by switching to 1 watt transmit power.
Important Points:
1. Do not over-charge - this will shorten the life of
your rechargeable nickel cadmium batteries.
2. Use only the A C Adaptor (AAD955S) that comes
with the HH955.
3. If Ni-Cad batteries are being used the battery level
indicator may not display full, after charging .
Belt Clip
Attach the belt clip with
the screws (included).
6
Page 8
OPERATION
Refer to Controls and Indicators fold-out
drawing on the inside of this guides cover.
When you turn on your HH955, it is tuned to channel
16 the frequency for distress, safety and calling.
Setting the Squelch
NOTE
Before setting the squelch rotary switch on your marine radio,
you must select a channel that is not in use.
Turn the squelch rotary
switch counterclockwise
until you hear noise. Then
turn the squelch rotary
switch back clockwise just
until the noise stops.
Adjust the 4 position
SQUELCH rotary switch
to eliminate background
noise and select the
signals you wish to
receive.
Position 0 (counter clockwise) - squelch off.
Position 1 - (weak signals) squelch threshold
Position 2 - (medium signals) squelch medium
Position 3 - (strong signals) squelch maximum.
squelch
0
volume
2
1
3
Selecting a Channel
To select a channel,
press or .
scan
dual
mem
16
1/5w
lock
One Touch Channel 16
Example: While you are monitoring channel 19, you
want to check channel 16.
MARINE VHF RADIO
Select channel 19.
To monitor channel 16,
press 16 the channel will
change from 19 to 16.
scan
dual
mem
SCAN5 WINT
1/5W
lock
TXWXTRI
16
To return to channel 19,
press 16 again.
Dual Watch
When monitoring a
channel, press dual .
Now the HH955 also
watches for activity on
channels 16 and the
channel selected. DUAL
appears on the display.
MARINE VHF RADIO
scan
dual
mem
SCAN5 W
DUAL
INT
16
1/5W
lock
TXWXTRI
7
Page 9
Memory Channel Scan
Before you can use the memory scan function, you must
enter channels into memory.
Entering Channels into
Memory
Select a channel to enter
into memory, using the up
or down keys.
To enter the channel
into memory, press
mem . MEM appears
in the display.
Removing Channels from Memory
Select a channel that you
want to remove from
memory. (example:
channel 19)
To remove the channel,
press mem again. MEM
disappears from the
display.
MARINE VHF RADIO
16
1/5w
lock
1/5W
lock
TXWXTRI
TXWXTRI
16
SCAN
5 W
INT
MEM
scan
dual
mem
MARINE VHF RADIO
SCAN
5 W
INT
scan
dual
mem
Scanning Channels in Memory
To start scanning
channels in memory,
press scan. When
HH955 receives a
MARINE VHF RADIO
SCAN
SCAN
5 W
DUAL
INT
MEM
TXWXTRI
transmission, SCAN
appears in the display.
scan
dual
mem
16
1/5W
lock
Once you start
scanning Dual Watch
comes on automatically .
To stop Channel
scanning, press scan .
!
While scanning you can press dual to toggle Dual Watch on
and off.
8
Page 10
Transmit
To transmit, press and hold in the PTT (Push To Talk)
key and speak into the microphone.
To receive, release the
PTT key.
MARINE VHF RADIO
SCAN
SCAN5 W
5 WINT
INT
TX
Push
and Hold
16
scan
W
1/5w
dual
lock
mem
Microphone
1 Watt or 5 Watt Transmission
The HH955 comes set to
transmit at 5 watts. To
save battery power, you
can transmit at 1 watt.
To switch between 1 and
5 watts transmission, press
the 1/5W key. The 5W
symbol disappears when
transmitting on 1 watt.
NOTE
If the batteries are ‘Low’ when transmitting on 5 watts; the battery
level indicator will drop to ‘0’ and you will hear a continuous w arning
tone. Recharge the batteries or switch to 1 watt transmitt power.
MARINE VHF RADIO
16
1/5W
lock
TXWX
5W
TRI
scan
dual
mem
SCAN
5 W
INT
Back Light
Press and release the
key - you hear a beep.
The display lights for
about 5 seconds.
If you press any key (on
the front keypad) while
the light is on, the
display light stays on for
another 5 seconds.
Key Lock
Press and hold the lock
key until you hear two
beeps. The keypad is
locked.
If you press any
key on the keypad you
will hear a warning
beep.
To unlock the keypad,
press and hold the lock
key until you hear two
beeps.
Frequency ToleranceTransmit0.001%
Operating Temperature+14 F(-10 C) to + 131 F (+55 C)
AntennaFlexible Whip
MicrophoneBuilt-in Electret Type
Channel DisplayLiquid Crystal Display
Speaker8 1Watt
Power Source9AA Batteries
Size (without antenna)167mm H x 47mm D x 60mm W
Weight (with battery & antenna) 0.47Kg
Transmitter
Frequency Range156.025 ~ 157.425MHz
Frequency Stability 1.5KHz @ -10 to +55 C
Power OutputHigh5 Watts
Spurious Emissions5W-40dBm (Nominal)
Current DrainHigh1.3 Amp (Max.)
1.1 Amp (Nominal)
0.6 Amp (Nominal)
Receiver
Receiver TypeDual conversion super Heterodyne
Frequency Range156.300 ~ 162.025MHz
Sensitivity0.3 V for 20dB SINAD (Nominal)
Squelch SensitivityThreshold 0.4 V (Nominal)
Audio Frequency Response+ 3dB to + 7dB @ 500Hz
Adjacent Channel Selectivity72 dB @ 25 kHz (Nominal)
Hum & Noise Ratio45 dB (Nominal)
Audio Output Power(10% THD) 0.7w (Nominal)
Current DrainSquelched 60 mA (Nominal)
Specifications shown are typical and subject to change without notice.
Receive54
Receive0.001%
Ω
(Alkaline or rechargeable NiCad)
+
-
Low1 Watt
Low0.7 Amp (Max.)
Phase locked Loop system for
Local Oscillator.
µ
µ
- 9dB to - 5dB @ 200Hz
+
-
Audio0.3 w output
140 mA (Nominal)
Max. output
210mA (Nominal)
11
Page 13
WARRANTY
ELEMENT OF WARRANTY: Uniden warrants the original
retail owner for the duration of the Warranty, its HH955 (herein
after referred to as the Product) to be free from defects in materials
and craftsmanship with only the limitations or exclusions set
out below.
WARRANTY DURATION: This Warranty, to the original
retail owner only, shall terminate and be of no further effect 12
months after the date of original retail sale. This Warranty will
be deemed invalid if the Product is; (A) Damaged or not
maintained as reasonable and necessary, (B) Modified, altered
or used as part of any conversion kits, sub-assemblies, or any
configurations not sold by Uniden, (C) Improperly installed,
(D) Repaired by someone other than an authiorised Uniden
Repair Agent for a defect or malfunction covered by this
Warranty, (E) Used in conjunction with any equipment or parts
or as part of a system not manufactured by Uniden. (F) Only
available in the original country of sale.
PARTS CO VERED: This Warranty cov ers for one (1) y ear, the
HH955 Unit only. All accessories (AC adaptor, Cables etc.) are
covered for 90 days only
STATEMENT OF REMEDY: In the event that the product
does not conform to this Warranty at any time while the W arranty
is in effect, the warrantor at its discretion will repair the defect
or replace the Product and return it to you without charge for
parts or service.
THIS WARRANTY DOES NOT CO VER OR PR OVIDE FOR
THE REIMBURSEMENT OR P AYMENT OF INCIDENT AL
OR CONSEQUENTIAL DAMAGES. THIS GUARANTEE
IS IN ADDITION TO AND DOES NOT IN ANY WAY
AFFECT YOUR RIGHTS UNDER THE CONSUMER
GUARANTEE ACT.
PROCEDURE FOR OBTAINING PERFORMANCE OR
WARRANTY: In the event that the Product does not conform
to this Warranty, the Product should be shipped or delivered,
freight prepaid, with evidence of original purchase (eg. a copy
of the sales docket), to the warrantor at: