Umax DMX-3191D WINXP INSTALLATION

OPERATIONAL GUIDE

Installing the DMX-3191D SCSI card

1. Power down the host computer and all peripherals.

2. Remove the Cover of the Host Computer.

3. Insert the DMX03191d SCSI card.

4. Close the Cover.

5. Go to next section for driver installing.

WINXP Driver installation

Once the card is installed and the computer is restarted, Windows will
detect the board and attempt to load the drivers for it.

Step (1)
Windows will detect a “SCSI Controller”.
Select “Install from a list or specific location.” Click “Next.”

Step (2):
Select”Include this location in the search ”.Click on the”Browse” button.
Navigate to the folder that contains the dmx-3191d drivers.

1

Step (3):
Click on the “Continue Anyway ” button.

Step (4):
Please insert the floppy disk labeled “DMX3191 Drivers Disk “into drive A:
And then click OK

Step (5):
Click on the “Browse” button.
Navigate to the folder that contains the dmx-3191d drivers.
Click “Next” .

2