Install BT_SAMBA
The Player is a system, it consist of operating system (Linux+AP) and application software
(BT_SAMBA).
The operating system install in the internal flash; and application software will install on HDD of
Net Media Player.
Ready for installation
Please save the relatively of BT_SAMBA files in USB Device, and insert the USB device in the
Net Media Player first. The files are:
btpd_0.0.1_mipsel.ipk
samba_3.0.23c_mipsel.ipk
unicgi_0.0.1_mipsel.ipk
HDD FORMAT
If you want to use install BT/Samba application, you must use Player’s format tool to format
your HDD disk.
When you insert a Hard disc on the system at the first time, you can press
into Setup
menu and select HDD Format to Format HDD.
When Format completed, the box need to do restart, then begin to install BT/Samba.
Attention:
1) All data on HDD will be lost after format, So , pls. must backup your data firstly.
2) Don’t connect the two HDD into the box, otherwise, you may select the wrong way
to format to cause the data lost.
Install BT/Samba Extension
Put the following install file into your USB disk,
btpd_0.0.1_mipsel.ipk
samba_3.0.23c_mipsel.ipk
unicgi_0.0.1_mipsel.ipk
font-intl_0.0.1_mipsel.ipk
Plug in the USB disk into player’s USB host port, and then navigate to setup
page--system---system upgrade---Extension Package Upgrade, Press OK to start the install
Bt/Samba, which will install these one by one:
Btpd
Samba
Unicgi
Note:
If you find the install is fail,Please check:
i) If USB device insert the Player and if the install file is correct in the USB device.
ii)The player was shut down during install
Chapter 9
Neighbor Web Interface
Input the IP address into Neighbor web interface by IE browser.
At Home page, the “Neighbor web” will display Player’s status and storage
device.
Bit Torrent Download
At Home page, Select “BitTorrent Download” into download interface.
Add new torrent
Select
into add new torrent file page.
At “add new torrent” page, click “Browser”button to choose torrent file path
from local PC.
When you select a torrent file, press “Open” button to add.