Ultimate Sound TS-1000 Owners manual

Titanium II Symetec

2

Subwoofers

S10

TS1200

TS1000

Installation and Operation Guide

Ultimate Sound, Inc Ultimate Europe AB
138 University Parkway Flojelbergsgatan 7A
Pomona, California SE 431 37
Phone: [phone] Molndal, Sweden
Fax: [phone] Phone: [phone]
e-mail Fax: [phone]

[e-mail] europeansupport@ultimate-

europe.com

I. Introduction

You have purchased a very sophisticated subwoofer manufactured by
Ultimate Sound. Founded in 1975, Ultimate Sound makes speakers
for every car audio application, speakers for marine environments,
enclosed speaker systems, amplifiers, accessories and other products. Our
tradition of leadership and innovation in the audio industry continues with
innovative products like Titanium II Symetec Subwoofers.

We recommend you have your new
installed by a professional. Professional installation shops have the
equipment to do the job correctly, and the experience to recommend the
best mounting locations in your vehicle.

Please use your new Titanium II Symetec Subwoofers responsibly.
Very loud music can cause permanent hearing loss.

TITANIUM II SYMETEC SUBWOOFER FEATURES:

• SYMETEC symmetrical geometric cone design increases the

stiffness of the cone for less harmonic distortion at high power.

• Titanium II cone formula- for strength, durability and stability

during high power operation at extreme temperatures.

• The Butyl Rubber Surround has superior damping characteristics

and will last longer than foam surrounds

• Kapton Voice Coil Former- Higher power handling than

aluminum voice coil formers.

• 4 Layer voice coil windings keep more wire in the magnetic gap for

more output..

• Vented, extended pole piece- keeps the voice coil cool during long

excursions at high power.

• Bumped back plate- makes sure the voice coil never bottoms out.

Titanium II Symetec Subwoofers

II. Package Contents

• 1

Titanium II Symetec Subwoofer

• Instruction manual and warranty card.

III. Specifications

Ultimate Sound

3

Model TS1200 TS1000

4

Height

Size 12"/305mm 10"/254mm

Impedance

Frequency

4Ω 4Ω

24Hz-500Hz 27Hz-800Hz
Response
Voice Coil 2”/ 50.8mm 1.5”/ 38mm

Magnet 55 oz. 40 oz.

Fs 29Hz 32Hz
Vas- ft3/Liter 2.4ft3/ 68 Liters 1.38ft3/ 39 Liters

Xmax 0.3”/7mm 0.3”/7mm

Qts .37 .40
Sensitivity 91.7dB 90.5dB
Power- RMS 250 Watts 200 Watts

Power- MAX 500 Watts 400 Watts

Cone

Titanium II Symetec Titanium II Symetec
Surround Butyl Butyl

Frame Steel Steel
Mounting

5.2" 4.5"
Depth(In.)
Mounting

130mm 114.3mm

Depth(mm)

IV. Installation- Sealed Enclosures

1. Sealed enclosures provide excellent performance with Titanium II
Symetec Subwoofers. They are the simplest enclosures to design and

build. We recommend you choose a sealed design if you have not
built subwoofer enclosures before. Remember to glue and screw all
joints, using enough glue to make sure all joints are air tight. Loosely
fill the enclosure with fiberglass, poly-fill, or cotton damping material.

TS1200
Optimum 0.82ft3/23.2L 0.14ft3/4.08L 0.96ft3/27.28L
Minimum

TS1000
Optimum
Minimum 0.3ft3/8.5L 0.08ft3/2.27L 0.38ft3/10.77L

Internal Volume(ft3)= (in Inches)Internal Width X Depth X Height
1728
Internal Volume(L)= (in Centimeters)Internal Width X Depth X Height
1000

Recommended Sealed Enclosures

Recommended

Internal Volume

Driver

Displacement

Total Internal

Volume

0.35ft3/9.9L 0.14ft3/4.08L 0.49ft3/13.98L

0.65ft3/18.4L 0.08ft3/2.27L 0.73ft3/20.67L

Width

Ultmate

Depth

Ultimate Sound

Ultimate Sound