U-Line U-1115RB-00, U-1175RB-00, U-1175RB-02, U-1175RW-00, U-1175RW-02 Insert Panels

®

INSERT PANEL GUIDE

Door & Drawer Insert Panel Guide

Refrigerators

U-1115RB-00

U-1175RB-00

U-1175RB-02

U-1175RW-00

U-1175RW-02

U-2115RB-00

U-2115RW-00

U-2175RCB-00

Combo® Models

U-2175RFB-00

U-2175RFW-00

U-C2275DWROL-00

U-CLRCO2175B-00

U-CLRCO2175B-40

U-CO1175B-00

U-CO1175B-20

U-CO2175FB-00

Ice Makers

U-ADA15IMB-00

U-BI2115B-00

U-B12115B-20

U-B12115W-00

U-B12115W-20

U-CLR2160B-00

U-CLR2160B-40

U-CLR2160W-00

Freezers

ULN-75FB-00

ULN-75FWH-00

U-2175RCB-02

U-2175RCW-00

U-2175RCW-02

U-2275DWRCOL-00

U-2275DWRCOL-02

U-ADA24RB-13

ULN-29RB-00

ULN-29RB-02

ULN-29RB-06

ULN-29RB-09

ULN-29RWH-00

ULN-29RWH-02

ULN-29RWH-06

ULN-29RWH-09

U-CO2175FW-00

U-CO29B-00

U-CO29B-03

U-CO29B-20

U-CO29FB-00

U-CO29FWH-00

U-CLR2160W-40

ULN-BI95B-00

ULN-BI95B-20

ULN-BI95BTP-00

ULN-BI95BTP-20

ULN-BI95WH-00

ULN-BI95WH-20

ULN-SP18B-03

ULN-SP18B-20

ULN-SS98-03

ULN-SS98-20

The American Built-In Undercounter Leader Since 1962

U-LINE.COM

DANGER

!

WARNING

!

CAUTION

!

NOTICE

Safety Precautions

Panel Dimensions

The insert panel must not weigh more than 20 lbs.

Safety Alert Definitions

Throughout this guide are safety items labeled with a Danger,
Warning or Caution based on the risk type:

Danger means that failure to follow this safety statement will
result in severe personal injury or death.

Warning means that failure to follow this safety
statement could result in serious personal injury or
death.

Caution means that failure to follow this safety statement
may result in minor or moderate personal injury, property
or equipment damage.

Insert Panel Installation

Custom 1/4'' Thick Door/Drawer Panel
Insert

Insert Panel Preparation

A custom insert panel may be inserted into the door / drawer
frame. Custom insert panels can be flat or raised, as long as the
maximum panel thickness, where inserted into the door / drawer
reveal (channel), is no more than 1/4" thick. For raised panels, the
depth of the reveal is 1/4" on all four sides.

Model Width Height

1115R 13-15/16" 26-15/16"

1175R 22-15/16" 26-15/16"

2115R / BI2115 14-1/32" 27-11/16"

2175RC / 2175RF 23-1/32" 27-11/16"

*2275DWRC / *C2275DWR 23-1/32" 12-15/32"

29R / CO29 / CO29F 19-13/16" 21-13/32"

75F 22-15/16" 26-15/16"

ADA15IM 13-15/16" 26-15/16"

ADA24R 22-15/16" 26-15/16"

BI95 / BI95BTP / SP18 12-15/16" 13-15/32"

BI98 / SS98 13-15/16" 15-15/16"

CLR2160 14-1/32" 27-11/16"

CLRCO2175 / CO2175F 23-1/32" 27-11/16"

CO1175 22-15/16" 26-15/16"

* The overlay model is used to create a black model which can be used

with 1/4" insert panels (with the necessary purchase of two handle kits).

Insert Panel Installation

Door Models

1a. Remove top hinge screw pin with

Phillips head screwdriver. Remove
door by tilting forward and lifting off
bottom hinge pin.

Drawer Models

1b. Drawer model inserts can be installed without removing the

drawer from the unit. Simply pull the drawer open and follow
instructions.

Custom raised panels will reduce the door’s 90° swing if
the unit is installed next to a wall or similar type of
structure.

2. Pull door / drawer gasket out of groove
(top edge of door / drawer only). Start in
the middle and pull outward, moving
toward the edge. This may take some
force.

3. Remove the two outside screws, one on
each side, holding door / drawer handle.
Slightly separate handle from door /
drawer.

4. Pull handle up and off.

u-line.com 1

CAUTION

!

Use care when handling the insert. Insert edges may be

NOTICE

sharp.

5. Slide custom door / drawer panel insert into 1/4-inch channel in
door / drawer front.

Use care not to damage magnet, located on door bottom,
when installing door insert. Do not set door on bottom
edge when pushing insert into place.

6. Holding door / drawer gasket out of the way, replace handle on
door / drawer. Make sure it is seated properly on insert and that
screw holes line up.

Step 3

7. Install two small screws removed in

8. Starting at the corners and working inward, push door / drawer
gasket into place on door / drawer.

Door Models Only

9. Place door on bottom hinge pin and install upper hinge screw.

.

2 u-line.com

®

INSERT PANEL GUIDE

PRODUCT INFORMATION

Complete Installation Guides, Use and Care Guides, Specifications & Features and Benefits, CAD Drawings,
Overlay Panel/Frame and Toe-Kick Specifications and Instructions, Compliance Documentation and Applicable
Energy Guides are available for reference and download at u-line.com.

SERVICE INFORMATION

Please consult your Use and Care Guide for troubleshooting information. Answers to Customer Frequently Asked
Questions are available at u-line.com under Customer Service. You may contact U-Line directly:

GENERAL INQUIRIES:

U-Line Corporation

P.O. Box 245040

Milwaukee, Wisconsin 53224-9540 U.S.A.

Phone [phone]

FAX [phone]

Email: [e-mail]

u-line.com

SERVICE ASSISTANCE:

Phone [phone]

FAX [phone]

Email: [e-mail]

u-lineservice.com

PARTS ASSISTANCE:

E-mail: [e-mail]

BUILDING ON THREE GENERATIONS OF INNOVATION

For over five decades and through three generations, U-Line continues to be the leader in innovation, quality and
performance in the premium built-in undercounter ice making, refrigeration and wine preservation market. U-Line
has captivated those with an appreciation for the finer things with exceptional functionality, style, inspired
innovation and attention to even the smallest details. We are known and respected for our unwavering dedication
to product design, quality and selection.

In 1962, Henry Uihlein founded U-Line Corporation as an outgrowth of Ben-Hur Freezer Company and was the first
to develop and patent an automatic stand-alone undercounter residential ice maker. His foresight and determination
to develop new ideas and to succeed when there were no clear guidelines or solutions are evident today. The newest
Uihlein generation continues to build upon the family’s innovative legacy at the Milwaukee, Wisconsin based business
by providing continuity and vision from which new designs and technology continue to be born.

Today the complete U-Line product collection includes Ice Makers, Ice Machines, Wine Captain® Models, Combo®
Models, Refrigerator / Freezers, Refrigerators, Drawer Models and Beverage Centers. The U-Line brand offers
products in the 1000 Series, 2000 Series and the Modular 3000 Series. The 1000 Series offers a more targeted
priced product with appropriate features, while the 2000 Series offers upscale features, advanced technology and
specialized product families. Our Modular 3000 Series provides sleek design and versatile temperature settings with
our U-Select® control. U-Line’s approach to its breadth of products, multiple price points and features allows a
choice and product that will fit any lifestyle.

DESIGNED, ENGINEERED AND ASSEMBLED IN WISCONSIN, USA

The American Built-In Undercounter Leader Since 1962

U-LINE.COM

Publication Number 30304 4/2013 Rev.F

©2013 U-Line Corporation