
INSTALLATION GUIDE
2000 SERIES
Model Selection (Program Board)
VISIT U-LINE.COM FOR THE MOST UP-TO-DATE INSTRUCTIONS AND LITERATURE
The American Built-In Undercounter Leader Since 1962
U-LINE.COM

Ta b l e o f C o n t en t s
1 - Safety Precautions
Safety Alert Definitions.........................................................................................................................................1
2 - Program a Board
Program Procedure ...............................................................................................................................................2

1 Safety Precautions
Safety Alert Definitions
Throughout this guide are safety items labeled with a Danger,
Warning or Caution based on the risk type:
Danger means that failure to follow this safety statement will
result in severe personal injury or death.
Warning means that failure to follow this safety
statement could result in serious personal injury or
death.
Caution means that failure to follow this safety statement
may result in minor or moderate personal injury, property
or equipment damage.
u-line.com 1

2 Program a Board
7. Press and release light key.
8. Wait for display to stop flashing.
9. Remove jumper from board.
Grounding precautions need to be taken whenever
touching a bare circuit board. Attach an anti-static wrist
strap to reliable ground and wear it whenever handling
the circuit board. Also, handle boards carefully and avoid
touching components.
Program Procedure
1. Unplug unit and install new board.
2. Plug in unit.
3. The display may show SP or --, either is OK.
4. Install a jumper on J3.
On drawer models, both bottom and top drawers must be
open to program the board.
5. Hold down warmer, colder and light button until display shows
model number and main board beeps.
6. Use warmer / colder to select new model number.
Model Selection Chart
Model 120
2175R / 2175RC 61 75 68104-S
2175WC / 2175WCC 62 76 68104-S
2175EBEV / 2175BEVC 63 77 68104-S
CO2175FF / CO2175F 64 78 68104-S
2175RF 65 79 68104-S
*CO2175DWR / C2275DWR 66 80 68104-S
CLR2160 67 81 68104-S
CLRCO2175 68 82 68104-S
*2175DWRR / 2275DWRR
2275DWRC
2115R 71 73 68104-S
2115WC 72 74 68104-S
*2275DWRWC 85 86 68084-S
2275ZWC (Dual Control) 85 86 68084-S
2275ZWC (Single Control) 87 88 68084-S
Volts
70 84 68104-S
220
Vo lt s
Board Part #^
10. Unplug unit and wait 5 seconds.
11. Plug unit back in.
Wait for the beep and the display to show the set point.
* Bottom and top drawer must be open to program the board.
^Board Part # 68072-S has been replaced by 68104-S.
2 u-line.com

INSTALLATION GUIDE
PRODUCT INFORMATION
Complete Installation Guides, Use and Care Guides, Specifications & Features and Benefits, CAD Drawings,
Overlay Panel/Frame and Toe-Kick Specifications and Instructions, Compliance Documentation and Applicable
Energy Guides are available for reference and download at u-line.com.
SERVICE INFORMATION
Please consult your Use and Care Guide for troubleshooting information. Answers to Customer Frequently Asked
Questions are available at u-line.com under Customer Service. You may contact U-Line directly:
GENERAL INQUIRIES:
U-Line Corporation
P.O. Box 245040
Milwaukee, Wisconsin 53224-9540 U.S.A.
Phone 1-414-354-0300
FAX 1-414-354-7905
Email: sales@u-line.com
u-line.com
SERVICE ASSISTANCE:
Phone 1-800-779-2547
FAX 1-414-354-5696
Email: onlineservice@u-line.com
u-lineservice.com
PARTS ASSISTANCE:
E-mail: onlineparts@u-line.com
BUILDING ON THREE GENERATIONS OF INNOVATION
For over five decades and through three generations, U-Line continues to be the leader in innovation, quality and
performance in the premium built-in undercounter ice making, refrigeration and wine preservation market. U-Line
has captivated those with an appreciation for the finer things with exceptional functionality, style, inspired
innovation and attention to even the smallest details. We are known and respected for our unwavering dedication
to product design, quality and selection.
In 1962, Henry Uihlein founded U-Line Corporation as an outgrowth of Ben-Hur Freezer Company and was the first
to develop and patent an automatic stand-alone undercounter residential ice maker. His foresight and determination
to develop new ideas and to succeed when there were no clear guidelines or solutions are evident today. The newest
Uihlein generation continues to build upon the family’s innovative legacy at the Milwaukee, Wisconsin based business
by providing continuity and vision from which new designs and technology continue to be born.
Today the complete U-Line product collection includes Ice Makers, Ice Machines, Wine Captain® Models, Combo®
Models, Refrigerator / Freezers, Refrigerators, Drawer Models and Beverage Centers. The U-Line brand offers
products in the 1000 Series, 2000 Series and the Modular 3000 Series. The 1000 Series offers a more targeted
priced product with appropriate features, while the 2000 Series offers upscale features, advanced technology and
specialized product families. Our Modular 3000 Series provides sleek design and versatile temperature settings with
our U-Select® control. U-Line’s approach to its breadth of products, multiple price points and features allows a
choice and product that will fit any lifestyle.
DESIGNED, ENGINEERED AND ASSEMBLED IN WISCONSIN, USA
The American Built-In Undercounter Leader Since 1962
U-LINE.COM
Publication Number 30166 6/2013 Rev.L
©2013 U-Line Corporation