Uline ORIGINS CO1175 User Manual

Installation Guide

CO1175 —
Ice Maker/Refrigerator

www.U-LineService.com

Phone [phone] • FAX [phone]

Service & Parts Tech Lines Phone [phone] • FAX [phone]

[e-mail]

©2006 U-Line Corporation

11/2006

CO1175 — Ice Maker/Refrigerator

Contents

Exterior Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Cut-Out Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Product Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Door Swing/Clearances Information . . . . . . . . . . . . . . 5

Reversing the Door. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Other Site Requirements . . . . . . . . . . . . . . . . . . . . . . . . 6

Side-By-Side Installation Instructions . . . . . . . . . . . . . . 7

Custom 1/4'' Thick Door Panel Insert . . . . . . . . . . . . . . 8

Checking Door Alignment . . . . . . . . . . . . . . . . . . . . . . 9

Adjusting Door Alignment . . . . . . . . . . . . . . . . . . . . . . 9

Water Supply Connection . . . . . . . . . . . . . . . . . . . . . . . 9

Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 10

Leveling Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Installation Tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Installation of the CO75A . . . . . . . . . . . . . . . . . . . . . . . 11

Grille Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Glass Shelf Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Installation Troubleshooting . . . . . . . . . . . . . . . . . . . . . 12

Initial Start-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Start-Up Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 13

Service Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

1 Follow Safety Precautions

IMPORTANT

PLEASE READ all instructions completely before
attempting to install or operate the unit.

• This unit requires connection to the water supply.
Improper hook-up can result in substantial property
damage! If you are unsure of your ability to safely
connect the water supply to the unit, consult a licensed
plumber for assistance.

• This unit requires connection to a grounded (three­prong), polarized receptacle that has been placed by a
qualified electrician in accordance with applicable
electrical codes.

Safety Alert Definitions

Safety items throughout this guide are labeled with a
Danger, Warning or Caution based on the risk type:

DANGER

Danger means that failure to follow this safety
statement will result in severe personal injury or
death.

WARNING

Warning means that failure to follow this safety
statement could result in serious personal injury,
or death.

CAUTION

Caution means that failure to follow this safety statement
may result in minor or moderate personal injury, property
or equipment damage.

www.U-LineService.com 2 11/2006

CO1175 — Ice Maker/Refrigerator

General Precautions

Use this appliance for its intended purpose only and
follow these general precautions along with those listed
throughout this guide:

WARNING

SHOCK HAZARD — Electrical Grounding Required.

• Keep the unit unplugged throughout installation
except during testing.

• Never remove the round grounding prong from
the plug and never use a two-prong grounding
adapter.

• Never use an extension cord to connect power to
the unit.

• Always keep your working area dry.

CAUTION

• Use care when moving and handling the unit. Use
gloves to prevent personal injury from sharp edges.

• Do not lift the unit by the door or door handle.

• Do not install the unit behind closed doors or in any
way that would obstruct airflow to the front grille,
which may cause the unit to malfunction.

2 Inspect and Plan

You have received a carton containing your CO1175 Ice
Maker/Refrigerator with a package inside containing a
User Manual, a Product Registration Card and water
connection parts. Complete and mail the Product
Registration Card or register online at
www.U-LineService.com. Once your unit is installed, keep
the User Manual and this Installation Guide in a safe place
for future reference.

CO1175 units are available in Black or Stainless. Black
units have a vinyl-clad cabinet with matching door.
Stainless models have a stainless steel door, and a black
cabinet. All Black CO1175 unit doors have a slightly
contoured handle across the top and are reversible. These
doors have recessed front panels that will accept a custom
1/4 inch thick door panel. Stainless unit doors are covered
with a protective coating and have beed ordered left-or
right-hand hinged. The Stainless doors are not reversable
and do not accept custom panels. All CO1175 units have
tempered glass shelves.

Please carefully follow the directions that apply to your
unit and your intended design.

Tools/Materials Required

• Screwdrivers — slotted and Phillips head

• 1/4-inch OD copper tubing and shutoff valve for water
supply line

• 1/4-inch thick door panel material and cutting tools

Inspection

Unwrap and inspect the unit on a flat, level surface
capable of supporting its entire weight.

11/2006 3 www.U-LineService.com

CO1175 — Ice Maker/Refrigerator

Exterior Cleaning

(As Required)

Black Models:

• Black surfaces may be cleaned with a mild detergent
and warm water solution. Do not use solvent-based or
abrasive cleaners. Use a soft sponge and rinse with
clean water. Wipe with a soft, clean towel to prevent
water spotting.

Stainless Models:

• Stainless door panels and handles can discolor when
exposed to chlorine gas, pool chemicals, salt water or
cleaners with bleach.

• Keep your Stainless unit looking new by cleaning with
a good quality all-in-one stainless steel cleaner/polish
on a monthly basis. For best results use Claire Stainless
Steel Polish and Cleaner, which can be purchased from
U-Line Corporation. (The part number is 173348.)
Comparable products are acceptable. Frequent
cleaning will remove surface contamination that could
lead to rust. Some installations may require cleaning
on a weekly basis.

• Do not clean with steel wool pads.

• Do not use cleaners that are not specifically
intended for stainless steel on stainless surfaces
(this includes glass, tile and counter cleaners).

• If any surface discolors or rusting appears, clean it
quickly with Bon-Ami or Barkeepers Friend Cleanser
and a non-abrasive cloth. Always clean in the direction
of the grain. Always finish this process with Claire
Stainless Steel Polish and Cleaner or comparable
product to prevent further problems.

• Use of abrasive pads such as Scotchbrite will
cause the graining in the stainless to become
blurred.

• Rust that is allowed to linger can penetrate into the
surface of the stainless steel and complete removal of
the rust may not be possible.

3 Prepare Site

Your U-Line product has been designed for either free­standing or built-in installation. When built-in, your unit
does not require additional air space for top, sides or rear.
However, the front grille must NOT be obstructed and
clearance is required for water and electrical connections
in the rear.

Note: Unit can NOT be installed behind a closed cabinet
door.

Cut-Out Dimensions

See Electrical

Specifications

34-1/4"

to

35-1/8"

8"

for Power Supply

24-3/16"

Figure 1

Follow the cut-out drawing in Figure 1. The 24-3/16"
width allows 1/4" for ease in installation and removal of
the unit. 24" is the counter depth in most installations.
The unit is 24" deep including the door and not the
handle on Stainless models and 24" deep including the
handle on Black models (see Figure 2).

24"

Minimum

www.U-LineService.com 4 11/2006