Uline ORIGINS 75F User Manual

ORIGINS

¼” CUSTOM PANEL SIZES

BI·95

BI·98

75 Series

75 Stainless Series

29 Series

15 Series

15 Stainless Series

13 15/32” H x 12 15/16” H

15 15/16” x 13 15/16” W

28 5/32” H x 22 15/16” W

29 13/32” H x 22 15/16” W

21 13/32” H x 19 13/16” W

28 5/32” H x 13 15/16” W

29 13/32” H x 13 15/16” W

Zero clearance on black and white models with a flush/flat
door panel.

Door will accept a raised panel. Allow proper clearance, on
hinge side when installing a raised panel. Amount of clearance
will depend on raised panel thickness.

The maximum panel thickness when inserted into the door reveal
(channel) is ¼” thick.

For raised panels, on black and white models, the depth of the
reveal is ¼” on both sides and bottom and ½” on top.

For raised panels, on stainless steel models, the depth of the
reveal is ¼” on both sides, top and bottom.

Allow 9/16” clearance on hinge side for all stainless steel models
with flush/flat panel. Additional clearance maybe needed, on hinge
side when installing a raised panel. Amount of clearance will depend
on raised panel thickness.

Panel not to exceed 20 pounds.

Conversion information: 1 inch = 2.54 cm