Uline H-1114, H-1115, H-1116, H-1117 User Manual

H -1116, H -1117

INDUSTRIAL COUNTING SCALE

BEFORE USING THE COUNTING SCALE

H -1114, H -1115

1-800-295-5510

uline.com

Para Español, vea páginas 11-21.

Pour le français, consulter le pages 21-31.

QTY

7SMPL

PST

WEIGHT

CHARGING

lb/1000

UNIT WEIGHT

STABLE

QUANTITY

1-800-295-5510

Pcs

UNIT

PST

SMPL

TOTAL

ZERO

TOTAL

TARE

For best performance, the scale should be located in a cool, dry place that is free from excessive air currents, corrosives, vibration and temperature or humidity extremes.

WARNING! DO NOT place the scale:

• Next to open windows or doors.

• Near air-conditioning or heating vents.

• Near vibrating, rotating or reciprocating equipment.

• Near magnetic fields or equipment generating magnetic fields.

• On an unstable work surface.

• In dusty locations.

• In direct sunlight.

PREPARING TO USE THE SCALE

1. Put the scale on a firm, level surface to obtain accurate weight readings.

2. Adjust the four leveling feet so scale platform is level.

3. Avoid placing scale in direct sunlight or near the ventilating system exhaust port.

4. Before turning scale on, remove any weight on the scale platform.

5. Once scale is turned on, it goes through an LCD test and re-zeros.

6. Please allow scale to warm up 15-20 minutes before use.

7. When appears on screen, scale needs recharging.

8. Place items being weighed in center of the platform for accurate weighing. Overall dimensions of the item should not exceed the platform dimensions.

RECHARGEABLE BATTERY

Scale operates up to 120 hours on a fully charged battery. Recharge the battery when the appears or every three months when the scale is not being used for long periods of time.

ACTIVATE SCALE

LEVEL THE SCALE

• Place the scale on a flat, level surface.

• Using the leveling bubble on the left front panel, adjust the legs under scale until bubble is centered.

PAGE 1 OF 30 0321 I H -1114

TURN SCALE ON

• Nothing should be on the scale.

• Press ON/OFF located under the left side of the scale.

• Scale counts down to zero and displays the version on the WEIGHT display.

• Allow scale to warm up for 15 to 20 minutes before use.

→ 0←

0.0.0.0.0.

NETNET

WEIGHT

M+

STABLE

SMPL

0.0.0.0.0.

0.0.0.0.0.0.

QUANTITY

DIGITAL DISPLAYS

UNIT WEIGHT

Pcs

UNIT WEIGHT

Weight of each of the objects placed on the weighing pan or the number of weighings totaled.

QUANTITY

Number of objects (count) on the weighing platform or the total number of objects being totaled.

INDICATORS

1. "

" – Indicator shows what is being displayed: →0←,

NET, SMPL WT, PC WT, M+, STABLE.

2. kg – displays weight in kilograms.

WEIGHT

Weight of all the objects placed on the weighing

platform or the totalized weight.

KEYPAD

1. 0-9 – Numeric keys set numeric data for tare weight, sample number and sample weight.

2. SAMPLE – Used to set the quantity and weight of the items being counted.

3. QTY PRESET – Preset the quantity limits.

4. UNIT WEIGHT – Preset the high weight limits.

5. UNIT WEIGHT PRESET – Store up to 10 different piece weights. Also set scale to read in kg or lb.

6. ZERO – Re-zeros the weight. Also used to set functions.

7. M+ – Accumulation key adds the display value into memory.

8. . – Sets decimal point position. Also a confirm or enter key to complete some functions.

9 . CE – Clears or deletes existing accumulated values.

3. lb – displays weight in pounds.

Some keys on the keypad serve dual functions.

Increases sampling speed

– "Low Battery" indicator. Battery needs

recharging.

Decreases sampling speed

7 8 9

ABC DEF

4 5 6

JKLGHI MNO

1 2 3

TUVPQRS WXYZ

•

CE TARETARE MC

SAMPLE

UNIT

WEIGHT

ZERO M+

QTY

PRESET

UNIT

WEIGHT

PRESET

Also sets

kg or lb.

10. TARE – Deducts container weight from pieces weight.

11. MC – Clears accumulated total from memory.

PAGE 2 OF 30 0321 I H -1114

Also a "confirm" or "enter" key for some functions.

Also sets most function modes.

SETTING FUNCTION MODES

SETTING "LBS" OR "KG"

1. For lb., press UNIT WEIGHT PRESET, then 1.

2. For kg., press UNIT WEIGHT PRESET, then 2.

3. Scale displays weight in "kg" or "lb" until you change it.

NOTE: If UNIT WEIGHT PRESET is set to select unit weight as a secondary function, hold key for about 3 seconds.

ZERO DISPLAY MASK (BACK ZERO MODE)

Auto zero tracking (default) ensures that the "0" remains stable despite changes in temperature or power. In drafty and other unstable conditions, the Zero Display Mask is useful. You can set the scale to not show the first division of weight. It will show "0," as long as the weight is

less than two display divisions.

0 = Normal Mode (1st Division displayed)

1 = Zero Display Mask (1st Division displayed as 0)

1. Press ZERO, then 8.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

SMPL

PC WT

STABLE

M+

Pcs

1. Press ZERO, then 8.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

SMPL

PC WT

M+

STABLE

2. Press 8 to increase or 2 to decrease the sampling speed.

3. Press QTY PRESET to exit and save the settings.

PRESET TARE

You can set the preset tare (used to enter the weight of a container when its weight is known) one of two ways:

0 = Preset tare function is not available when an object is on the scale.

1 = Preset tare function is available when an

object is on the scale.

1. Press ZERO, then 1, 2.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

USEr PttYP

SMPL

M+

STABLE

Pcs

2. Press 4 to select 0, or 6 to select 1.

3. Press QTY PRESET to exit and save the settings.

DISPLAY BACKLIGHT

Turn Backlight On:

Press ZERO, then 5. Backlight turns on automatically when any key is pressed or the weight is over 10 divisions. When weight is removed, backlight switches off after 5 seconds.

Backlight On Continuously: Press ZERO, then 4. Backlight will now stay on all the time.

Backlight Off:

Press ZERO, then 6. Turns backlight off.

SET SAMPLING SPEED

The slower the sampling speed, the more accurate the count will be. The faster the sampling speed, the less accurate the count may be.

01 to 15 (01 = slow, 15 = very fast)

2. Press 0 or 1 to select the desired mode.

3. Press . to exit and save the settings.

PRESET QUANTITY

You can set the way the scale will accept preset quantities.

0 = Scale accepts quantity only when weight is

stable.

1 = Scale accepts quantity even when weight is

unstable.

1. Press ZERO, then 1, 3.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

USEr 0.tYtP

2. Press 0 or 1 to select the desired mode.

3. Press . to exit and save the settings.

SMPL

PC WT

STABLE

M+

Pcs

PAGE 3 OF 30 0321 I H -1114

SETTING FUNCTION MODES CONTINUED

UNIT WEIGHT PRESET DUAL FUNCTION PRIORITY

You can set the UNIT WEIGHT PRESET key to treat either of

its functions (unit weight presets or switch from lb to kg)

to operate as the default function.

0 = Quick press of UNIT WEIGHT PRESET key

operates "kg/lb" (default). Press and hold UNIT WEIGHT PRESET for three seconds to operate the unit weight presets function.

1 = Quick press of UNIT WEIGHT PRESET key

operates unit weight presets function (default). Press and hold UNIT WEIGHT PRESET for three seconds to operate "kg/lb."

1. Press ZERO, then 1, 6.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

USEr UnPS

SMPL

PC WT

STABLE

M+

Pcs

2. Press 0 or 1 to select the desired mode.

3. Press . to exit and save the settings.

ACCUMULATION SETUP

Set the way the scale shows or indicates totalized values.

0 = After pressing M+, display shows totalized value. After three seconds, scale counts back to zero.

1. Press 0, 1 or 2 to select the desired mode.

2. You can set the way the M+ operates.

0 = M+ works only when weight is stable.

1 = M+ works even when weight is unstable.

1. Press ZERO, then 1, 4.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

USEr nnPtP

SMPL

M+

STABLE

Pcs

2. Press 0 or 1 to select the desired mode.

3. Press . to exit and save the settings.

Continuous/Zero

You can set M+ to operate continuously or only after the scale returns to zero.

0 = After pressing M+, scale must return to zero

before M+ works again.

1 = After pressing M+, it’s ready to go again

immediately.

1. Press ZERO, then 1, 5.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

USEr nnP60

SMPL

M+

STABLE

Pcs

1 = After pressing M+, display shows totalized

value. Press CE, scale counts back to zero.

2. Press 0 or 1 to select the desired mode.

2 = After pressing M+, beeper sounds,

display does not show totalized value.

3. Press . to exit and save the settings.

1. Press ZERO, then 1, 1.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

USEr nnPLU

PAGE 4 OF 30 0321 I H -1114

SMPL

PC WT

STABLE

M+

Pcs

CALIBRATION

AUTO CALIBRATION

You must use calibration weights to accurately calibrate the scale. Calibration weights totaling at least 10% of

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

118.3 01

SMPL

PC WT

M+

STABLE

scale’s capacity must be used for accurate calibration.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

118.3 00

SMPL

PC WT

M+

STABLE

NOTE: Calibration weights are sold separately. See uline.com for details.

1. With the scale displaying "0," press and release

• and UNIT WEIGHT PRESET keys simultaneously. After approximately five seconds, the WEIGHT display flashes the scale capacity.

→0 ←

WEIGHT UNIT WEIGHT QUANTITY

NETNET

SMPL

PC WT

5011500.0

M+

STABLE

1. Place weights on the scale equal to the full load capacity. When scale stabilizes, press the MC key.

2. While the scale counts down to 0, remove the weights from the scale. The calibration is complete.

3. Press CE to exit from the calibration mode.

Pcs

NOTE: If weights equalling the full load are not

available, you can enter a weight that is less

than the full load.

4. With the scale displaying "0," press and hold ., then press UNIT WEIGHT PRESET until the WEIGHT display

Pcs

flashes the scale capacity. Release the keys.

5. Enter the weight to be used, then place the weight on the scale. When the scale stabilizes, press the MC key.

6. While the scale counts down to 0, remove the weights from the scale. The calibration is complete.

7. Press CE to exit from the calibration mode.

RECALL THE ORIGINAL CALIBRATION VALUES

1. Press and hold CE, then press UNIT WEIGHT PRESET

Pcs

until the scale counts down to 0. Release the keys. The scale will revert to the original factory calibration values.

USING THE SCALE

COUNTING

Set the piece weight of the items being weighed before doing any counting operations.

WHEN THE PIECE WEIGHT OF THE ITEM BEING WEIGHED IS UNKNOWN

1. Place a sample quantity of items on the scale.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

118.3 0 0

2. Use the number keys (0-9) to enter the number of items placed on the scale

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

118.3

NOTE: While the QUANTITY display flashes for 3 seconds, press the SAMPLE key. (Otherwise, the number entered will be used as the piece weight when the display stops flashing.)

PAGE 5 OF 30 0321 I H -1114

SMPL

PC WT

100 1

M+

STABLE

M+

STABLE

3. While the QUANTITY display is flashing, press the SAMPLE key.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

118.3 ------SAnnP

SMPL

M+

STABLE

4. The count appears on the QUANTITY display when the scale stabilizes.

Pcs

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

118.3 1.1833 100

SMPL

M+

STABLE

WHEN THE PIECE WEIGHT OF THE ITEM BEING WEIGHED IS KNOWN

1. Use the number keys to enter the known weight of

Pcs

the item.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

0.0 1.833 0

SMPL

M+

STABLE

Pcs

USING THE SCALE CONTINUED

2. Press the UNIT WEIGHT key. The count appears on the QUANTITY display.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

0.0 1.833 0

SMPL

PC WT

M+

STABLE

NOTE: The larger the sample weight is, the more accurate the count will be.

NOTE: With both the UNIT WEIGHT and QUANTITY displays showing zero, pressing either UNIT WEIGHT or SAMPLE key will recall the latest piece weight value.

ZERO FUNCTION

Press the ZERO key to re-zero the display. Nothing should

be on the platform. "

" appears next to → 0← symbol

on the WEIGHT display.

The zero setting range is ±2% of the capacity of the scale.

TARE

TARE allows the scale to automatically deduct the weight of the container used to hold item samples.

WHEN THE WEIGHT OF THE CONTAINER IS UNKNOWN

1. Place the empty container on the scale.

TARE CONTINUED

WHEN THE WEIGHT OF THE CONTAINER IS KNOWN (PRESET TARE)

Pcs

1. With nothing on the scale, Press TARE.

→0 ←

NETNET

2. Enter the weight of the container.

→0 ←

NETNET

3. Press TARE.

→0 ←

NETNET

II. When the user mode function for preset tare (see page 3) is set to "1," preset tare will work with a weight on the scale.

NOTE: When the user mode function for preset tare (see page 3) is set to "0," preset tare will not work with a weight on the scale.

WEIGHT UNIT WEIGHT QUANTITY

0.0 ------PrEtA

WEIGHT UNIT WEIGHT QUANTITY

6.8 ------PrEtA

WEIGHT UNIT WEIGHT QUANTITY

6.8 ------0

SMPL

M+

STABLE

M+

STABLE

M+

STABLE

Pcs

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

6.8 0 0

SMPL

PC WT

M+

STABLE

2. Press TARE key.

→0 ←

WEIGHT UNIT WEIGHT QUANTITY

NETNET

SMPL

PC WT

STABLE

M+

------------ tArE

3. When scale stabilizes, net weight appears in the WEIGHT display and

appears next to the NET

symbol.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

0.0 0 0

SMPL

M+

STABLE

CLEAR TARE

1. Remove container from the scale.

2. Press TARE key to clear the tare value. WEIGHT display resets to zero.

1. Place an object on the scale.

Pcs

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

177.5 100177.52

SMPL

2. Enter the weight of the container.

Pcs

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

177.5 1.0 177

SMPL

3. Press TARE.

→0 ←

NETNET

Pcs

WEIGHT UNIT WEIGHT QUANTITY

176.5 99177.52

SMPL

CLEAR PRE-TARE

1. Remove container from the scale.

2. Press TARE key to clear the tare value, WEIGHT display resets to zero. The "

M+

STABLE

M+

STABLE

M+

STABLE

" next to NET will go off.

Pcs

PAGE 6 OF 30 0321 I H -1114

USING THE SCALE CONTINUED

ACCUMULATION

Use the M+ up to 99 times before it must be reset. The totalizing display is limited to a maximum of six digits.

QUANTITY TOTALIZING

1. Place the object on the scale.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

118.3 1001.1833

2. Press M+.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

3. When scale stabilizes, UNIT WEIGHT displays total number of additions.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

118.3 1001

4. After 3 seconds, scale returns to counting mode.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

118.3 1.1833 100

SMPL

PC WT

SMPL

M+

STABLE

PC WT

STABLE

M+

------------ Add

M+

WEIGHT TOTALIZING CONTINUED

3. When scale stabilizes, UNIT WEIGHT displays the total number of additions.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

118.3 01

SMPL

M+

STABLE

4. After 3 seconds, scale returns to weighing mode.

Pcs

→0 ←

NETNET

CLEAR ALL TOTALIZED VALUES

Pcs

WEIGHT UNIT WEIGHT QUANTITY

118.3 00

SMPL

M+

STABLE

Press MC to clear all of the totalized values. " to M+ icon on QUANTITY display switches off. Totals for weight, number of additions and quantity reset to zero.

NOTE: All totals will be lost if the scale is

Pcs

switched off.

UNIT WEIGHT PRESET MEMORY

The scale can store 10 sets of unit weight presets in the number keys (0-9). Once saved, pressing a particular number key will display the unit weight saved in that

Pcs

memory.

Pcs

" next

RECALL QUANTITY TOTALIZED

Both the WEIGHT and the UNIT WEIGHT should display 0.

1. Press M+ to recall the totalized amount.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

118.3 1001

SMPL

PC WT

M+

STABLE

WEIGHT TOTALIZING

1. With UNIT WEIGHT displaying 0, place an object on scale.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

118.3 00

SMPL

PC WT

M+

STABLE

2. Press M+.

→0 ←

WEIGHT UNIT WEIGHT QUANTITY

NETNET

SMPL

STABLE

M+

------------ Add

→0 ←

WEIGHT UNIT WEIGHT QUANTITY

NETNET

SMPL

PC WT

5011500.0

M+

STABLE

NOTE: The UNIT WEIGHT PRESET key is a dual

Pcs

function key. Determine if unit weight preset is set as the main function or the secondary function of this key. If unit weight preset is the

secondary function, hold the UNIT WEIGHT

PRESET key down for three seconds to activate the feature.

SETTING A UNIT WEIGHT PRESET

1. Use the number keys (0-9) to enter the unit weight

Pcs

value you wish to save.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

0.0 0100

SMPL

2. Press UNIT WEIGHT PRESET.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

PrSEt

SMPL

M+

STABLE

M+

STABLE

Pcs

PAGE 7 OF 30 0321 I H -1114

USING THE SCALE CONTINUED

1. Press UNIT WEIGHT PRESET again.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

PrSEt SEt

SMPL

PC WT

STABLE

M+

Pcs

2. Press any number key (0-9) to save the weight in that key’s memory.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

0.0 0100

SMPL

PC WT

STABLE

M+

Pcs

RECALL A UNIT WEIGHT PRESET CONTINUED

1. Press and hold UNIT WEIGHT PRESET.

2. Press any number key (0-9) to recall the unit weight saved in that key’s memory.

QUANTITY AND WEIGHT LIMIT PRESETS

SET A HIGH LIMIT VALUE FOR QUANTITY PRESET

The scale can store a high limit unit quantity value. If the quantity on the scale exceeds the limit value set, the scale beeps and UNIT WEIGHT displays a blinking: QtY.

1. Press QTY PRESET with or without a weight on the scale.

2. Enter the high limit value you wish to set. Use CE to correct the number if necessary.

3. Press SAMPLE. Use CE to correct the number if necessary.

4. Press QTY PRESET to return to counting mode.

TO CLEAR HIGH LIMIT QUANTITY PRESETS

1. Press QTY PRESET with or without a weight on the scale.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

PrSEt

SMPL

PC WT

STABLE

M+

Pcs

SET A HIGH LIMIT VALUE FOR UNIT WEIGHT

The scale can store a high limit unit weight value. If the weight on the scale exceeds the limit value set, the scale beeps and UNIT WEIGHT displays a blinking:

WPSt.

1. Press QTY PRESET with or without a weight on the scale.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

---- 3000

SMPL

M+

STABLE

Pcs

2. Enter the high limit value you wish to set. Use CE to correct the number if necessary.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

---- 300100

SMPL

M+

STABLE

Pcs

3. Press UNIT WEIGHT. Use CE to correct the number if necessary.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

---- 100100

SMPL

M+

STABLE

Pcs

4. Press QTY PRESET to return to counting mode.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

0.0 00

SMPL

M+

STABLE

Pcs

TO CLEAR HIGH LIMIT UNIT WEIGHT PRESETS

1. Press QTY PRESET with or without a weight on the scale.

2. Enter 0.

3. Press UNIT WEIGHT PRESET.

4. Press QTY PRESET to return to counting mode.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

---- 3000

SMPL

M+

STABLE

Pcs

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

0.0 0100

2. Enter 0.

SMPL

PC WT

STABLE

→0 ←

M+

Pcs

NETNET

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

---- 300100

WEIGHT UNIT WEIGHT QUANTITY

---- 100100

SMPL

M+

STABLE

M+

STABLE

3. Press SAMPLE.

4. Press QTY PRESET to return to counting mode.

→0 ←

NETNET

PAGE 8 OF 30 0321 I H -1114

WEIGHT UNIT WEIGHT QUANTITY

0.0 00

SMPL

M+

STABLE

Pcs

USING THE SCALE CONTINUED

AUTO POWER-OFF

When auto power-off time is enabled, the scale will automatically turn off when no load is on platform and scale is stable at zero position for a specified period of time (in minutes). At start-up, auto power-off is turned off.

1. Turn on the scale.

2. Once the scale returns to zero, press the ZERO key. "------ " will be shown in the WEIGHT display.

→••←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

------

3. Press the . key. 01 FnC will be shown in the WEIGHT display.

→••←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

01 FnC

4. Press the MC key. FnC 00 will be shown in the WEIGHT display. The first 0 will flash.

SMPL

M+

0 0

STABLE

M+

STABLE

5. Enter 02 using the numeric keys.

6. Press the MC key. FnC 02 will be shown in the WEIGHT display and 00 will be shown in the UNIT WEIGHT display. The first 0 will flash.

→0 ←

NETNET

WEIGHT UNIT WEIGHT QUANTITY

FnC 02 00

SMPL

PC WT

M+

STABLE

7. Enter the two-digit setting using the numeric keys.

• 00 – Auto power-off is off.

Pclbs

• 01-10 – Auto power-off from 1 to 10 minutes.

→0 ←

NETNET

8. Press the MC key to select the setting.

Pcs

WEIGHT UNIT WEIGHT QUANTITY

FnC 02 05

SMPL

PC WT

M+

STABLE

9. Press the . key twice to exit the setup menu.

Pcs

→••←

FnC 00

NETNET

WEIGHT UNIT WEIGHT QUANTITY

SMPL

M+

STABLE

Pcs

PAGE 9 OF 30 0321 I H -1114

+ 21 hidden pages