UEi PET1 Instruction Manual

1-800-547-5740 • Fax: [phone]

www.ueitest.com • email: [e-mail]

PET1

INSTRUCTION MANUAL

Introduction

The PET1 is a convenient pocket-size multifunction tester, which
combines the latest digital technology with an advanced sensor to
detect high/low AC voltage.

Features include

• Non-contact AC voltage test: from 12-600 V AC
(with adjustable sensitivity)

• Detects high and low AC Voltage

• Continuity check: 0 - 80 MΩ

• Work light

Safety Notes

• The tester should not be used to test voltages above the stated
rated voltage.

• Operating temperature within -10˚ to +50˚C (14˚ to 122˚F)

and a frequency range from 50 to 500 Hz. Best results at a
temperature range up to 86˚F, humidity 80% at altitude up to
6,000 feet.

• The tester must be tested on a known voltage source to make sure

it is operating properly.

• Do not use in the presence of moisture, (e.g. dew or rain)

• Do not use if damaged

• Static electricity may be generated by rubbing the “BODY” of the
tester (when pressing the switch) thus causing the audible and
visual alert to function

• The flashlight lights up when the switch is pressed

• In case of doubt, please consult a qualified technician

Self-Test Function

Prior to use, perform a self-test to ensure full functionality. Press the
switch down and touch the "TIP" with your free hand.

The LED lights red and buzzer sounds indicating " NORM A L FUNCTION ".

Non-Contact AC Voltage Testing

Press the switch to test.

To locate "LIVE/HOT" side of a wire, lower sensitivity until the detector
only sounds on one wire.

Broken wire/fault finding
"FAULT/BREAK" point of a wire is indicated by an interruption in

sound and light (red LED).

Proper connection check

Move the tester close to an un-energized appliance. The buzzer comes
ON when power is applied.

PET1-MAN P. 1

LED

LED