UEi HUB4, HUB6, HUB2 Instruction Manual

INSTRUCTION MANUAL

ENGLISH

Smart Temperature Split Kit
Smart Refrigerant Charging Kit
Smart Refrigerant Complete Kit

1-800-547-5740

www.ueitest.com • email: [e-mail]

HUB2 / HUB4 / HUB6

WPP1

Wireless Pressure
Probe

Power
Lo-Bat

WPP1

Wireless Pressure
Probe

Power
Lo-Bat

WHP1

Wireless
Hygrometer Probe

WHP1: Wireless Hygrometer Probe

WPP1: Wireless Pressure Probe

WPC1: Pipe clamp sensor

UEI HUB APP

WARNING
Read entire safety notes section regarding potential hazard and proper
instructions before using these probes. In this manual the word “WARNING”
is used to indicate conditions or actions that may pose physical hazards to
the user. The word “CAUTION” is used to indicate conditions or actions that
may damage these instrument.

WARNING
To ensure safe operation and service of these probes, follow these instructions.
Failure to observe these warnings can result in severe injury or death.

WARNING
Maximum over pressure is: 1000 PSI.

WARNING

• Do not open these probes to replace batteries while the probes
are connected to an HVACR or other mechanical system.

• To avoid false readings, replace batteries if a low battery indicator appears.

• Do not use this these probes if they appear damaged.

• Always adhere to national and local safety codes. Use proper personal
protective equipment (PPE).

WARNING
These probes are designed for trade professionals who are familiar with the
hazards of their trade. Observe all recommended safety procedures that
include proper lockout utilization and use of personal protective equipment
that includes safety glasses, gloves and flame resistant clothing.

HUB2

2 WHP1
4

Batteries

(AAA)

Carrying case

HUB4

2 WPP1
2 WPC1
4 Batteries (AA)
Carrying case

HUB6

2 WHP1
2 WPP1
2 WPC1
8 Batteries
(4x AA, 4x AAA)
Carrying case

IMPORTANT SAFETY WARNINGS

1. Hygrometer (WHP1): Hub 2 & Hub 6

A. Lock Button: Press to open or close probe
B. 1/4” diameter probe.
C. Magnetic Mount
D. Battery Cover.
E. Light: Blinks GREEN when probe is powered

on. Blinks RED when low battery.*

CAUTION: Press down Lock Button to
release probe. Failure to do so may break probe
and is not covered under warranty.

GENERAL SPECIFICATIONS

Operating Temperature: 41°F to 140°F (5°C to 60°C)
Storage Temperature: 14°F to 140°F (-10°C to 60°C)
Operating Humidity: 20% RH to 80% RH

Recommended: Do Not use longer than 60
hours out of range
Dimensions: 6.84 in x 1.93 in x 1.53 in
(17.4 cm x 4.9 cm x 3.9 cm)

Item Weight: 4.4 oz (125 gr)
Certification: CE Conformity, FCC/IC
Battery Type: (AAA) 2
Battery Life: 100+ hours

* NOTE: Low battery indicator is also in the

“Tool Connection” screen

WHP1 OVERVIEW

WHP1

Wireless
Hygrometer Probe

WHP1

Wireless
Hygrometer Probe

B.

A.

C.

E.

D.

• Remove battery cover.

• Replace the old batteries with 2 new
(AAA) batteries.

• Replace the battery cover.

Battery level are displayed in the
tool connection screen to the right of each
probe connected.

Caution: Take care not to lose the screws

when opening battery compartments

2. Pressure Probe (WPP1): Hub 4 & Hub 6

A. Cable connector plug-in: for connecting the

pipe clamp sensor (WPC1).

B. Battery cover
C. Light: Blinks GREEN when probe is powered

on and blinks RED when low battery.*
D. Power Button: Hold for one second to
power on

E. 1/4”pressure connector
F. 1/4” pass-through connector

*NOTE: Low battery indicator is in the “Tool

Connection” screen

GENERAL SPECIFICATIONS

Operating Temperature: 14°F to 158°F

(-10°C to 70°C)
Storage Temperature: 14°F to 140°F
(-10°C to 60°C)

Operating Humidity: 30% RH to 85% RH
Over-range: 1000 PSI
Dimensions: 6.70 in x 1.56 in x 1.44 in

(17 cm x 4 cm x 3.7 cm)

Item Weight: 7.4 oz (210 gr)
Certification: CE Conformity, FCC/IC
Battery Type: (AA) 2
Battery Life: 100+ hours

3. Pipe clamp sensor (WPC1): Hub 4 & Hub 6

A. Temperature sensor
B. Cable connector plug-in: for connecting

WPC1 to the WPP1.

NOTE: Maximum pipe diameter for WPC1 is 1.5 in.

GENERAL SPECIFICATIONS

Operating Temperature: -40°F to 185°F

(-40°C to 85°C)

Storage Temperature: 14°F to 140°F (-10°C to 60°C)
Dimensions: 5.66 in x 3.81 in x 1.10 in

(14.4 cm x 9.7 cm x 2.8 cm)

Item Weight: 2.1 oz (60 gr)
Certification: CE Conformity, FCC/IC

A. Home Screen:

Refrigerant Side

A. Home Screen:
Air Side

UEi HUB OVERVIEW

B.

A.

A.
B.

C.

D.
E.
F.

WPP1 OVERVIEW

WPC1 OVERVIEW

A. Suction Line Pressure
B. Suction Line Temperature
C. Refrigerant Favorites (tap to view)
D. Liquid Line Pressure
E. Liquid Line Temperature

F. Refrigerant List (tap to view)
G. Air Side Screen (tap or swipe
left to view)
H. Vapor Saturation Temperature
I. Liquid Saturation Temperature

A. Refrigerant Side Screen (tap or
swipe right to view)
B. Delta T
C. Target Delta T (assumes
400 CFM/ton)
D. Return Dry Bulb Temperature

E. Return Wet Bulb Temperature
F. Return and Supply Calculations
(tap to view)
G. Supply Dry Bulb Temperature
H. Supply Wet Bulb Temperature

Hub

Refrigerant Side Air Side

Line Pressure

Line Temp

select tool

select tool

Suction

--.--°F

Vapor
Saturation

--.--°F

Superheat

Line Pressure

Line Temp

select tool

select tool

Liquid

--.--°F

Liquid
Saturation

--.--°F

Subcooling

R507A

Hub

Refrigerant Side Air Side

Line Pressure

Line Temp

select tool

select tool

Suction

--.--°F

Vapor
Saturation

--.--°F

Superheat

Line Pressure

Line Temp

select tool

select tool

Liquid

--.--°F

Liquid
Saturation

--.--°F

Subcooling

R507A

A.

F.
G.

I.

H.

B.

C.

D.

E.

Hub

Refrigerant Side Air Side

--.--°F

Delta T

--.--°F

Target Delta T

Supply Dry Bulb

Supply Wet Bulb

select tool

select tool

Return Dry Bulb

Return Wet Bulb

select tool

select tool

G.

F.

B.

A.

C.

D.

E.

H.

• Remove battery cover.

• Replace the old batteries with 2 new
(AA) batteries.

• Replace the battery cover.

Battery level are displayed in the tool
connection screen to the right of each
probe connected.

Caution: Take care not to lose the screws when

opening battery compartments

Hub

Refrigerant Side Air Side

Line Pressure

Line Temp

select tool

select tool

Suction

--.--°F

Vapor
Saturation

--.--°F

Superheat

Line Pressure

Line Temp

select tool

select tool

Liquid

--.--°F

Liquid
Saturation

--.--°F

Subcooling

R507A

Units

Pressure

Temperature

Enthalpy

Altitude Compensation

Elevation

Units

PSI

°F

btu/lb

1

ft

bar

KPa

°C

Kj/Kg

ft

m

MPa

R11
R12
R13
R22
R23
R113
R114
R123
R1234YF
R124
R125
R134A
R401A (MP39)
R401B
R402A
R402B
R404A
R406A
R407A
R407C
R407F
R408A

R409A
R410A
R414B (Hotshot)
R416A
R417A
R417C (Hotshot 2)
R420A
R421A
R421B
R422A
R422B(NU22B)
R422C (Oneshot)
R422D
R424A
R427A
R434A (RS-45)
R438 (MO99)
R500
R502
R503
R507A
R508B (Suva95)

Refrigerant List: Tap to activate.
Tap stars to add/remove favorites.

B. Units Screen

C. Tool Connection Screen

D. User Info Screen

Refrigerant Favorites Button: displays selected favorites for quick changes.

Tool Connection

Refrigerant Side

Suction

Liquid

Air Side

Nearby Tools

Return

Supply

No tools available

WHP1 70.7 °F

WPP1 215.1 PSI

Drag tool here

Drag tool here

Tool Connection

Refrigerant Side

Suction

Liquid

Air Side

Nearby Tools

Return

Supply

No tools available

WHP1 70.7 °F

WPP1 215.1 PSI

Drag tool here

Drag tool here

User Info

Enter email address

Enter name

Enter phone number

Save

User Info

Enter email address

Enter name

Enter phone number

Save

A.

D.
E.

F.

B.

C.

Units

Pressure

Temperature

Enthalpy

Altitude Compensation

Elevation

Units

PSI

°F

btu/lb

1

ft

bar

KPa

°C

Kj/Kg

ft

m

MPa

B.

A.

C.

D.

E.

A. Pressure Units
B. Temperature Units
C. Enthalpy Units

D. Elevation
E. Units

A. Tool Assigned
B. Forget Tool
C. Tool found but not assigned

D. Battery Level
E. Signal Strength
F. Refresh nearby tools

Tap to select or enter units

Refrigerants

R22

R11

R12

R13

R22

R23

R114

R113

FavoritesSelect

A. Home Screen:

Hub

Refrigerant Side Air Side

Line Pressure

Line Temp

select tool

select tool

Suction

--.--°F

Vapor
Saturation

--.--°F

Superheat

Line Pressure

Line Temp

select tool

select tool

Liquid

--.--°F

Liquid
Saturation

--.--°F

Subcooling

R507A

E. Support Screen

Support

UEitest.com

18005475740

Find a store!

Manual

Support

UEitest.com

18005475740

Find a store!

Manual

A.

B.

C.

D.

A. Contacts
B. Manual
(English, Spanish and French)

C. Find a distributor
@UEitest.com
D. Tap to view Features +
Benefits Video

Caution: This symbol indicates that equipment and its accessories

shall be subject to separate collection and correct disposal.

DISPOSAL

CLEANING

STORAGE

WARRANTY

Periodically clean your probe using a damp cloth. DO NOT use abrasive, flammable
liquids, cleaning solvents, or strong detergents as they may damage the finish,
impair safety, or affect the reliability of the structural components.

Remove the batteries when instrument is not in use for a prolonged period
of time. Do not expose to high temperatures or humidity. After a period of
storage in extreme conditions exceeding the limits mentioned in the General
Specifications section, allow the instrument to return to normal operating
conditions before using it.

The HUB is warranted to be free from defects in materials and workmanship
for a period of 1 year from the date of purchase. If within the warranty
period your instrument should become inoperative from such defects, the
unit will be repaired or replaced at UEi’s option. This warranty covers
normal use and does not cover damage which occurs in shipment or failure
which results from alteration, tampering, accident, misuse, abuse, neglect
or improper maintenance. Batteries and consequential damage resulting
from failed batteries are not covered by warranty.

Any implied warranties, including but not limited to implied warranties
of merchantability and fitness for a particular purpose, are limited to the
express warranty. UEi shall not be liable for loss of use of the instrument or
other incidental or consequential damages, expenses, or economic loss, or
for any claim or claims for such damage, expenses or economic loss.

Warranty only covers hardware and does not extend to software applications.
A purchase receipt or other proof of original purchase date will be required

before warranty repairs will be rendered. Instruments out of warranty will be
repaired (when repairable) for a service charge

For more information on warranty and service, contact:

www.ueitest.com Email: [e-mail]

1-800-547-5740

This warranty gives you specific legal rights. You may also have other rights,
which vary from state to state.

Copyright © 2018 Kane USA Inc. All Rights Reserved. 17500 01/18

FCC and IC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason­able protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communi­cations. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is en­couraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC/IC RSS102 radiation exposure limits set forth for an

uncontrolled environment.
This device complies with Industry Canada license-exempt RSS standard(s). Operation

is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.

Under Industry Canada regulations, this radio transmitter may only operate using an
antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry
Canada. To reduce potential radio interference to other users, the antenna type and its
gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not
more than that necessary for successful communication.

Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur) approuvé
pour l’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique à l’intention des autres utilisateurs, il faut choisir le type d’antenne et son
gain de sorte que la puissance isotrope rayonée équivalente (p.i.r.e.) ne dépasse pas
l’intensité nécessaire à l’établissement d’une communication satisfaisante.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autoris é e aux deux conditions suivantes : (1)
l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en comprom­ettre le fonctionnement.

FCC AND IC NOTICE

This device complies with Part 15 of the FCC rules and Industry Canada license-exempt
RSS 247. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference; and (2) this device must accept any interference received,
including interference that may cause undesired operation.

Cet appareil est conforme à la partie 15 des règles de la FCC, ainsi qu’à la norme RSS 247
exempte de licence d’Industrie Canada. Son fonctionnement est soumis aux deux con­ditions suivantes : (1) Cet appareil ne doit pas provoquer d’interférences nuisibles; et (2)
cet appareil doit accepter toutes les interférences reçues, y compris celles susceptibles
d’entraîner un dysfonctionnement de l’appareil.

FCC CAUTION

The device must not be co-located or operated in conjunction with any other antenna or
transmitter.

Caution the user that changes or modifications not expressly approved by the party
responsible

for compliance could void the user’s authority to operate the equipment.
L’appareil ne doit pas être placé ou utilisé conjointement avec une autre antenne ou un

autre émetteur.
Attention à l’utilisateur que des changements ou des modifications non expressément

approuvés par la partie responsable pour la conformité pourrait annuler l’autorité de l’util­isateur pour faire fonctionner l’équipement.

a.The device should be installed and operated with a minimum distance of 20cm between
the radiator and your body.

L’appareil doit être installé et utilisé avec une distance minimale de 20 cm entre le radia­teu et votre corps.

b.This device complies with RSS247 of Industry Canada. Cet appareil se conforme à
RSS247 de Canada d’Industrie. This device complies with Industry Canada license-ex­empt RSS standard(s). Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.

appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions
suivantes: (1) le dispositif ne doit pas produire de brouillage prejudiciable, et (2) ce dis­positif doit accepter tout brouillage recu, y compris un brouillage susceptible de provo­quer un fonctionnement indesirable.

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada.

FCC/IC INFORMATION