Ubiquiti Networks launches the
latest generation of airMAX ac CPE
(Customer Premises Equipment) with
dedicated Wi-Fi management, the
IsoStation
™
5AC.
Improved Noise Immunity
The IsoStation 5AC provides
high isolation solutions in xed
beamwidth increments through
interchangeable horn antennas that
have been optimized for an urban
environment. The tailored antenna
radiation patterns spatially lters both
in-band and out-of-band spurious
RF emissions to increase the noise
immunity of the IsoStation 5AC.
This feature is especially important
in an increasingly congested RF
environment.
Modular Design
With exible sectorization for
optional antenna beamwidths, the
horn antenna is interchangeable and
improves beam‑shaping for specic
deployment and environment needs.
The IsoStation 5AC uses horn antenna
sectors designed for increased
co-location performance without
sacricing gain.
Providing high throughput and
an innovative form factor, the
IsoStation5AC is versatile and
cost-effective to deploy.
PtMP Client Links
The IsoStation 5AC used as a CPE device for each client in an airMAX PtMP network.
Wireless Client
The IsoStation 5AC as a powerful
wireless client.
Use an IsoStation 5AC on each side of a
PtPlink.
PtP Link
Beam Performance Perfected
Symmetrical Antennas
Symmetrical horn antennas (30° and
45° versions) offer breakthrough
scalability options for wireless
systems. They are ideal for cluster
sector installations with high
co-location requirements.
Unique beam performance and great
co-location characteristics allow
for a higher density of sectors than
traditional sector technology.
Asymmetrical Antennas
Asymmetrical horn antennas (60° and
90° versions) are designed to have
attenuated side lobes and extremely
low back radiation. They offer best
front-to-back ratio in the industry and
the lowest side lobe radiation.
IsoStation 5AC with 45o radiation beam
2
Page 3
Software
Sporting an all-new design for
improved usability, airOS® v8 is the
revolutionary operating system for
Ubiquiti® airMAX ac products.
Powerful Wireless Features
• Access Point PtMP airMAX Mixed
Mode
• airMAX ac Protocol Support
• Long-Range Point-to-Point (PtP)
Link Mode
• Selectable Channel Width
• PtP: 10/20/30/40/50/60/80 MHz
• PtMP: 10/20/30/40 MHz
• Automatic Channel Selection
• Transmit Power Control:
Automatic/Manual
• Automatic Distance Selection
(ACK Timing)
• Strongest WPA2 Security
Dashboard
Datasheet
Wireless Settings
Usability Enhancements
• airMagic® Channel Selection Tool
• Dynamic Conguration Changes
• Instant Input Validation
• Redesigned User Interface
• HTML5 Technology
• Optimization for Mobile Devices
• Detailed Device Statistics
• Diagnostic Tools, including Ethernet
Cabling Test, RF Diagnostics, and
airView® Spectrum Analyzer
U Mobile App
The IsoStation 5AC integrates a
separate Wi-Fi radio for fast and easy
setup using your mobile device.
Accessing airOS via Wi-Fi
The U ®Mobile App provides instant
accessibility to the airOS conguration
interface and can be downloaded
from the AppStore (iOS) or Google
™
Play
(Android). U Mobile allows you
to set up, congure, and manage the
IsoStation 5AC and offers various
conguration options once you're
connected or logged in.
U Mobile Conguration
IsoStation 5AC
Built-In
3
Page 4
Datasheet
Advanced RF Analytics
airMAX ac devices feature a
multi-radio architecture to power a
revolutionary RF analytics engine.
An independent processor on the
PCBA powers a second, dedicated
radio, which persistently analyzes
the full 5 GHz spectrum and every
received symbol to provide you with
the most advanced RF analytics in the
industry.
Real-Time Reporting
airOS 8 displays the following RF
information:
• Persistent RF Error Vector
Magnitude (EVM) constellation
diagrams
• Carrier to Interference-plus-Noise
Ratio (CINR) histograms
• Signal-to-Noise Ratio (SNR) time
series plots
Spectral Analysis
airView allows you to identify noise
signatures and plan your networks to
minimize noise interference. airView
performs the following functions:
• Constantly monitors environmental
noise
• Collects energy data points in
real-time spectral views
• Helps optimize channel selection,
network design, and wireless
performance
airView runs in the background
without disabling the wireless link, so
there is no disruption to the network.
In airView, there are three spectral
views, each of which represents
different data.
• Waterfall Aggregate energy
collected for each frequency
• Waveform Aggregate energy
collected
• Ambient Noise Level Background
noise energy shown as a function of
frequency
airView provides powerful spectrum
analyzer functionality, eliminating the
need to rent or purchase additional
equipment for conducting site
surveys.
Multi-Radio Architecture
Constellation Diagrams
SNI Diagram and CINR Histogram
Dedicated Spectral Analysis
4
Page 5
Packet Prioritization
050100150200250300350400450 Mbps
Technology
Unlike standard Wi-Fi protocol,
Ubiquiti’s Time Division Multiple
Access (TDMA) airMAX protocol
allows each client to send and receive
data using pre-designated time
slots scheduled by an intelligent AP
controller.
This time slot method eliminates
hidden node collisions and maximizes
airtime efciency, so airMAX
technology provides performance
improvements in latency, noise
immunity, scalability, and throughput
compared to other outdoor systems in
its class.
Intelligent QoS Priority assigned to
voice/video for seamless streaming.
airMAX ac TDMA Technology
Timeline
Time Slot 1
Time Slots
Up to 100 airMAX ac stations can be connected to an airMAX ac Sector; fourairMAX
ac stations are shown to illustrate the general concept.
VOIP
Time Slot 2
Data
VOIP
VOIP
Time Slot 3
Time Slot 4
Datasheet
Scalability High capacity and
scalability.
Long Distance Capable of
high-speed, carrier-class links.
Superior Performance
The next‑generation airMAXac
technology boosts the advantages of
our proprietary TDMA protocol.
Ubiquiti’s airMAX engine with custom
IC dramatically improves TDMA
latency and network scalability. The
custom silicon provides hardware
acceleration capabilities to the airMAX
scheduler, to support the high data
rates and dense modulation used in
airMAX ac technology.
Throughput Breakthrough
airMAX ac supports high data rates,
which require dense modulation:
256QAM – a signicant increase from
64QAM, which is used in airMAX.
With their use of proprietary
airMAXac technology, airMAX ac
products supports up to 450+Mbps
real TCP/IP throughput – up to triple
the throughput of standard airMAX
products.
airMAX Network Scalability
U-AME-G1-BR4A
NKC966.001B
1412
TAIWAN
Superior Throughput Performance
150+ Mbps
150+ Mbps
450+ Mbps
5
Page 6
Datasheet
Hardware Overview
Using airMAXac technology, the IsoStation
5AC supports up to 450+ Mbps real
TCP/IP throughput. It also offers the following
features:
• Interchangeable horn antennas for
enhanced beam shaping
• Horn feed comes directly from the radio
input/output so connectors are eliminated
• Single button release for ease of changing
antennas
• All metal, shielded radio base
• Metal strap for quick pole-mounting
Pole-Mounting of the IsoStation 5AC
Horn Antenna Options
The IsoStation 5AC comes with a 45° isolation
antenna. We offer three optional antennas
with precise radiation angles for specic beam
shaping, so you can customize the IsoStation
5AC for your specic installation requirements:
• 30°
• 60°
• 90°
All horn antennas are optimized for
co-location. The asymmetrical versions (60°
and 90°) narrow the elevation pattern to
increase gain where users need it.
Switching Out the 45° Horn Antenna
6
Page 7
Specications
IS-5AC
Dimensions
With Horn
Without Horn
Weight
With Horn
Without Horn
Max. Power Consumption8.5W
Power Supply24V, 0.5A Gigabit PoE Adapter
Power MethodPassive PoE (Pairs 4, 5+; 7, 8 Return)