TZ SlideHandle 4267CF, SlideHandle 4271CF, SlideHandle 4272CF Product Manual

TZ SlideHandle

TZ SlideHandle™ Models: 4267CF, 4271CF, 4272CF

™

Product Manual

TZ SlideHandle™ Models: 4267CF, 4271CF, 4272CF

TZ®, TZ Centurion™, TZ Praetorian™, TZ SlideHandle™, TZ SwingHandle™, TZ Radial™ and TZ SMArt™ are trademarks of TZ Limited.

Patents Pending.

TZ®, TZ Centurion™, TZ Praetorian™, TZ SlideHandle™, TZ SwingHandle™, TZ Radial™ and TZ SMArt™ are trademarks of TZ Limited. Patents Pending.

TZ SlideHandle

Date: January 2015

Document Number: 112346.01_A

page 1 of 13

™

TZ SlideHandle

TZ SlideHandle™ Models: 4267CF, 4271CF, 4272CF

™

About TZ

Telezygology, Inc. (TZ) is a wholly owned subsidiary of publicly listed intellectual property and technology development company TZ Limited with design and engineering operations throughout the United States, Europe and Australia.

TZ is a leader in the integration of intelligence and software control into everyday objects to enable new levels of functionality. Supported by a full product development capability, TZ technology is a platform on which many

dierent solutions can be created by third parties seeking to

integrate remote controlled intelligent locking and sensory devices to add functionality to their products.

TZ solutions fuse software controlled remote locking and fastening, environmental sensing, real time analysis and

measurement to provide adopters with compelling benets

for their products and businesses.

Disclaimer

This document is intended to provide basic technical information related to the TZ SlideHandle This document is not meant to be an exhaustive statement of all relevant data. By using this document, however, you agree to accept and comply with the terms, conditions, notices and disclaimer contained in this document.

™

locking device.

While TZ has used all due care and skill to ensure that the information contained in this document is accurate, correct, and current at the time of publication, it does not warrant or represent that the information is free from errors or omissions, and does not accept responsibility for any defect in the information.

Use of Information Contained in This Document

The correct functions of the TZ SlideHandle™ will require consideration of installation and system integration issues such as networking for power and data, and subsequent programming for functionality.

The TZ SlideHandle

™

described has not been tested or

qualied for a specic application other than for compliance to the specication outlined. Specic qualication testing may be required for t-for-purpose application design.

Caution

Changes or modications not expressly approved by TZ

could void the user’s authority to operate the equipment (FCC Code of Federal Regulations Title 47 Part 15.21).

TZ®, TZ Centurion™, TZ Praetorian™, TZ SlideHandle™, TZ SwingHandle™, TZ Radial™ and TZ SMArt™ are trademarks of TZ Limited. Patents Pending.

page i

TZ SlideHandle

TZ SlideHandle™ Models: 4267CF, 4271CF, 4272CF

Contents

1. TZ SlideHandle 1

1.1 Introduction 1

1.2 Device Overview 1

1.3 Contents of the Standard Package 2

1.4 Features 2

1.5 System Example 3

1.6 SlideHandle Model and Cabinet Model 3

™

2. Operation / Behavior 4

2.1 Electrical Connections and Features 4

2.2 LED Display 5

2.3 Opening / Closing 6

2.4 Use of Key 7

3. Installation 7

Appendix 1: TZ SlideHandle Reference Data 8

Appendix 2: TZ SlideHandle Electrical Specications 9

Appendix 3: TZ SlideHandle Models and Cutouts 10

Appendix 4: Compatibility Chart 11

TZ®, TZ Centurion™, TZ Praetorian™, TZ SlideHandle™, TZ SwingHandle™, TZ Radial™ and TZ SMArt™ are trademarks of TZ Limited. Patents Pending.

page ii

TZ SlideHandle

TZ SlideHandle™ Models: 4267CF, 4271CF, 4272CF

™

Figure 1: TZ SlideHandle

1.1. Introduction

Telezygology, Inc. (TZ) is the inventor of intelligent fastening, locking and actuation devices that in combination with TZ software and communication gateways provide a networked platform that extends traditional access control networks to asset level protection and creates compelling security, locking, monitoring and control applications across a number of market segments.

TZ control networks consist of the TZ SlideHandle, TZ Radial and other locking devices, interconnect modules, physical and environmental sensors and industry standard access control input translators, all of which can be connected

to and controlled from stand-alone control devices and

computers via the Internet.

This manual only provides detailed technical information about the TZ SlideHandle locking device. Please refer to the appropriate system or component manual for information on other TZ products.

™

1.2. Device Overview

TZ SlideHandle in Figure 1 is an intelligent locking device that

oers a drop-in replacement for legacy manual swing-handle

data center cabinet locks. The device integrates a high load Shape Memory Alloy (SMA) actuated locking mechanism

with touch to release option, a multi-color LED status indicator, manual key over-ride, electronic door status sensor and RJ-45 connector.

The TZ SlideHandle is powered and controlled via standard UTP Cat5e / Cat6 cabling through a TZ Praetorian Junction or TZ Centurion

congured for direct connection to a relay output or dry

contact closure system using a TZ Port Link device.

Bridge. Additionally, it may also be rmware

TZ®, TZ Centurion™, TZ Praetorian™, TZ SlideHandle™, TZ SwingHandle™, TZ Radial™ and TZ SMArt™ are trademarks of TZ Limited. Patents Pending.

page 1 of 13

TZ SlideHandle

TZ SlideHandle™ Models: 4267CF, 4271CF, 4272CF

™

1.3. Contents of the Standard Package

The TZ SlideHandle comes complete with the following items in the box:

> 1 x TZ SlideHandle 4200 Series

> 1 x Magnetic reed door sensor

> 1 x Installation yer

> 1 x Accessory kit (contains various mounting hardware)

The specic model of TZ SlideHandle and the contents of the

accessory kit depend on what cabinet the TZ SlideHandle is to be used with. A list containing the exact part number, cabinet model, and additional mounting hardware can be found at: ixp.tz.net/sites/default/les/cabinet_compatiblity.

pdf or contact TZ to obtain the latest TZ SlideHandle cabinet

compatibility matrix.

In order to allow for dierent keying possibilities, the key and

lock cylinder for the override are not included in the standard

package, and they are not installed until on-site installation of the system. There are ve dierent possible keys for the TZ

SlideHandle, although more can be accommodated. Contact TZ for more information on ordering.

1.4. Features

Unlike standard cabinet handles, the TZ SlideHandle contains a microprocessor that is able to execute a wide variety of features and functions – both internal and external

– to facilitate the safe and ecient operation of a data center.

These features and functions include:

> Design to replace existing swing handle latches with a

simple and reversible installation procedure.

> Mounting compatible with industry standard 25mm wide

openings for swing handle latches.

> Housing sits completely outside the cabinet door.

> Mechanism interfaces with existing designs for multi-

point latching and split French doors, and provides same level of physical security.

> Communicates device status and connected sensor

status (depending on protocol).

> Can be powered via up to 100m cable length via twisted-

pair cabling (Cat5 or Cat6).

> Connects into RJ45 based twisted pair cabling

infrastructure with standard patch cables.

> RS-485 serial communication allows remote unlocking,

opening, and feedback on status.

> Multiple sensors allow reporting on true security status of

an enclosure, not just whether latch is open or closed.

> Status LED indicator visible from end of cabinet row.

> Integrated manual key override.

> Auxiliary sensor devices (temperature, humidity, liquid)

available.

Many of these capabilities can be programmed to provide

specic, customised behavior to suit an extensive range of

applications.

TZ®, TZ Centurion™, TZ Praetorian™, TZ SlideHandle™, TZ SwingHandle™, TZ Radial™ and TZ SMArt™ are trademarks of TZ Limited. Patents Pending.

page 2 of 13

TZ Centurion

™

Weigand Translator

Third Party

Card Reader

TZ Centurion™

Bridge

TZ SlideHandle

TZ SlideHandle™ Models: 4267CF, 4271CF, 4272CF

Structured Cable

™

TZ SlideHandle

™

Figure 2: TZ Centurion™ System

1.5. System Example

The TZ SlideHandle is part of a technology-driven access

control solution and is typically part of a larger networked system of devices like that shown in Figure 2.

The system is an example of a simple conguration that can be used to give remote-controlled access to a small set of cabinets through the use of a Radio-Frequency Identication

(RFID) cards or through the web. Devices are networked through standard Cat 5 network cabling, and the complete system is controlled by an embedded web enabled TZ Centurion Bridge.

Network

TZ Centurion™ Server

1.6. TZ SlideHandle Model and Cabinet Model

In order to retrot the large number of cabinet manufacturers and cabinet models, there are a few dierent models of TZ

SlideHandle device, and an additional mounting kit (beyond what is included in the box) may be necessary. Please refer to (http://ixp.tz.net/sites/default/les/cabinet_compatiblity.

pdf) or contact TZ to obtain the latest TZ SlideHandle cabinet

compatibility matrix.

Every application is dierent, and TZ solutions oer the exibility to accommodate multiple situations.

TZ®, TZ Centurion™, TZ Praetorian™, TZ SlideHandle™, TZ SwingHandle™, TZ Radial™ and TZ SMArt™ are trademarks of TZ Limited. Patents Pending.

page 3 of 13

2. Operation / Behavior

2.1. Electrical Connections and Features

The TZ SlideHandle has several features and electrical connections outlined in Figure 3.

TZ SlideHandle

TZ SlideHandle™ Models: 4267CF, 4271CF, 4272CF

™

Figure 3: Features and electrical connections of the TZ SlideHandle

TZ®, TZ Centurion™, TZ Praetorian™, TZ SlideHandle™, TZ SwingHandle™, TZ Radial™ and TZ SMArt™ are trademarks of TZ Limited. Patents Pending.

™

page 4 of 13

TZ SlideHandle

TZ SlideHandle™ Models: 4267CF, 4271CF, 4272CF

2.2. LED Display

The LED display on the front face of the TZ SlideHandle indicates the state of the device and the secureness of the enclosure. The default colors are given in Table 1. This behavior is programmable in the TZ Centurion system, but not the TZ Praetorian system. Consult the appropriate manual for more details.

Table 1: Explanation and behavior of icons and TZ SlideHandle™ in the Device Status tab

™

TZ SlideHandle

Solid Red

Solid Green

Flashing Orange

™

Device Status Door State Description

SlideHandle is closed and locked

Door is closed

TZ SlideHandle is unlocked via any authorized access method through the access controller.

Door may be open or shut

Flashing Red

Door is closed.

The TZ SlideHandle is ready to be opened either by pressing the button on the TZ Praetorian Trigger, or by pressing the top of the TZ SlideHandle

SlideHandle is locked with the door open

The key override has been used to unlock the TZ SlideHandle without electronically authorizing the unit

TZ®, TZ Centurion™, TZ Praetorian™, TZ SlideHandle™, TZ SwingHandle™, TZ Radial™ and TZ SMArt™ are trademarks of TZ Limited. Patents Pending.

page 5 of 13

TZ SlideHandle

TZ SlideHandle™ Models: 4267CF, 4271CF, 4272CF

2.3. Opening / Closing

To open the TZ SlideHandle, the controller (typically a TZ Centurion Bridge or a TZ Praetorian Junction) must send the proper authorisation command, which is typically done when the user swipes an RFID card or presents other similar credentials.

Once properly authorised, the LED display will ash orange. Simply press lightly on the top of the TZ SlideHandle as shown in

Figure 4.

™

Figure 4: User opens the TZ SlideHandle™ by pressing on top.

The top portion will pop up, the LED indicator will change from ashing orange to solid green, and the enclosure door(s) will be

unlocked. The enclosure can now be opened by pulling on the TZ SlideHandle as though it where a doorknob.

To secure the enclosure again, close the enclosure door(s) and press the top portion of the TZ SlideHandle down as shown in Figure 5. The top should click securely, and the solid green LED indicator should turn solid red.

Figure 5: User closes and secures the cabinet by shutting the door and pressing the top down.

TZ®, TZ Centurion™, TZ Praetorian™, TZ SlideHandle™, TZ SwingHandle™, TZ Radial™ and TZ SMArt™ are trademarks of TZ Limited. Patents Pending.

page 6 of 13

TZ SlideHandle

TZ SlideHandle™ Models: 4267CF, 4271CF, 4272CF

™

2.4. Use of Key

To open via the key override, simply insert the key into lock cylinder in the base of TZ SlideHandle (as shown by key icon)

and rotate it approximately 1/8 turn until the TZ SlideHandle

opens. The top will pop open and the LED indicator will

ash red. Return key to original position and remove. The TZ

SlideHandle will not lock, and the key cannot be removed until key is returned to original position.

3. Installation

Because the TZ SlideHandle is designed to retrot a large

number of cabinet manufacturers and cabinet models, the

installation procedures vary. Installation yers are included

with each model, and are available on the website (http://ixp.tz.net/sites/default/les/cabinet_compatiblity.pdf) or contact TZ to obtain the latest TZ SlideHandle cabinet compatibility matrix.

TZ®, TZ Centurion™, TZ Praetorian™, TZ SlideHandle™, TZ SwingHandle™, TZ Radial™ and TZ SMArt™ are trademarks of TZ Limited. Patents Pending.

page 7 of 13

Appendix 1: TZ SlideHandle Reference Data

Specications Overview

Specications subject to change to suit particular application requirements.

TZ SlideHandle

TZ SlideHandle™ Models: 4267CF, 4271CF, 4272CF

™

Physical And Mountings

Dims (mm): 182.3mm tall (207.3mm when open), 43.5mm

wide, 35.9mm out from door, 21.2mm in from door.

Dims (inches): 7.17” tall (8.16” when open), 1.71” wide,

1.41” out from door, 0.83” in from door.

Mounting:

via 2 x M4 (#8) screws and clamp piece.

Mounts to doors with standard 25mm x 150mm (5.9” x

1”) or 25mm x 125mm (4.9” x 1”) opening (with or without center of cutout blanked).

5mm max door panel thickness.

> Grip dimensions of 3mm to 24mm can be accommodated

with standard spacers and locking cams. Contact TZ for

specic application requirements.

Environmental and Performance

Operating temperature: -15°C to +55°C (5°F to 131°F).

Survival temperature: -55°C to +85°C (-67°F to +185°F).

Humidity (operating): 95% RH at 50°C (122°F).

Operating cycles: MTTF > 125,000.

Ingress protection: IP 51.

Electrical

Supply voltage: 9.0 – 32.0 VDC.

Power consumption (operating): < 3.5 W average.

Power consumption (standby): < 400 mW.

RJ-45 pin-out: 1: +Coms | 2: -Coms | 3: AUX-OUT1 |

4: AUX-IN1, 5: Gnd | 6: AUX-OUT2, 7: AUX-IN2 | 8: +V.

RS485 coms for communication with TZ control systems;

closing contact operation for connection to dry contact systems.

Standards Compliance

FCC Part 15, CE, UL (c-us) per IEC/UL/CSA 60950-1.

RoHS compliant

> One year limited warranty.

Dimensions (mm)

TZ®, TZ Centurion™, TZ Praetorian™, TZ SlideHandle™, TZ SwingHandle™, TZ Radial™ and TZ SMArt™ are trademarks of TZ Limited. Patents Pending.

page 8 of 13

TZ SlideHandle

TZ SlideHandle™ Models: 4267CF, 4271CF, 4272CF

Appendix 2: TZ SlideHandle Electrical Specications

The following is a description of the electrical specications of the 4200 Series TZ SlideHandle, including voltage, power supply

and interfacing.

Electrical Application Description

Absolute maximum supply voltage: 12V/24V nominal: 32.0 VDC

Operating supply voltage range: 12v nominal: 9.0 – 32.0 VDC

Power supply conditioning: Must be operated from a well-conditioned, regulated power supply free of noise

and transients.

Reverse Polarity Supply Protection: Not protected.

™

Power Supply Current Limiting: No internal supply current limiting is provided. Devices should be connected to

their power supply via a current limiting protection device, such as a re-settable

fuse of appropriate rating.

Power Supply Filtering: No power supply ltering is included internal to the device. High level, fast

rise-time pulse width modulation artifacts with a fundamental frequency of

nominally 100 kHz will be superimposed on the power supply during operation.

External power supply ltering will normally be required to meet electromagnetic

compatibility and other power feed system requirements.

Electromagnetic Compatibility: No conformance with EMC requirements is guaranteed without the use of

external power conditioning and ltering provisions.

Auxiliary Sensing Interface: Auxiliary A/D sensing interface providing 8 bit resolution for signals in the range

0V to full scale of 3.3V. Input is protected from damage by voltages in the range

+/- 20 VDC.

RS-485 Interface: Depending on device conguration, may be used for RS-485 network control

(using TZ proprietary protocol). RS-485 port lines are not protected against over-voltage, transients or static, beyond the inherent capability of the MAX3471

interface chip used within the device. Refer to the device data sheet for details.

TZ®, TZ Centurion™, TZ Praetorian™, TZ SlideHandle™, TZ SwingHandle™, TZ Radial™ and TZ SMArt™ are trademarks of TZ Limited. Patents Pending.

page 9 of 13

Appendix 3: TZ SlideHandle™ Models and Cutouts

TZ SlideHandle

TZ SlideHandle™ Models: 4267CF, 4271CF, 4272CF

™

TZ®, TZ Centurion™, TZ Praetorian™, TZ SlideHandle™, TZ SwingHandle™, TZ Radial™ and TZ SMArt™ are trademarks of TZ Limited. Patents Pending.

page 10 of 13

Appendix 4: Compatibility Chart

TZ SlideHandle is compatible with the following cabinets:

TZ SlideHandle

TZ SlideHandle™ Models: 4267CF, 4271CF, 4272CF

™

Manufacturer Cabinet Model SlideHandle™

APC NetShelter SX, Single Door, Left Hinge

NetShelter SX, Single Door, Right Hinge

Net Shelter SX, Split Door

VX Seismic, Single or Split Door

Belden XSF, XMF, XME, XMER, with Swing Handle, Right Hinge

XSF, XMF, XME, XMER, with Swing Handle, Left Hinge

Chatsworth CPI

Dell 4210 4272CF 112479.04 112525.01

EMC EMC Symmetrix with Compression Latch, Right or Left Hinge

Gesab Eglon V2 4272CF 112479.04 112723.01

Great Lakes Lake Eect

Hitachi AMS 2500 H5 with Slam Lock

Homan Net Series, Single Door, Left Hinge

TeraFrame (F-series & N-series)

SteelFrame (T-series), Single or Split Door

SteelFrame (Gen 1) with Cam Lock, Single Door

MegaFrame, Single Door

GlobalFrame, Single Door

GlobalFrame, Split Door

CubeIT, Single Door

EMC Vmax, Single Front Door

EMC Vmax, Single Rear Door

EMC Vblock Single Front Door

EMC Vblock Double Rear Door

E-Series

ES-Series

VSP with Single Point Lock

SAN Frames using Hex Key Latch system - Left Hinge

SAN Frames using Hex Key Latch system - Right Hinge

Net Series, Single Door, Right Hinge

Net Series, Split Door

ModelNumber

4272CF-R

4272CF

4272CF-R

4272CF

4272CF-R

4272CF

4272CF-R

4272CF

SlideHandle™

Part Number

112479.08

112479.04

112479.08

112479.04

112479.08

112479.04

112479.08

112479.04

112479.08

112479.04

MountingKit

Not Required

112526.01

Not Required

112745.01

112834.01

112505.01

Not Required

112767.01

112766.01

112886.01

112505.01

TZ®, TZ Centurion™, TZ Praetorian™, TZ SlideHandle™, TZ SwingHandle™, TZ Radial™ and TZ SMArt™ are trademarks of TZ Limited. Patents Pending.

page 11 of 13

Appendix 4: Compatibility Chart

TZ SlideHandle is compatible with the following cabinets:

TZ SlideHandle

TZ SlideHandle™ Models: 4267CF, 4271CF, 4272CF

™

Manufacturer Cabinet Model SlideHandle™

HP 10000 Series G2, Single Door, Left Hinge

10000 Series G2, Split Door

10000 Series G1, Single Door, Left Hinge

10000 Series G1, Split Door

IBM Netbay with Compression Latch

Netbay with Compression Latch

T42 Single Door , Right Hinge

T42 Split Door , Left Hinge

Cabinets using Southco Compression latch, Right Hinge

Cabinets using Southco Compression latch, Left Hinge

DS8300 Series Front Door

DS8300 Series Rear Door

IMS Titan DT, Single Door, Right Hinge

Titan DT, Single Door, Left Hinge

Titan DT, Split Door with Gear Box

Knurr Miracel, Single Door, Multi-Point Latch 4272CF 112479.04 112502.01

Ortronics Mighty Mo with Swing Handle, Right Hinge

Mighty Mo with Swing Handle, Left Hinge

Panduit Net Access (CS1, CS2, CN1, CN2, CN4, CN5), Single Door, Left Hinge

Net Access (CS1, CS2, CN1, CN2, CN4, CN5), Single Door, Right Hinge

Net Access (CS1, CS2, CN1, CN2, CN4, CN5), Split Door

Net Access, Dual Hinging Door using Both Hinges, Left Hinge

Net Access, Dual Hinging Door using Both Hinges, Right Hinge

Net Access, Dual Hinging Door using One Hinge Only, Left Hinge

Net Access, Dual Hinging Door using One Hinge Only, Right Hinge

Net-Serv, Single Door, Left Hinge

Net-Serv, Single Door, Right Hinge

Net-Serv, Split Door

RF Mote and Cable Talk

RFM Series Cabinets with Paddle Latch, Left Hinge

RFM and CableTalk Cabinets with Paddle Latch, Right Hinge

RFM and CableTalk Cabinets with Standard Swinghandle, Right Hinge

RFM and CableTalk Cabinets with Standard Swinghandle, Left Hinge

ModelNumber

4271CF-R

4272CF-R

4271CF-R

4272CF-R

4272CF

4272CFR

4272CF

4272CFR

4272CF

4272CFR

4272CF

4272CF-R

4272CF

4272CF-R

4272CF

4272CF-R

4272CF

4272CF-R

4272CF

4272CF-R

4272CF

4272CF-R

4272CF

4272CF-R

SlideHandle™

Part Number

112479.07

112479.08

112479.07

112479.08

112479.04

112479.08

112479.04

112479.08

112479.04

112479.08

112479.04

112479.08

112479.04

112479.08

112479.04

112479.08

112479.04

112479.08

112479.04

112479.08

112479.04

112479.08

MountingKit

112484.01

112535.01

112640.01

112641.01

112765.01

Not Required

112733.01

112505.01

Not Required

112642.01⁴

112642.02

Not Required

112665.01

Not Required

TZ®, TZ Centurion™, TZ Praetorian™, TZ SlideHandle™, TZ SwingHandle™, TZ Radial™ and TZ SMArt™ are trademarks of TZ Limited. Patents Pending.

page 12 of 13

Appendix 4: Compatibility Chart

TZ SlideHandle is compatible with the following cabinets:

TZ SlideHandle

TZ SlideHandle™ Models: 4267CF, 4271CF, 4272CF

™

Manufacturer Cabinet Model SlideHandle™

ModelNumber

Rittal TS-8, Single or Split Door, Comfort Handle, Right Hinge,

4271CF

SlideHandle™

Part Number

112479.03

MountingKit

112482.01

Solid or Diamond Mesh Door

TS-8, Single or Split Door, Comfort Handle, Left Hinge,

4271CF-R

112479.07

112482.01

Solid or Diamond Mesh Door

TS-8, Single or Split Door, Comfort Handle, Right Hinge,

4271CF

112479.03

112821.01

Solid or Hex Mesh Door

TS-8, Single or Split Door, Comfort Handle, Left Hinge,

4271CF-R

112479.07

112821.01

Solid or Hex Mesh Door

TS-8, Split Door, Slam Lock

Wrightline Paramount, Single Door, Left Hinge

Paramount, Split Door

Vantage S2, Single Door, Left Hinge

Vantage S2, Split Door

Note:

1. TZ SlideHandle is compatible with the majority of server cabinets and does not require any special mounting kit. If a mounting kit is required, it is listed above.

2. Mounting kits are designed for standard cabinet congurations as specied by the cabinet manufacturer.

3. In the event that you cannot nd your cabinet model in the table, please contact TZ for further information. This table is updated fr

4. Only 1 mounting kit required for each dual hinging door.

4272CF

4272CF-R

112479.04

112479.08

equently.

112525.01

112466.01

TZ®, TZ Centurion™, TZ Praetorian™, TZ SlideHandle™, TZ SwingHandle™, TZ Radial™ and TZ SMArt™ are trademarks of TZ Limited. Patents Pending.

page 13 of 13

TZ SlideHandle

TZ SlideHandle™ Models: 4267CF, 4271CF, 4272CF

™

TZ®, TZ Centurion™, TZ Praetorian™, TZ SlideHandle™, TZ SwingHandle™, TZ Radial™ and TZ SMArt™ are trademarks of TZ Limited. Patents Pending.

ixp.tz.net

page 14 of 13

TZ SlideHandle 4267CF, SlideHandle 4271CF, SlideHandle 4272CF Product Manual

Specifications and Main Features

Frequently Asked Questions

User Manual