Tyco RM-DCM-2 User Manual
Shown with optional I8 input module,
R8 output module, and battery
DATA SHEET
RM-DCM-2
Door Control Module with Enclosure
Features That Make a Difference:
Full-featured local door control module lowers wiring costs
Complete set of inputs and outputs to control one door
Flexible control options for reader LEDs and beep patterns
Easily expandable
Additional internal etch connections support magnetic lock features
and accommodate local bypass switch
Optional LCD provides clear instructions that help simplify
startup and diagnostics
Status LEDs on inputs and outputs for quick troubleshooting
Built-in tamper switch provides secure installation
Plug-in screw terminals reduce installation time
Put a full-featured RM-4E door control module in a UL listed,
tamper-protected enclosure and you have the powerful
Software House
support up to two RM-4Es and a choice of up to two I8 input
boards or R8 output boards, providing a single enclosure for
doors with IN and OUT readers.
RM-DCM-2 supports both Wiegand and magnetic stripe
readers and provides additional wiring to magnetic locks
if required.
The RM-4E modules create the connectivity between a reader
and a control panel when third party card readers are used on
a C•CURE
two supervised inputs and two SPDT relays (no ARM-1s
are necessary). The LEDs and optional LCD display provide
diagnostics to simplify the installation.
®
RM-DCM-2. RM-DCM-2 is designed to
®
system. In addition, the RM-4E modules provide
RM-DCM-2 provides standby power with its built-in
uninterruptible power supply (UPS).
With its robust feature set, RM-DCM-2 is designed to handle
the most demanding access control applications with ease
while offering numerous installation and service features that
lower its life cycle cost.
SPECIFICATIONS
30.48 cm
(12.00 in)
26.67 cm
(10.50 in)
3.81 cm
(1.50 in)
3.175 cm
(1.25 in)
33.02 cm
(13.00 in)
35.56 cm
(14.00 in)
Physical
Enclosure Dimensions (H x W x D) . . 356 x 305 x 89 mm
(14 x 12 x 3.5 in)
RM-4E Board-Only
Dimensions (H x W) ............. 136 x 181 mm
(5.375 x 7.125 in)
Weight (with 4Ah battery) .........5.9 kg (11 lbs)
Weight (without battery) ..........4.5 kg (8 lbs)
Construction ................... 20 AWG metal wall mounted locking
cabinet with tamper switch on door
Environmental
Operating and Storage
Temperature ................... 0 ° to 50°C (32° to 122°F)
5 to 95% RH, non-condensing
Electrical
Power Requirements
without Reader or Relays ......... +12 VDC +/- 5% or +24 VDC +/-10%,
280 mA max
Power Requirements, Maximum,
with Reader and Relays .......... +12 VDC +/- 5% or +24 VDC +/-10%,
550 mA max
Output Relay Power Ratings .......Up to 30 VAC/DC, 5A maximum
Reader LED Output Controls ......4.0 volts to 5.25 volts, 20mA max
Power Available for Reader ........ 5 VDC +/- 10% or 12 VDC +/- 10%,
125mA max (at 5V or 12V)
Optional Battery ................ 12V/4Ah battery provides
nominal 4 hours backup time
Regulatory
UL 294
CE, including EN50081-1, EN50130-4, EN50133
FCC Part 15 Class A
RoHS
Three status LEDs for each supervised input
LED on each relay output
LEDs for RS-485 transmit and receive
LED for power-on
Optional LCD for diagnostics
Eight position dipswitch for feature selection:
• Wiegand/magnetic stripe reader type
• Tamper bypass
• LED pattern
• RM bus termination
• Input LED disable
Mounting Specifications
Communications
Communications Bus ............ RM bus from iSTAR controller
Communications Type ...........RS-485 half duplex, two-wire
Maximum Distance ..............1,219 m (4,000 ft)
or apC/8X panel
Reader, Inputs & Outputs
Reader Ports ..................One
Reader Support ................Wiegand or magnetic stripe
Reader Control Lines Available .....Red LED, green LED, yellow LED, beeper
Keypad Support ................ Terminals provided for external 3x4
Supervised Inputs ...............Two, double-resistor
Output Relays ..................Two, Form C, dry contact
Tamper Input ..................One
Indicators and Switches
Product offerings and specifications are subject to change without notice. Actual products may vary from photos. Not all products include all features. Availability varies by region;
contact your sales representative. Certain product names mentioned herein may be trade names and/or registered trademarks of other companies.
©2008 Tyco International Ltd. and its respective companies. All rights reserved. SH0118-DS-200810-R02-A4-EN
matrix keypad
www.swhouse.com
Loading...