Page 1
General Purpose Relays
PCB Relays
Miniature PCB Relay RE
n
1 pole 6 A, 1 form A (NO) contact
n
Sensitive coil 200 mW
n
4 kV coil-contact
n
Optimized height 10.6mm
n
PCB area 200mm
n
Wash tight
n
Product in accordance to IEC 60335-1 (domestic appliances)
Typical applications
PLC’s, timers, temperature control, I/O cards, white goods
2
SCHRACK
F0141-B
ZV
Approvals
VDE REG.-Nr. 5063, UL E214025
Technical data of approved types on request
Contact Data
Contact arrangement 1 form A (NO)
Rated voltage 250VAC
Max. switching voltage 400VAC
Rated current 6A
Limiting making current, max 4s, duty factor 10% 15A
Breaking capacity max. 1500VA
Contact material AgCdO, AgNi 0.15, AgNi 90/10
Frequency of operation, with/without load 360/72000 ops./h
Operate/release time max. 10/5ms
Bounce time max. 4ms
Contact ratings
Type Contact Load Cycles
IEC 61810
RE030 A (NO) 6A, 250VAC, cosφ=1, 70°C 100x10
RE034 A (NO) 6A, 250VAC, cosφ=1, 70°C 100x10
UL 508
RE030 A (NO) 1/4 hp, 240VAC, motor 40°C 30x10
RE030 A (NO) B300 pilot duty 40°C 6x10
RE034 A (NO) 6A, 250VAC,general purpose, 70°C 100x10
RE034 A (NO) B300 pilot duty 40°C 6x10
Mechanical endurance >30x106 ops.
Coil Data
Coil voltage range 5 to 48 VDC
Operative range, IEC 61810 2
Coil insulation system according UL1446 F
Coil versions, DC coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10%1) mW
5 5 3.5 0.5 125 200
6 6 4.2 0.6 180 200
12 12 8.4 1.2 720 200
18 18 12.6 1.8 1620 200
24 24 16.8 2.4 28801) 200
48 48 33.6 4.8 115201) 200
1)
Coil resistance ±15%.
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
3
3
3
3
3
3
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Insulation Data
Initial dielectric strength
between open contacts 1000V
between contact and coil 4000V
Initial insulation resistance
open contact circuit >10x109Ω
coil-contact circuit >10x109Ω
Clearance/creepage
between contact and coil ≥4/4mm
Material group of insulation parts IIIa
Tracking index of relay base PTI250V
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ section, application notes and all specifications
are subject to change.
rms
rms
1
Page 2
General Purpose Relays
PCB Relays
Miniature PCB Relay RE (Continued)
SCHRACK
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Resistance to heat and fire according EN 60335, par.30
Ambient temperature -40 to +70°C
-40 to +85°C at 4A
Category of environmental protection
IEC 61810 RTIII - wash tight
Vibration resistance (functional) 10g
Terminal type PCB-THT
Resistance to soldering heat THT
IEC 60068-2-20 260°C/5s
Packaging/unit tube/25 pcs.
PCB layout / terminal assignment
Bottom view on solder pins
S0176-BH
S0176-BJ
Dimensions
S0271-AH
Product code structure Typical product code RE 0 3 2 012
Type
RE Miniature PCB Relay RE
Version
0 Wash tight
Contact configuration
3 1 form A (NO) contact
Contact material
1 AgNi 0.15 2 AgNi 0.15 gold plated
4 AgNi 90/10 0 AgCdO
Coil
Coil code: please refer to coil versions table
Product code Version Contacts Contact material Coil Part number
RE030005 wash tight 1 form A AgCdO 5VDC 1393217-1
RE030006 1 NO contact 6VDC 1393217-2
RE030012 12VDC 1393217-4
RE030024 24VDC 1393217-8
RE030048 48VDC 1-1393217-1
RE032005 AgNi 0,15 5VDC 1-1393217-9
RE032006 gold plated 6VDC 2-1393217-0
RE032012 12VDC 2-1393217-2
RE032024 24VDC 2-1393217-4
RE032048 48VDC 2-1393217-5
RE034005 AgNi 90/10 5VDC 2-1416010-3
RE034006 6VDC 2-1416010-4
RE034012 12VDC 2-1416010-6
RE034024 24VDC 2-1416010-7
RE034048 48VDC 2-1416010-8
2
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ section, application notes and all specifications
are subject to change.
Loading...