Tyco P7100IP User Manual
Operator’s Manual
MM101332V1
Rev. K, Sep/06
M/A-COM
P7100
Portable Radios
IP
Series
MM101332V1, Rev. K
MANUAL REVISION HISTORY
REV DATE REASON FOR CHANGE
R1A Mar/03 Initial release
R2A Jun/03 Added UHF—H (4W) and P25 functionality.
R3A Feb/04 Added UHF-L (4W).
D Feb/04 Added CE M ark and safety symbol conventions.
E May/04 Improved detail in operating instructions.
F Nov/04 Added RU101219V71-V73 information. Updated battery information and CE marking information.
G Jun/05 Added VHF maritime channel information and Preventive Maintenance recommendations for Immersion-rated radios. Updated
H Jun/05 Updated for IC VHF maritime regulatory approval.
J Oct/05 Added Radio TextLink, battery conditioning, P25T, & Select model radios.
K Sep/06 Updated battery conditi oning and safety symbols and added WEEE symbol and statement. Reformatted to 8.5 x 11.
M/A-COM Technical Publications would particularly appreciate feedback on any errors found in this document and suggestions on how the document could
be improved. Submit your comments and suggestions to:
Wireless Systems Business Unit
M/A-COM, Inc. fax your comments to: 1-434-455-6851
Technical Publications or
221 Jefferson Ridge Parkway e-mail us at: techpubs@tycoelectronics.com
Lynchburg, VA 24501
The software contained in this device is copyrighted by M/A-COM, Inc. Unpublished rights are reserved under the copyright laws of the United States.
This device is made under license under one or more of the following U.S. Patents: 4,590,473; 4,636,791; 5,148,482; 5,185,796; 5,271,017; 5,377,229;
4,716,407; 4,972,460; 5,502,767; 5,146,497; 5,164,986; 5,185,795.
EDACS is a registered trademark and ProScan, ProSound, and Failsoft are trademarks of M/A-COM, Inc.
RBRC and 1-800-8-BATTERY are registered trademarks of Rechargeable Battery Recycling Corporation.
Cadex is a registered trademark of Buchmann Enterprises, Inc.
five
iTech and iQ
are trademarks, registered trademarks, or service marks of Intelligent Technologies LLC LTD.
All other product and brand names are trademarks, registered trademarks, or service marks of their respective holders.
options/accessories.
ACKNOWLEDGEMENTS
CREDITS
NOTICE!
This manual covers M/A-COM products manufactured and sold by M/A-COM, Inc.
This product conforms to the European Union WEEE Directive 2002/96/EC. Do not dispose of this product in a public landfill. Take it to a
recycling center at the end of its life.
The voice coding technology embodied in this product is protected by intellectual property rights including patent rights, copyrights, and trade secrets of
Digital Voice Systems, Inc. The user of this technology is explicitly prohibited from attempting to decompile, reverse engineer, or disassemble the Object
Code, or in any other way convert the Object Code into human-readable form.
Repairs to this equipment should be made only by an authorized service technician or facility designated by the supplier. Any repairs, alterations, or
substitution of recommended parts made by the user to this equipment not approved by the manufacturer could void the user’s authority to operate the
equipment in addition to the manufacturer’s warranty
This manual is published by M/A-COM, Inc., without any warranty. Improvements and changes to this manual necessitated by typographical errors,
inaccuracies of current information, or improvements to programs and/or equipment, may be made by M/A-COM, Inc., at any time and without notice.
Such changes will be incorporated into new editions of this manual. No part of this manual may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying and recording, for any purpose, without the express written permission of M/A-COM, Inc.
©
Copyright
2003-2006 M/A-COM, Inc. All rights reserved.
2
MM101332V1, Rev. K
NOTICE!
This device is a RF transceiver intended for land mobile radio applications. The device may
have use restrictions, which require that the national authority be contacted for any system
licensing requirements, frequency use, allowable power level, etc.
3
MM101332V1, Rev. K
TABLE OF CONTENTS
1 SAFETY TRAINING INFORMATION...............................................................................................7
1.1 RF EXPOSURE GUIDELINES...................................................................................................7
1.2 ELECTROMAGNETIC INTERFACE/COMPATIBILITY ........................................................8
2 SAFETY SYMBOL CONVENTIONS..................................................................................................9
3 OPERATING TIPS ..............................................................................................................................10
3.1 EFFICIENT RADIO OPERATION...........................................................................................10
3.1.1 Antenna Care and Replacement.....................................................................................10
3.1.2 Electronic Devices.........................................................................................................11
3.1.3 Aircraft...........................................................................................................................11
3.1.4 Electric Blasting Caps....................................................................................................11
3.1.5 Potentially Explosive Atmospheres...............................................................................11
4 MARITIME CHANNELS ...................................................................................................................12
5 BATTERIES .........................................................................................................................................13
5.1 CONDITIONING NIMH BATTERY PACKS ..........................................................................13
5.2 CONDITIONING NICD BATTERY PACKS...........................................................................13
5.3 ADDITIONAL INFORMATION...............................................................................................13
5.4 CHANGING THE BATTERY PACK .......................................................................................14
5.4.1 Removing the Battery Pack...........................................................................................14
5.4.2 Attaching the Battery Pack............................................................................................14
5.5 BATTERY DISPOSAL..............................................................................................................15
Page
6 INTRODUCTION ................................................................................................................................16
6.1 WATER RESISTANCE.............................................................................................................16
7 OPTIONS AND ACCESSORIES........................................................................................................17
8 USER INTERFACE.............................................................................................................................19
8.1 CONTROLS ...............................................................................................................................21
8.1.1 Buttons and Knobs.........................................................................................................21
8.1.2 Keypad (Scan and System Models Only)......................................................................22
8.2 DISPLAY ...................................................................................................................................24
8.2.1 Radio Status Icons.........................................................................................................24
8.2.2 Tri-Color LED...............................................................................................................26
8.2.3 Status Messages.............................................................................................................26
8.2.4 Error Messages..............................................................................................................27
8.3 ALERT TONES..........................................................................................................................27
8.4 UNIVERSAL DEVICE CONNECTOR (UDC).........................................................................28
9 CONVENTIONAL OPERATION......................................................................................................29
9.1 RECEIVING A CALL................................................................................................................29
9.2 SENDING A CALL....................................................................................................................29
10 BASIC OPERATION...........................................................................................................................30
10.1 TURNING ON THE RADIO .....................................................................................................30
10.2 SYSTEM SELECTION..............................................................................................................30
10.3 GROUP/CHANNEL SELECTION............................................................................................31
10.4 MODIFY SCAN LIST................................................................................................................32
10.4.1 System Model................................................................................................................32
4
MM101332V1, Rev. K
10.4.2 Scan Model....................................................................................................................32
10.5 NUISANCE DELETE (SYSTEM MODEL) .............................................................................32
10.6 BACKLIGHT ON/OFF.............................................................................................................. 32
10.7 CONTRAST ADJUST ...............................................................................................................33
10.8 DECLARING AN EMERGENCY.............................................................................................33
10.9 LOCKING/UNLOCKING KEYPAD ........................................................................................33
10.10 HIGH/LOW POWER ADJUSTMENT......................................................................................33
10.10.1 Using the Menu Button..................................................................................................33
10.10.2 Using the Pre-Programmed Option Button....................................................................34
10.11 MENU ........................................................................................................................................34
10.11.1 Menu Item Selection Process.........................................................................................34
10.12 DIGITAL VOICE OPERATION ...............................................................................................37
10.12.1 Clear Mode....................................................................................................................37
10.12.2 Digital Mode..................................................................................................................37
10.12.3 Private Mode..................................................................................................................38
10.12.4 Private Operation...........................................................................................................39
11 TRUNKED OPERATION...................................................................................................................41
11.1 SCANNING TRUNKED GROUPS...........................................................................................41
11.1.1 Turning Scan On and Off ..............................................................................................41
11.1.2 Adding Groups to a Scan List........................................................................................41
11.1.3 Deleting Groups from a Scan List................................................................................. 43
11.2 SCANNING TRUNKED SYSTEMS......................................................................................... 43
11.2.1 Wide Area System Scanning......................................................................................... 43
11.2.2 Priority System Scan......................................................................................................44
11.2.3 ProScan.......................................................................................................................... 44
11.2.4 Menu Selection..............................................................................................................44
11.2.5 Pre-Programmed Keypad Key.......................................................................................44
11.3 EMERGENCY OPERATION....................................................................................................45
11.3.1 Receiving an Emergency Call ....................................................................................... 45
11.3.2 Declaring an Emergency Call ........................................................................................ 45
11.4 INDIVIDUAL CALLS...............................................................................................................45
11.4.1 Receiving and Responding to an Individual Call (Trunked Mode Only)......................45
11.4.2 Sending an Individual Call (Trunked Mode Only)........................................................46
11.4.3 Call Storage Lists...........................................................................................................47
11.5 TELEPHONE INTERCONNECT CALLS................................................................................ 48
11.5.1 Receiving a Telephone Interconnect Call (Trunked Mode Only) .................................48
11.5.2 Sending a Telephone Interconnect Call (Trunked Mode Only).....................................48
11.5.3 Dual-Tone Multi-Frequency: Overdial/Conventional Mode.........................................49
11.6 PROGRAMMABLE ENTRIES.................................................................................................50
11.6.1 Pre-Storing Individual and Telephone Interconnect Calls from the Keypad.................50
11.7 STATUS/MESSAGE OPERATION..........................................................................................51
11.7.1 Status Operation.............................................................................................................51
11.7.2 Message Operation........................................................................................................51
11.7.3 Dynamic Regroup Operation......................................................................................... 51
11.7.4 Emergency Operation....................................................................................................51
11.7.5 Macro Key Operation.................................................................................................... 52
11.8 PORTABLE DATA....................................................................................................................52
11.8.1 Displays......................................................................................................................... 52
11.8.2 DATA OFF Operation................................................................................................... 52
11.8.3 DATA ON Operation....................................................................................................52
5
MM101332V1, Rev. K
11.8.4 Exiting Data Cells..........................................................................................................53
11.8.5 Scan Lockout Mode.......................................................................................................53
11.8.6 Data Lockout Mode.......................................................................................................53
11.9 PAGE (P25 TRUNKING ONLY)..............................................................................................53
12 PROJECT 25 (P25) CONVENTIONAL OPERATION....................................................................55
12.1 GROUP CALLS IN P25 MODE................................................................................................55
12.1.1 Transmitting a Group Call.............................................................................................55
12.1.2 Receiving a Group Call .................................................................................................55
12.2 INDIVIDUAL CALLS IN P25 MODE......................................................................................55
12.2.1 Transmitting an Individual Call.....................................................................................55
12.2.2 Receiving an Individual Call.........................................................................................55
12.3 EMERGENCY GROUP CALLS IN P25 MODE......................................................................56
12.3.1 Declaring an Emergency Group Call.............................................................................56
12.3.2 Receiving an Emergency Group Call............................................................................56
13 RADIO TEXTLINK OPERATION (EDACS ONLY).....................................................................57
14 OPERATION FOLLOWING WATER CONTACT.........................................................................58
14.1 RADIO MICROPHONE ............................................................................................................ 58
14.2 RADIO SPEAKER.....................................................................................................................58
15 IMMERSIBLE P7100IP PREVENTIVE MAINTENANCE .............................................................59
15.1 TECHNICAL ASSISTANCE – IMMERSIBLE P7100IP...........................................................60
16 BATTERY WARRANTY....................................................................................................................61
17 WARRANTY ........................................................................................................................................62
6
1 SAFETY TRAINING INFORMATION
The M/A-COM P7100IP portable radio generates RF electromagnetic energy
during transmit mode. This radio is designed for and classified as
“Occupational Use Only,” meaning it must be used only during the course of
employment by individuals aware of the hazards and the ways to minimize
such hazards. This radio is NOT intended for use by the “General Population”
in an uncontrolled environment.
The P7100IP portable radio has been tested and complies with the FCC RF exposure limits for
“Occupational Use Only.” In addition, this M/A-COM radio complies with the following Standards and
Guidelines with regard to RF energy and electromagnetic energy levels and evaluation of such levels for
exposure to humans:
• FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating Compliance with FCC Guidelines for
Human Exposure to Radio Frequency Electromagnetic Fields.
• American National Standards Institute (C95.1 – 1992), IEEE Standard for Safety Levels with Respect
to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.
• American National Standards Institute (C95.3 – 1992), IEEE Recommended Practice for the
Measurement of Potentially Hazardous Electromagnetic Fields – RF and Microwave.
1.1 RF EXPOSURE GUIDELINES
MM101332V1, Rev. K
To ensure that exposure to RF electromagnetic energy is within the FCC allowable
limits for occupational use, always adhere to the following guidelines:
CAUTION
• DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may
also cause the FCC RF exposure limits to be exceeded. A proper antenna is the antenna supplied with
this radio by M/A-COM or an antenna specifically authorized by M/A-COM for use with this radio.
(Refer to
• DO NOT transmit for more than 50% of total radio use time (“50% duty cycle”). Transmitting more
than 50% of the time can cause FCC RF exposure compliance requirements to be exceeded. The radio
is transmitting when the “TX” indicator appears in the display. The radio will transmit by pressing the
“PTT” (Push-To-Talk) button.
• Always transmit using low power when possible (refer to section “
33). In addition to conserving battery charge, low power can reduce RF exposure.
• ALWAYS use M/A-COM authorized accessories (antennas, batteries, belt clips, speaker/mics, etc).
Use of unauthorized accessories may cause the FCC Occupational/Controlled Exposure RF
compliance requirements to be exceeded. (Refer to
• ALWAYS keep the device and its antenna at least 2 cm (0.8 inches) from the body and at least 5 cm
(2 inches) from the face when transmitting to ensure FCC RF exposure compliance requirements are
not exceeded. This radio has been tested for RF exposure compliance at the distances listed in
1-1
recommends you hold the microphone at least 5 cm (2 inches) from your mouth, and slightly off to
one side.
Table 7-1: Options and Accessories.)
HIGH/LOW POWER A” on page
Table 7-1: Options and Accessories.)
Table
. However, to provide the best sound quality to the recipients of your transmission, M/A-COM
7
MM101332V1, Rev. K
Table 1-1: RF Exposure Compliance Testing Distances
RADIO FREQUENCY
800 MHz 1.1 cm 2.5 cm
VHF (136-174 MHz) 1.1 cm 2.5 cm
UHF-H (450-512 MHz) 1.1 cm 2.5 cm
UHF-L (378-430 MHz) 1.1 cm 2.5 cm
TESTED DISTANCES
(worst case scenario)
Body Face
The information in this section provides the information needed to make the user aware of a RF exposure,
and what to do to assure that this radio operates within the FCC RF exposure limits of this radio
1.2 ELECTROMAGNETIC INTERFACE/COMPATIBILITY
During transmissions, this M/A-COM radio generates RF energy that can possibly cause interference with
other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to
do so. DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as
hospitals, aircraft, and blasting sites.
.
8
2 SAFETY SYMBOL CONVENTIONS
The following conventions are used to alert the user to general safety precautions that must be observed
during all phases of operation, service, and repair of this product. Failure to comply with these
precautions or with specific warnings elsewhere violates safety standards of design, manufacture, and
intended use of the product. M/A-COM, Inc. assumes no liability for the customer’s failure to comply
with these standards.
The WARNING symbol calls attention to a procedure, practice, or the like,
which, if not correctly performed or adhered to, could result in personal injury.
Do not proceed beyond a WARNING symbol until the conditions identified are
fully understood or met.
The CAUTION symbol calls attention to an operating procedure, practice, or the like,
which, if not performed correctly or adhered to, could result in a risk of danger,
CAUTION
damage to the equipment, or severely degrade the equipment performance.
MM101332V1, Rev. K
The NOTE symbol calls attention to supplemental information, which may improve
system performance or clarify a process or procedure.
The ESD symbol calls attention to procedures, practices, or the like, which could
expose equipment to the effects of Electro-Static Discharge. Proper precautions must
be taken to prevent ESD when handling circuit modules.
WARNING - The electrical hazard symbol indicates there is an electrical hazard
present.
9
MM101332V1, Rev. K
3 OPERATING TIPS
Antenna location and condition are important when operating a portable radio. Operating the radio in low
lying areas or terrain, under power lines or bridges, inside of a vehicle or in a metal framed building can
severely reduce the range of the unit. Mountains can also reduce the range of the unit.
In areas where transmission or reception is poor, some improvement may be obtained by ensuring that the
antenna is vertical. Moving a few yards in another direction or moving to a higher elevation may also
improve communications. Vehicular operation can be aided with the use of an externally mounted
antenna.
Battery condition is another important factor in the trouble free operation of a portable radio. Always
properly charge the batteries.
3.1 EFFICIENT RADIO OPERATION
For optimum audio clarity at the receiving radio(s), hold the portable radio approximately three inches
from your mouth and speak into the microphone at a normal voice level.
Keep the antenna in a vertical position when receiving or transmitting a message.
Do not hold the antenna when the radio is powered on.
Do NOT hold onto the antenna when the radio is powered on.
3.1.1 Antenna Care and Replacement
Always keep the antenna at least 0.4 inches (1.1 cm.) away from the body and 1
inch (2.5 cm.) from the face when transmitting to ensure FCC RF exposure
compliance requirements are not exceeded.
Do not use the portable radio with a damaged or missing antenna. A minor burn
may result if a damaged antenna comes into contact with the skin. Replace a
damaged antenna immediately. Operating a portable radio with the antenna
missing could cause personal injury, damage the radio, and may violate FCC
regulations.
10
MM101332V1, Rev. K
Use only the supplied or approved antenna. Use of unauthorized antennas,
modifications or attachments could cause damage to the radio unit and may
violate FCC regulations. (Refer to Table 7-1: Options and Accessories.)
3.1.2 Electronic Devices
RF energy from portable radios may affect some electronic equipment. Most modern
electronic equipment in cars, hospitals, homes, etc. are shielded from RF energy.
However, in areas in which you are instructed to turn off two-way radio equipment,
CAUTION
always observe the rules. If in doubt, turn it off!
3.1.3 Aircraft
Always turn off a portable radio before boarding any aircraft!
• Use it on the ground only with crew permission.
• DO NOT use while in-flight!!
3.1.4 Electric Blasting Caps
To prevent accidental detonation of electric blasting caps, DO NOT use two-way
radios within 1000 feet of blasting operations. Always obey the "Turn Off TwoWay Radios" signs posted where electric blasting caps are being used. (OSHA
Standard: 1926.900)
3.1.5 Potentially Explosive Atmospheres
Areas with potentially explosive atmospheres are often, but not always, clearly
marked. These may be fuelling areas, such as gas stations, fuel or chemical
transfer or storage facilities, and areas where the air contains chemicals or
particles, such as grain, dust, or metal powders.
Sparks in such areas could cause an explosion or fire resulting in bodily injury
or even death.
Turn OFF two-way radios when in any area with a potentially explosive
atmosphere. It is rare, but not impossible that a radio or its accessories could
generate sparks.
11
MM101332V1, Rev. K
4 MARITIME CHANNELS
As part of FCC Equipment Authorization Part 80 licensing, a maritime frequency usage plan has been
included in this manual for reference.
The antenna connector (between antenna and radio) is a nominal 50Ω impedance.
12
5 BATTERIES
The P7100 series portable radios use rechargeable, recyclable Nickel Cadmium (NiCd) or Nickel Metal
Hydride (NiMH) batteries. Please follow the directions below to maximize the useful life of each type of
battery.
If the battery is ruptured or is leaking electrolyte that results in skin or eye
contact with the electrolyte, immediately flush the affected area with water.
If the battery electrolyte gets in the eyes, flush with water for 1 5 minutes an d
consult a physician immediately.
5.1 CONDITIONING NIMH BATTERY PACKS
Condition a new NiMH battery before putting it into use. This also applies to rechargeable NiMH
batteries that have been stored for long periods (weeks, months, or longer). Conditioning requires fully
charging and fully discharging the battery three (3) times using a “battery analyzer/conditioner/charger.”
M/A-COM recommends either the Cadex® C7400 or the Intelligent Technologies Co. BC3506QP-5
iTECH® iQfive® battery conditioners, purchased directly from M/A-COM. These units condition a
battery pack by automatically charging and discharging (cycling) the battery.
MM101332V1, Rev. K
Failure to properly condition NiMH battery packs before initial use will result in
shortened performance by the battery.
CAUTION
5.2 CONDITIONING NICD BATTERY PACKS
A new NiCD battery does not require conditioning before use. Periodically condition NiCD batteries to
avoid the memory effect. If a NiCD battery is repeatedly charged and not fully discharged, the result is
lower voltage and lower capacity. Fortunately, both voltage and capacity are restored through battery
conditioning.
Always use M/A-COM authorized chargers and conditioners. Use of
unauthorized chargers and conditioners may void the warranty.
CAUTION
5.3 ADDITIONAL INFORMATION
For more information regarding the proper care of portable radio batteries or establishing a battery
maintenance program, refer to ECR-7367 which may be ordered by calling toll free 1-800-368-3277, then
select option 7.
13
MM101332V1, Rev. K
5.4 CHANGING THE BATTERY PACK
5.4.1 Removing the Battery Pack
Make sure the power to the radio is turned OFF.
1. Press the latch at the bottom of the battery pack.
2. Lift the battery pack from the bottom.
3. Remove the battery pack from the radio.
Figure 5-1: Removing the Battery Pack
5.4.2 Attaching the Battery Pack
Make sure the power to the radio is turned OFF.
1. Align the tab on the top of the battery pack with the slot at the top of the battery cavity.
2. Push the battery pack down to attach the battery to the radio.
3. Verify that the battery pack is properly latched to the radio.
Figure 5-2: Attaching the Battery Pack
14
5.5 BATTERY DISPOSAL
In no instance should a battery be incinerated. Disposing of a battery by burning
will cause an explosion.
MM101332V1, Rev. K
CAUTION
RECHARGEABLE BATTERY PACK DISPOSAL – The product you have
purchased contains a rechargeable battery. The battery is recyclable. At the end
of its useful life, under various state and local laws, it may be illegal to dispose of
this battery into the municipal waste stream. Check with your local solid waste
officials for details in your area for recycling options or proper disposal.
Canadian and U.S. users may call Toll Free 1-800-8-BATTERY® for information
and/or procedures for returning rechargeable batteries in your locality.
15
MM101332V1, Rev. K
6 INTRODUCTION
This manual describes how to use the P7100IP series portable radio. The P7100IP series radio is available
without a front mounted keypad (P7130 – Select model), with a 6-button front mounted keypad (P7150 –
Scan model) and with a DTMF front mounted keypad (P7170 – System model). The P7100
are synthesized, microprocessor-based, high performance portable FM radios providing reliable two-way
communications in the Enhanced Digital Access Communications Systems (EDACS
environments as well as conventional communications systems.
In P25 Trunked and EDACS modes, the user selects a communications system and group. In these modes,
channel selection is transparent to the user and is controlled via digital communication with the system
controller. This provides advanced programmable features and fast access to communication channels.
In the conventional mode, the user selects a channel and communicates directly on that channel. In this
mode, a system refers to a set of channels. A channel is a transmit/receive radio frequency pair.
The exact operation of the radio will depend on the operating mode, the radio’s programming, and the
particular radio system. Most features described in this manual can be enabled through programming.
Consult the particular features programmed into the P7100
IP
series radios
®
) and P25 trunking
IP
.
For further detail about features and operation refer to the appropriate maintenance manual or contact the
system administrator.
6.1 WATER RESISTANCE
The P7100IP series portable radios operate reliably even under adverse conditions. These radios meet
MIL-STD-810F specifications for driven rain, humidity, and salt fog.
16
7 OPTIONS AND ACCESSORIES
Table 7-1 lists the Options and Accessories tested for use with the P7100IP series portable radios. Items
for use with a specific band split or part number are noted.
Refer to the maintenance manual or to M/A-COM’s Products and Services Catalog for a complete list of
options and accessories, including those items that do not adversely affect the RF energy exposure.
Always use M/A-COM authorized accessories (antennas, batteries, belt clips,
speaker/mics, etc). Use of unauthorized accessories may cause the FCC
Occupational/Controlled Exposure RF compliance requirements to be exceeded.
(Refer to Table 7-1: Options and Accessories.)
Always use the correct options and accessories (battery, antenna, speaker/mic, etc.)
for the radio. Immersion rated options must be used with an immersion rated radio.
Intrinsically safe options must be used with intrinsically safe radios. (Refer to Table
CAUTION
7-1: Options and Accessories.)
MM101332V1, Rev. K
Table 7-1: Options and Accessories
DESCRIPTION PART NUMBER
Antennas
Antenna, Helical Coil (136-151 MHz) KRE 101 1219/1
Antenna, Helical Coil (150-162 MHz) KRE 101 1219/2
Antenna, Helical Coil (162-174 MHz) KRE 101 1219/3
Antenna, Helical Coil (150-174 MHz) KRE 101 1219/21
Antenna, Helical Coil (378-403 MHz) KRE 101 1219/9
Antenna, Helical Coil (403-430 MHz) KRE 101 1219/10
Antenna, Quarter Wave (378-430 MHz) KRE 101 1223/10
Antenna, Helical Coil (450-470 MHz) KRE 101 1219/12
Antenna, Helical Coil (470-512 MHz) KRE 101 1219/13
Antenna, Quarter Wave (450-512 MHz) KRE 101 1223/12
High Gain Antenna (800 MHz) KRE 101 1506/1
Whip Antenna, Quarter Wave (800 MHz) KRE 101 1506/2
Whip Antenna, Quarter Wave (800 MHz) KRE 101 1223/01
Batteries (Immersion-Rated)
7.5V Nickel Cadmium (NiCd) Battery BKB 191 210/33
7.5V Nickel Metal Hydride (NiMH) Battery BKB 191 210/34
7.5V NiCd Battery-Intrinsically Safe <IS> BKB 191 210/35
7.5V NiMH Battery-Intrinsically Safe <IS> BKB 191 210/36
17
MM101332V1, Rev. K
7.5V NiCd Battery BKB 191 210/43
7.5V NiMH Battery BKB 191 210/44
Speaker Mic <IS> KRY 101 1617/183
Speaker Mic Antenna Version Plus <IS> KRY 101 1617/184
Speaker Mic, Charger Compatible <IS> KRY 101 1617/185
Speaker Mic, Ant. Version, Charger Comp. <IS> KRY 101 1617/186
Speaker Mic, Immersible <IS> KRY 101 1617/283
Speaker Mic, Ant. Version, Immersible <IS> KRY 101 1617/284
Speaker Mic, Ant. Version, Immersible, Charger Comp. <IS> KRY 101 1617/287
Speaker Mic, Ruggedized <IS> KRY 101 1617/383
Speaker Mic, Antenna Version, Ruggedized KRY 101 1617/384
Speaker Mic, Ruggedized, Charger Comp., <IS> KRY 101 1617/385
Speaker Mic, Ant. Version, Ruggedized, Vehicular Charger Comp
<IS>
Metal Belt Clip KRY 101 1647/1
Belt Loop with Swivel KRY 101 1609/1
Swivel Mount Clip (part of KRY 101 1639 and 1648) KRY 101 1608/2
Leather Case with Swivel & Belt Loop KRY 101 1639/4
Nylon Case (Black) with Swivel KRY 101 1648/1
Nylon Case (Orange) with Swivel KRY 101 1649/1
Nylon T-Strap KRY 101 1656/1
Earpiece Kit for Speaker Mic <IS> LS103239V1
Speaker Mic, Industrial OT-V2-10121
Speaker Mic, Industrial PLUS OT-V2-10122
Ultra-Lite Headset with Inline PTT OT-V4-10314
Liteweight Headset with Single Speaker OT-V4-10315
Over-the-Head Headset OT-V4-10316
Behind-the-Head Headset OT-V4-10317
Earphone Kit, Black OT-V1-10520
Earphone Kit, Beige OT-V1-10521
Palm Microphone, 2-wire, Black OT-V1-10522
Palm Microphone, 2-wire, Beige OT-V1-10523
3-Wire Mini-Lapel (Beige) OT-V1-10524
3-Wire Mini-Lapel (Black) OT-V1-10525
The carrying accessories and antennas listed above can be used with Intrinsically Safe radios.
DESCRIPTION PART NUMBER
Batteries (Wind Driven Rain)
Miscellaneous Accessories
KRY 101 1617/387
18
8 USER INTERFACE
Figure 8-1: Top View
MM101332V1, Rev. K
Figure 8-2: Side View
19
MM101332V1, Rev. K
Figure 8-3: System Model
20
Figure 8-4: Scan Model
Loading...