Tyco IPX200 User Manual
InfoProx™ Exit IPX200/210
Proximity/Smartcard Reader
FEATURES
OVERVIEW
The InfoProx™ Exit is a compact reader designed to be used in conjunction with the
range of InfoProx and EtherProx card readers. Designed for simple installation and easy
use, InfoProx Exit is ideal for any area where IN/OUT control is required.
Available in both traditional 125 kHz proximity (IPX200) and MiFare smart card
(IPX210) options, the reader, LCD display, LEDs and keypad are housed in a single
polycarbonate enclosure. Despite its small size, the InfoProx Exit can display messages
of up to 32 characters, which provides a system administrator or end user with
immediate information about a transaction event such as ‘Access Denied’.
The InfoProx Exit door control unit has no functionality unless used with the range of
InfoProx or EtherProx card readers for IN/OUT control.
The InfoProx Exit door control unit provides additional free inputs and one output,
which are controlled, from the master reader. The keypad is used when PIN validation is
required, offering additional security.
• Exit reader for use with the
InfoProx and EtherProx card
readers
• Available in both 125 kHz
proximity (IPX200) and MiFare
smart card (IPX210) technology
options
• In-built database for off-line
card validation
• Three LED indicators to visually
confirm or deny entry
• Suitable for indoor or outdoor
installation
• Backlit LCD display shows easy to
understand messages for the user
• Keypad for added PIN security
• 4 inputs available for general
purpose use
InfoProx™ Exit IPX200/210
www.cemsys.com
CEM/B/135 Rev A
PRODUCT HIGHLIGHTS
Door Control Unit Installation
The enclosure is designed to mount directly onto a standard
UK or European (French) electrical containment box (American
versions are provided with a compact adapter plate), meaning
that standard conduit and fittings may be used.
Card Technology
The InfoProx Exit reader (IPX200) uses 125 kHz proximity
technology under license from HID Corporation.
A 13.5 MHz technology (IPX210) option of the reader is
available enabling the InfoProx to read the unique ID of MiFare
smart cards (ISO14443A). The following cards are supported:
Type of Card Read Range (IPX200)
ISOProx® II Card 76mm (3.0in)
ProxCard™ Plus Card 38mm (1.5in)
TECHNICAL SPECIFICATIONS
PHYSICAL
Size 86 x 86 x 22mm (3.4” x 3.4” x 0.87”)
Weight 222.7g (7.9oz) with connectors
Housing Flame retardant polycarbonate
containing fully encapsulated
electronics.
Colour Dark Grey
Power
- Voltage 9 – 15Vdc
- Current
Consumption 140mA (passive), 250mA (peak)
Environmental
- Temperature -10º to 50ºC (14º to 122ºF)
- Humidity 95% non condensing
LED Indicators Three high intensity LED indicators red,
amber and green
LCD Indicators Two line by 16 character supertwist LCD
with backlight
Keypad 12 character, standard layout, tactile
response keypad.
ProxCard® II Card 76mm (3.0in)
ProxKey™ II Fob 25mm (1.0in)
Kantech 31bit Card 38mm (1.5in)
Type of Card Read Range (IPX210)
MiFare Card 30mm (1.18in)
Built-in Diagnostics
Allows testing of LED indicators, LCD display, read head, inputs,
relay, network communications, keypad and database size.
System Compatibility
The reader can be used with AC2000 or webEntry access control
systems.
Configuration Operational parameters are downloaded
from associated online reader. Some
configuration setting can also be set using
the keypad.
COMMUNICATION INTERFACE
To IN Reader RS485 multidrop cable runs using copper
wire with maximum length of 1.2km
without repeater
- Connection 2 part screw terminals
PRODUCT CODES
InfoProx Exit IPX200 (125 kHz Proximity)
SPASS-IPX-200-B InfoProx Exit
SPASS-IPX-200-A InfoProx Exit (US Backplate)
InfoProx Exit IPX210 (MiFare CSN)
SPASS-IPX-210-B InfoProx Exit
SPASS-IPX-210-A InfoProx Exit (US Backplate)
FUNCTIONALITY
Inputs Four analog inputs (Transguard protected)
(General purpose use)
Product specifications and availability is subject to change without notice. Certain product names mentioned herein may be trade names
and/or registered trademarks of their companies.
CEM Systems Ltd Unit 4 Ravenhill Business Park Ravenhill Road Belfast BT6 8AW Northern Ireland
Tel: +44 (0)28 9045 6767 Fax: +44 (0)28 9045 4535 email: cem.sales@tycoint.com
www.cemsys.com
Loading...