Tyco IPL200, IPL210 User Manual

InfoProx™ Lite IPL200/IPL210

Proximity/Smartcard Reader

FEATURES

OVERVIEW

The InfoProx™ Lite is a lower cost proximity card reader that is designed to operate as
a card reading device on a CEM access control system where offline card validation is
not required.

Available in both traditional 125 kHz proximity (IPL200) amd MiFare smart card
(IPL210) options, the reader, LCD display, LEDs and keypad are housed in a single
polycarbonate enclosure. Despite its small size, the reader has a 32 character backlit
LCD to display messages, providing system administrators and users with immediate
plain text descriptions of events such as ‘Access Denied’. The reader provides its own
anti-tamper protection and interfaces directly to the door furniture and 12V lock power
supply eliminating the need for additional controllers, I/O (Input/Output) units and
greatly reducing installation costs.

The InfoProx card reader has four analogue inputs and one output allowing it to control
local door strikes or other equipment without the need for a separate door controller.
The keypad also offers additional security when PIN validation is required. An InfoProx
Exit reader is also supported for IN/OUT control.

• Available in both 125 kHz
proximity (IPL200) and MiFare
smart card (IPL210) technology
options

• Three LED indicators to visually
confirm or deny entry

• Suitable for indoor or outdoor
installation

• Backlit LCD display shows easy to
understand messages for the user

• Keypad for added PIN security

• Supports Entry/Exit configuration
for IN/OUT control

• Interfaces directly with door
furniture and lock power supply –
no need for additional controllers
or I/O units

InfoProx™ Lite IPL200/IPL210

www.cemsys.com

• 4 inputs to monitor alarms such
as door held/forced conditions
and secure side exit push button
operation

CEM/B/138

PRODUCT HIGHLIGHTS

Door Control Unit Installation

The enclosure is designed to mount directly onto a standard
UK or European (French) electrical containment box (American
versions are provided with a compact adapter plate), meaning
that standard conduit and fittings may be used.

Remote Programming

Operational parameters, e.g. door open time, are downloaded
to the reader from the host computer. Additionally some
parameters can also be configured via the keypad. InfoProx
readers can even be remotely upgraded, eliminating the need to
physically replace firmware, giving increased system flexibility
and efficiency.

Card Technology

The InfoProx (IPL200) reader uses 125 kHz proximity
technology under license from HID Corporation.
A 13.5 MHz technology (IPL210) option of the reader is
available enabling the InfoProx to read the unique ID of MiFare

smart cards (ISO14443A). The following cards are supported:

Type of Card Read Range (IPL200)
ISOProx® II Card 76mm (3.0in)
ProxCard™ Plus Card 38mm (1.5in)
ProxCard® II Card 76mm (3.0in)
ProxKey™ II Fob 25mm (1.0in)
Kantech 31bit Card 38mm (1.5in)

Type of Card Read Range (IPL210)
MiFare Card 30mm (1.18in)

Built-in Diagnostics

Allows testing of LED indicators, LCD display, read head, inputs,
relay, network communications and keypad.

System Compatibility

The reader can be used with AC2000 or webEntry access control
systems.

TECHNICAL SPECIFICATIONS

PHYSICAL

Size 86 x 86 x 22mm (3.4” x 3.4” x 0.87”)
Weight 222.7g (7.9oz) with connectors
Housing Flame retardant polycarbonate containing
fully encapsulated electronics.
Colour Dark Grey
Power

- Voltage 9 – 15Vdc

- Current
Consumption 140mA (passive), 250mA (peak)
Backup Battery Rechargable Lithium battery giving
database backup for over 3 months.
Environmental

- Temperature -10º to 50ºC (14º to 122ºF)

- Humidity 95% non condensing
LED Indicators Three high intensity LED indicators red,
amber and green
LCD Indicators Two line by 16 character supertwist LCD
with backlight
Keypad 12 character, standard layout, tactile
response keypad.

FUNCTIONALITY

Outputs Two current limited open collector outputs
(Door Lock, Unused – for future use)

Configuration Operational parameters are downloaded
from host computer. Some configuration
setting can also be set using the keypad.

COMMUNICATION INTERFACE

To Exit Reader RS485 multidrop cable runs using copper
wire with maximum length of 1.2km
without repeater

- Connection 2 part screw terminals
To System Host RS485 multidrop cable runs using copper
wire with maximum length of 1.2km
without repeater

- Connection 2 part screw terminals

PRODUCT CODES

InfoProx Lite IPL200 (125 kHz Proximity)
SPASS-IPL-200-B InfoProx Lite
SPASS-IPL-200-A InfoProx Lite (US Backplate)

Inputs Four analog inputs (Transguard protected)
(Door Position, Lock Position, REX Button,
Spare)

Product specifications and availability is subject to change without notice. Certain product names mentioned herein may be trade names
and/or registered trademarks of their companies.

CEM Systems Ltd Unit 4 Ravenhill Business Park Ravenhill Road Belfast BT6 8AW Northern Ireland
Tel: [phone] Fax: [phone] email: [e-mail]

InfoProx Lite IPL210 (MiFare CSN)
SPASS-IPL-210-B InfoProx Lite
SPASS-IPL-210-A InfoProx Lite (US Backplate)

www.cemsys.com