Two Brothers Racing Harley Davidson FL User Manual
1. Remove OEM air lter assembly.
Installation Instructions
Harley Davidson
FL Touring
Part # 034-387-01-V
Qty. Description Part Number
1 Comp-V Assembly 034-387-01-V
1 V-Stack 017C-103
1 Gasket 017C-122
2 Banjo Bolt 017C-117
2 Spacers 017C-104
6 O-Ring 017C-111
1 Thread Locker 031-P09178
1 Anti-Seize 031-P09175
1 Zip-Tie 005-ZT458B
2. Remove plug from back of OEM backing plate and zip-tie out of way.
4. Install one o-ring onto each banjo bolt.
5. Install one o-ring onto each end of the oil-channel spacer.
6. Install gasket onto back of backing plate (this may need to be ipped and
turned to nd the right bolt pattern).
3. Disassemble Comp-V to backing plate.
7. Put banjo bolts through backing plate and spacers. Apply loc-tite to banjo
bolt threads.
8. When installing backing plate to throttle body be sure to tighten socket
head screws and banjo bolts evenly 1/4 turn at a time to ensure no
binding. (Socket head screws are self locking and some slight resistance
is normal when tightening.)
Installation Instructions
Harley Davidson
FL Touring
Part # 034-387-01-V
Qty. Description Part Number
1 Comp-V Assembly 034-387-01-V
1 V-Stack 017C-103
1 Gasket 017C-122
2 Banjo Bolt 017C-117
2 Spacers 017C-104
6 O-Ring 017C-111
1 Thread Locker 031-P09178
1 Anti-Seize 031-P09175
1 Zip-Tie 005-ZT458B
9. Install TBR air lter and face plate. Tighten the ve socket head cap
screws.
10. Apply anti-seize to threads of plug cap or v-stack and install hand tight.
Care & Cleaning
Care & Cleaning
Keep system free of dirt and mo isture. Store in a coo l, dry p lace. Make sure
vehicle is completely coo l before ma intenanc e.
Warranty Information
Two Brothers Racing products are intended for closed course competition purposes
only, and therefore are sold “as is” without warranty. Two Brothers Racing specically
disclaims any warranties of merchantability or tness for a particular purpose and
disclaims all responsibility for consequential and incidental damages or any other
losses arising from the use of these products or parts. Not tested for use with OEM or
aftermarket accessories.
IMPORTANT - PLEASE READ CAREFULLY
Two Brothers Racing products are intended for closed course
competition purposes only.
We recommend that this performance part be installed by a qualied
motorcycle technician. If you have any doubts as to your ability to
install this performance part, please consult with your local motorcycle
dealer. Read all instructions rst before starting installation. Make
sure the motorcycle and exhaust system are completely cool before
starting the installation. Also, make sure the bike is secure on a center
stand or ideally a service lift during installation. Be sure to save all
stock components for possible use later.
Loading...