Two Brothers Racing Dealer Floor Display User Manual

Installation Instructions

1. Open box 1 and 2 and confirm you have all the parts
needed to assembly your display.

4. Install center support and secure in place with 8x55mm
bolt into lower stand plate and 8x45mm bolt between
back support and center support.

TBR

Dealer Display

Part # 0 05-D3C

V.A.L.E.

V a r i a b l e a x i s l o c k i n g e x h a u s t

TM

5. Install upper back support onto lower back suport and
secure with 1 8x45mm and 2 8x10mm bolts in sides.

2. Locate lower stand retainer and plate, set lowerstand
plate over retainer and line-up mounting bolts.

3. Set lower back support on lower stand plate and mount
with 2 8x55mm bolts.

Installation Instructions

V.A.L.E.

V a r i a b l e a x i s l o c k i n g e x h a u s t

TM

TBR

Dealer Display

Part # 0 05-D3C

6. Install TBR name plate using 8x10mm bolt.

8. Install rack and pegs.

9. Install 4 19” exhaust box supports.

10. Install 22” shelves.

11. Install muffler.

7. Install exhaust display using the 2 8x15mm bolts/
nuts.

12. Install leveling feet.