Twinhead MPCT0168 User Manual

Information about RFID reader (Optional)

The RFID reader is a compact contactless reader and writer which supports
Mifare® cards and ISO14443A & ISO 14443B & ISO15693.

How to use the RFID reader:

Please click on [Twinhead Demo] program shown on Windows program
menu to execute RFID reader software.

Then press button on handle to turn on built-in RFID reader, and it will be
ready to read. RFID reader will be power down after software closed.

(button on handle)

28

Allowable position to read the tag:

Correct position

Wrong position

The maximum reading distances for different protocol:

Protocol Distance

ISO 15693 7cm

ISO 14443A 6cm

ISO 14443B 3cm

29

Information about Camera function (Optional)

The camera lens is on the back of the Tablet PC..

Features:

 2 mega pixels resolution (1600 x 1200)
 Auto focus: 7cm~infinity

How to use the camera:

1. Press the Camera button to activate
the camera and open the viewfinder.

2. Press the Camera button again to
take a picture.

30

Communication Components

This system includes built-in Wireless LAN, Bluetooth and 3G function:

Built-in Wireless Local Area Network

The built-in Wireless Local Area Network (WLAN) interface card can
provide a quick access without using cables for the connection to the
network equipments. The interface card adopts the IEEE 802.11 a/b/g/n
protocol and uses the 2.4/5 GHz ISM electric wave frequency band as
the transmission interface to set up the communications between the
host computer and other computers.
The way of processing communications through the WLAN interface
card is the same as that through Ethernet interface card. The
“Configuration Tool” is a Window application program. If users have a
computer equipped with the WLAN interface card, then users can use
it to set up the interface card and show the current configuration and
status.

Note: Contact your distributor for the information of upgrading the

wireless local area network.

31

Information about 3G function (Optional)

Note: The system does not support 3G Voice features.

The system provides 3G function
(optional), please remove the SIM card cover.
Then insert 3G SIM card into the slot.

Attention: WLAN function will be auto

turn-off when 3G function is on.

Please click on [3G Watcher] program
shown on Desktop to turn on 3G function.

Please follow 3G Watcher Help Topics/

Wireless Data Connections/Manage

profiles to create a profile first.

After all settings are completed, click
Connect to access Internet.

User will find
The indicator shows the received signal
strength in dBm up to a maximum of five
bars..

Please click 3G Watcher Tools/Turn
Radio Off to stop connection.

on Windows task bar.

32

Information about Bluetooth

A Bluetooth wireless technology is the ability to simultaneously handle both
data and voice transmissions. This enables users to enjoy a variety of
solutions such as hands-free headset for voice calls, printing and fax
capabilities, and synchronizing PDA, laptop, and mobile phone applications.

Please press
User could check Bluetooth connection status of indicator on Windows task

bar.

Double click Bluetooth indicator or
application
program.

: Bluetooth disconnection : Bluetooth connection

hot key to turn on Bluetooth function.

on Desktop to turn on

33

CChhaapptteerr 33

Maakkiinngg

M

Coonnnneeccttiioonnss

C

Making Connections

Right Side Connectors

2

1. DC-in Jack

Connect the power plug of the AC adapter to this jack.

2. Docking Station connector

The Connector is reserved for specific purpose which is used to
connect to customer’s device.

33

1

CChhaapptteerr 44

PPoowweerr MMaannaaggeemmeenntt

Power Management

Checking the Battery Level

You can check the remaining battery power in the Windows® battery status
indicator located at the lower right-hand corner of the task tray. The Battery
Status icon only appears in the task tray while the unit is running on the
battery power but not while the unit is running off an external power source
through the AC adaptor.

Battery Power Indicator

Enter Monitoring Battery Power

There are two ways to
monitor how much power the
battery has left.

1. Click Start / Settings /
Control Panel / Power
Options then click Power
Meter.

2. Moving the cursor to the
battery icon on the
taskbar is the simplest
way to check on battery
power status.

If you do not see the battery icon, enable it in Start / Settings /
Control Panel / Power Options. Choose the Advanced tab and click
“Always show icon on the taskbar.”

Low Battery Alarms

How your Tablet PC responds to a low battery condition is set under
Start / Settings / Control Panel / Power Options / Alarms.

Two different power alarms can be enabled or disabled: the Low
Battery Alarm, and the Critical Battery Alarm.

Warning: When battery power is low, the battery

indicator will flash red, and the alarm will
display a warning on your screen. Take immediate
action, such as saving files or connecting to the
AC adapter, or data may be lost.

39