Turck BCS-DN-CSG22 Data Sheet

BCS-DN-CSG22

Conduit Adapter I/O Module

This conduit cover I/O station provides discrete input and outputchannels
on DeviceNet™. The conduit adapter attaches to a standard conduit
body with the DeviceNet network connections on the back side of the
station (inside theconduit body) andthe I/O connectionson the top side of
the station.

The BCS-DN-CSG22 supports explicit messaging, poll, COS and cyclic I/O
messages. These connections are established through UCMM or
pre-defined master/slave connection.

** Gasket and mounting hardware included (Form 8: 10-24 screws; Mark
9: 8-32 screws).

Dimensions

Electrical

•

Operating voltage: 11-26 VDC from DeviceNet

•

Operating Current: <50 mA from DeviceNet

•

Output Current: 0.5 A

Mechanical

•

Operating Temperature: -25°...+70°C

•

Protection: IP 67

Female eurofast

®

Open Connector

12345

1 = V+
2 = Output
3 = V­4 = Input
5 = N/C

5 = V+
4 = CAN_H
3 = SH
2 = CAN_L
1 = V-

Conduit Bodies

CROUSE - HINDS Hub Size = 3/4

0

Shape Style Part

Form 8

Mark 9

Form 8

Mark 9

Form 8

Mark 9

Form 8

Mark 9

Number

C28

C29

LB28

LB29

LL28

LL29

LR28

LR29

TURCK Inc. 10240384 Rev 1.4 07/06

TURCK
BCS-DN-CSG22

Module Specifications

Supply Voltage

Bus Power
Internal Current Consumption

Input Circuits (2) PNP 3-wire sensors or dry contacts

Input Voltage (V+)
Input Short-Circuit (V+)
Input Signal Current (Input)

Input Delay

Output Circuits (2) DC actuators

Output Voltage
Output Load Current
Maximum Switching Frequency

Housing Open Frame

Enclosure
Operating Temperature

11-26 VDC
≤50 mA plus sum of sensor and output currents (from bus power)

11-26 VDC (from bus power)
700 mA (total, short-circuit protected)
OFF 0-4 V, 0.05 mA
ON 0.5 x Vbus, 1.1 mA-2.2 mA ( at Vbus = 24 VDC)

2.5 ms

18-26 VDC (from bus power)

0.5 A each (from bus power)
100 Hz

IP 67

-25° to 70°C (-13° to 158°F)

I/O Data Mapping

Product Code: F1006

Input
Data

Output
Data

TURCK Inc. 10240384 Rev 1.4 07/06

Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0

0 IGS - - - OS-1 OS-0 I-1 I-0

Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0

0 - - - - - - O-1 O-0

Abbreviations

I = Input Data (0= OFF, 1= ON)
O = Output Data (0=OFF, 1=ON)
OS = Output Status (0=Working, 1=Fault)
IGS = Input Group Status (0=Working, 1=Fault)