Turbosound TCS115-FP, TCS-FK1, TCS122-FP, TCS-FK1-WH, TCS152-FP-WH Quick Start Guide

...
TCS Brackets
TCS62-SB (WH), TCS-FK1 (WH), TCS-FK2 (WH), TCS-FK3 (WH), TCS115-FP (WH), TCS122-FP (WH), TCS152-FP (WH)
2
TCS Brackets Quick Start Guide
3
MUSIC Group accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifi cations, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. MIDAS, KLARK TEKNIK, TURBOSOUND, BEHRINGER, BUGERA and DDA are trademarks or registered trademarks of MUSIC Group IP Ltd. © MUSIC Group IP Ltd. 2014 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding MUSIC Group’s Limited Warranty, please see complete details online at music-group.com/warranty.
NEGACIÓN LEGAL
MUSIC Group no admite ningún tipo de responsabilidad por cualquier daño o pérdida que pudiera sufrir cualquier persona por confi ar total o parcialmente en la descripciones, fotografías o afi rmaciones contenidas en este documento. Las especifi caciones técnicas, imágenes y otras informaciones contenidas en este documento están sujetas a modifi caciones sin previo aviso. Todas las marcas comerciales que aparecen aquí son propiedad de sus respectivos dueños. MIDAS, KLARK TEKNIK, TURBOSOUND, BEHRINGER, BUGERA y DDA son marcas comerciales o marcas registradas de MUSIC Group IP Ltd. © MUSIC Group IP Ltd. 2014 Reservados todos los derechos.
GARANTÍA LIMITADA
Si quiere conocer los detalles y condiciones aplicables de la garantía así como información adicional sobre la Garantía limitada de MUSIC group, consulte online toda la información en la web music-group.com/warranty.
DÉNI LÉGAL
MUSIC Group ne peut être tenu pour responsable pour toute perte pouvant être subie par toute personne se fi ant en partie ou en totalité à toute description, photographie ou affi rmation contenue dans ce document. Les caractéristiques, l’apparence et d’autres informations peuvent faire l’objet de modifi cations sans notifi cation. Toutes les marques appartiennent à leurs propriétaires respectifs. MIDAS, KLARK TEKNIK, TURBOSOUND, BEHRINGER, BUGERA et DDA sont des marques ou marques déposées de MUSIC Group IP Ltd. © MUSIC Group IP Ltd. 2014 Tous droits réservés.
GARANTIE LIMITÉE
Pour connaître les termes et conditions de garantie applicables, ainsi que les informations supplémentaires et détaillées sur la Garantie Limitée de MUSIC Group, consultez le site Internet music-group.com/warranty.
HAFTUNGSAUSSCHLUSS
MUSIC Group übernimmt keine Haftung für Verluste, die Personen entstanden sind, die sich ganz oder teilweise auf hier enthaltene Beschreibungen, Fotos oder Aussagen verlassen haben. Technische Daten, Erscheinungsbild und andere Informationen können ohne vorherige Ankündigung geändert werden. Alle Warenzeichen sind Eigentum der jeweiligen Inhaber. MIDAS, KLARK TEKNIK, TURBOSOUND, BEHRINGER, BUGERA und DDA sind Warenzeichen oder eingetragene Warenzeichen der MUSIC Group IP Ltd. © MUSIC Group IP Ltd. 2014 Alle Rechte vorbehalten.
BESCHRÄNKTE GARANTIE
Die geltenden Garantiebedingungen und zusätzliche Informationen bezüglich der von MUSIC Group gewährten beschränkten Garantie fi nden Sie online unter music-group.com/warranty.
LEGAL RENUNCIANTE
O MUSIC Group não se responsabiliza por perda alguma que possa ser sofrida por qualquer pessoa que dependa, seja de maneira completa ou parcial, de qualquer descrição, fotografi a, ou declaração aqui contidas. Dados técnicos, aparências e outras informações estão sujeitas a modifi cações sem aviso prévio. Todas as marcas são propriedade de seus respectivos donos. MIDAS, KLARK TEKNIK, TURBOSOUND, BEHRINGER, BUGERA e DDA são marcas ou marcas registradas do MUSIC Group IP Ltd. © MUSIC Group IP Ltd. 2014 Todos direitos reservados.
GARANTIA LIMITADA
Para obter os termos de garantia aplicáveis e condições e informações adicionais a respeito da garantia limitada do MUSIC group, favor verifi car detalhes na íntegra através do website music-group.com/warranty.
法的放棄
ここに含まれる記述 、写真、意見の全体 または一部に依拠して、いかなる人が損害 を生じさせた場合にも、MUSIC Group は一切の賠 償責任を負いません。技術 仕様、外観およびその他の情報は予 告なく変更になる場合 があります。商 標はすべて、それぞれの所有者に帰属 します。MIDAS、KLARK TEKNIK、
TURBOSOUND、BEHRINGER、 BUGERAおよびDDAはMUSIC Group IP Ltd.の商標または登録商標で
す。© MUSIC Group IP Ltd. 2014無断転 用禁止。
限定保証
適用される保証条件と
MUSIC Group
 の限定保証に関する概要については、 オンライン上
music-group.com/warranty
にて詳細をご確認ください。
法律声明
对于任何因在此说明书提到的全部 或部份描述、 图片或声明而造成的损 失, MUSIC Group 不负任何责任。 技术参数和外观若有更改, 恕不另行 通知。 所有的商标均为其各自所有者 的财产。 MIDAS, KLARK TEKNIK, TURBOSOUND, BEHRINGER, BUGERA DDAMUSIC Group IP Ltd. 公司的 商标或注册商标。 © MUSIC Group IP Ltd. 2014 版权所有。
保修条款
有关音乐集团保修的适用条 款及其它相关信息, 请登陆 music-group.com/warranty 网站查看完整的详细信息。
Thank you for choosing a TURBOSOUND loudspeaker product for your application. If you would like further
information about this or any other TURBOSOUND product, please visit our website at turbosound.com.
Unpacking
After unpacking the bracket/fl y kit please check carefully for damage and make sure all parts are present.
If damage is found or any parts are missing, please notify your supplier at once. You, the consignee,
must instigate any claim. Please retain all packaging in case of future re-shipment.
Mounting and Fixing
The table below summarises the rigging parts or kits required for various applications, and some examples
of the possible rigging options are illustrated.
TCS series cabinets are designed with multiple internal rigging points to suit many possible mounting
methods in permanent installations. All cabinets can be simply suspended using optional M8 or M10
shoulder eyebolts coupled to the internal rigging points provided. Remove the appropriate countersunk
screws and replace them with eyebolts, which must have a thread length of at least 18mm. Use the rear
rigging point to angle the cabinet for optimum room coverage. Cabinets may be hung upside down if
required. TURBOSOUND WB-20, WB-55 and CB-55 wall and ceiling brackets are optionally available for
TCS series cabinets, and these are also compatible with OmniMount* wall and ceiling brackets which use
60 mm x 60 mm hole spacing.
Model Wall Ceiling Downfi ll Array Kit Eyebolts
TCS62
WB-20
TCS62-SB
CB-55
TCS62-SB
TCS62-SB M8 Thread
TCS122 WB-55 CB-55
TCS122-FP
TCS-FK1 TCS-FK2
EB-10-40
TCS152 WB-55 CB-55
TCS152-FP
TCS-FK1 TCS-FK2
EB-10-40
TCS115B
TCS115-FP
TCS-FK3
EB-10-40
TCS Subwoofers EB-10-40
4
TCS Brackets Quick Start Guide
5
Some typical examples of the possible rigging options are shown here:
TCS Series Flying Components
Wall and Ceiling Brackets
To install a loudspeaker using TURBOSOUND wall and ceiling brackets, fi rst separate the brackets into their
wall/ceiling plate and speaker plate component parts. Remove the countersunk bolts on the rear panel of
the cabinet. Attach the speaker plate to the cabinet with the bolts supplied. Fix the wall/ceiling plate in the
venue using appropriate fi xings (not supplied). Lift the loudspeaker on to the wall plate and re-assemble
the bracket parts, adjust the vertical angle and tighten all bolts.
Downfi ll Applications
The TCS62 can be mounted underneath a TCS122 or TCS152 cabinet
to provide downfi ll coverage using the TCS62-SB swivel bracket. First
disassemble the swivel bracket into its component parts. Remove the
countersunk bolts from the bottom panel of the TCS152 cabinet and
fi t the section with the elongated holes using the fi xings supplied.
Remove the countersunk bolts on the top panel and fi t the swivel bracket
using the supplied fi xings. Re-assemble the swivel bracket, angle as
appropriate and tighten all fi xings.
To install the TCS62 in a ceiling-mount application, separate the component parts as above, and fi x the
top section to the ceiling with appropriate fi xings (not supplied). Fit the other half to the TCS62 cabinet,
re-assemble the bracket, angle as appropriate and tighten all fi xings.
Loudspeaker Arrays and Clusters
An array of two or more cabinets requires the use of kits of fl yplates and inter-cabinet couplers, which are
fi xed to the cabinet sides through the M10 rigging points and assembled together in a ‘daisy chain’ fashion
to build up the required array. For all loudspeaker arrays consisting of two or more cabinets:
The number of inter cabinet coupler kits required = the number of boxes – 1, The number of fl yplate kits required = the number of boxes.
TCS62-SB SWIVEL BRACKET
6
TCS Brackets Quick Start Guide
7
Illustrated here are the components parts available for TCS cabinets:
Suspending with Eyebolts
TCS cabinets can be suspended using optional eyebolts coupled to the internal rigging points provided on
the top, bottom and sides and back. The simplest method is to use the two rigging points on the top and a
single pull-back rigging point in the centre of the rear panel.
Remove the appropriate countersunk screws and replace them withshoulder eyebolts, which must have
a thread length of at least 18 mm. Use the rear rigging point to angle the cabinet for optimum room
coverage. Cabinets may be hung upside down if required.
IMPORTANT NOTE FOR ALL INSTALLATION METHODS: The mounting of a permanently installed sound system
may be dangerous unless undertaken by qualifi ed personnel with the required experience and certifi cation
to perform the necessary tasks. Walls, fl oors or ceilings must be capable of safely and securely supporting
the actual load. The mounting accessory used must be safely and securely fi xed both to the loudspeaker
and to the wall, fl oor or ceiling.
When mounting rigging components on walls, fl oors or ceilings, ensure that all fi xings and fasteners
used are of an appropriate size and load rating. Wall and ceiling claddings, and the construction and
composition of walls and ceilings, all need to be taken into account when determining whether a
particular fi xing arrangement can be safely employed for a particular load. Cavity plugs or other specialist
fi xings, if required, must be of an appropriate type, and must be fi tted and used in accordance with the
maker’s instructions.
The operation of your speaker cabinet as part of a fl own system, if installed incorrectly and improperly,
can potentially expose persons to serious health risks and even death. In addition, please ensure that
electrical, mechanical and acoustic considerations are discussed with qualifi ed and certifi ed (by local state
or national authorities) personnel prior to any installation or fl ying.
Make sure that speaker cabinets are set up and fl own by qualifi ed and certifi ed personnel only,
using dedicated equipment and original parts and components delivered with the unit. If any parts or
components are missing please contact your Dealer before attempting to set up the system.
Be sure to observe the local, state and other safety regulations applicable in your country. MUSIC Group,
including the MUSIC Group companies listed on the enclosed “Service Information Sheet”, assumes no
liability for any damage or personal injury resulting from improper use, installation or operation of the
product. Regular checks must be conducted by qualifi ed personnel to ensure that the system remains in a
secure and stable condition. Make sure that, where the speaker is fl own, the area underneath the speaker is
free of human traffi c. Do not fl y the speaker in areas that can be entered or used by members of the public.
Speakers create a magnetic fi eld, even if not in operation. Therefore, please keep all materials that can
be affected by such fi elds (discs, computers, monitors, etc) at a safe distance. A safe distance is usually
between 1 and 2 metres.
TCS62-SB (WH) Swivel bracket for TCS62
Contents:
1 x Bracket
2 x M8 Bolts
2 x M8 Spring Washers
2 x M8 Flat Washers
TCS122-FP (WH) Fly Plate Kit for TCS122
2 x M10 Bolts
2 x M10 Spring Washers
2 x M10 Flat Washers
TCS152-FP (WH) Fly Plate Kit for TCS152
Contents:
TCS115-FP (WH) Fly Plate Kit for TCS115B
2 x Fly Plates
4 x M10 Bolts
4 x M10 Spring Washers
4 x M10 Flat Washers
Contents:
2 x Fly Plates
4 x M10 Bolts
4 x M10 Spring Washers
4 x M10 Flat Washers
TCS-FK1 (WH) Inter-Cabinet Coupler Kit for TCS122 or TCS152
Contents:
2 x ICC
Contents:
2 x Fly Plates
4 x M10 Bolts
4 x M10 Spring Washers
4 x M10 Flat Washers
TCS-FK3 (WH) Inter-Cabinet Coupler Kit for TCS115B
Contents:
2 x ICC
TCS-FK2 (WH) Inter-Cabinet Coupler Kit for TCS122 or TCS152
Contents:
2 x ICC
EB-10-40 Eyebolt M10 x 40mm
Contents:
1 x Eyebolt
Loading...