Turbo Chef Technologies NGC-1478 User Manual
Proj ect _______________________________________________________
Item No. ______________________________________________________
Quantity _______________________________________________________________________
TORNADO
THE
TORNADO
PERFORMANCE
n
The Tornado® evenly and consistently
toasts, browns and crisps food up to 12X
faster than traditional cooking methods,
resulting in a high level of throughput
without compromising quality
VENTILATION
n
UL (KNLZ) listed for ventless operation.
n
EPA 202 test (8 hr):
- Product: Pepperoni Pizzas
- Results: 0.21 mg/m
- Ventless Requirement: <5.00 mg/m
n
Internal catalytic filtration to limit smoke,
grease, and odor emissions.
3
2
®
EXTERIOR CONSTRUCTION
n
430 stainless steel front, top, sides and back
n
4” (102 mm) adjustable legs
n
Cool to the touch pull down door with microwave seal
®
INTERIOR CONSTRUCTION
n
304 stainless steel interior
n
Fully insulated cook chamber
n
Removable / variable cooking surfaces
n
Exposed bottom browning element
STANDARD FEATURES
n
Integral recirculating catalytic converter for UL (KNLZ) listed
ventless operation
n
Variable-speed High h recirculating impingement airow system
n
Variable cooking surfaces (racks, stones and platters)
n
Independently-controlled bottom browning element
n
Smart Voltage Sensor Technology* (U.S. only)
n
Smart menu system capable of storing up to 128 recipes
n
Built-in self-diagnostics for monitoring oven components and
performance
n
Stackable design (requires stacking kit)
n
Manual snooze mode
†
3
n
Includes plug and cord (6 ft. nominal)
n
Smart card compatible
n
Warranty – 1 year parts and labor
COMES WITH STANDARD ACCESSORIES
n
1 Aluminum Paddle (NGC-1478)
n
1 Bottle Oven Cleaner (103180)
n
1 Bottle Oven Guard (103181)
n
2 Trigger Sprayers (103182)
n
2 PTFE Baskets (100011)
3
5
1. Blower Motor
2. Impingement Heater
3. Impinged Air
4. Bottom Browning Element
5. Microwave Bursts
6. Catalytic Converter
1
4
6
This product conforms to the ventilation recommendations set forth by NFPA96 using
EPA202 test method.
* Smart Voltage Sensor Technology does not compensate for lack of or over voltage situations. It is the
responsibility of the owner to supply voltage to the unit according to the specications on the back of this sheet.
†
Ventless certication is for all food items except for foods classied as “fatty raw proteins.” Such foods include
bone-in, skin-on chicken, raw hamburger meat, raw bacon, raw sausage, steaks, etc. If cooking these types of
foods, consult local HVAC codes and authorities to ensure compliance with ventilation requirements.
Ultimate ventless allowance is dependent upon AHJ approval, as some jurisdictions may not recognize the
UL certification or application. If you have questions regarding ventless certifications or local codes please
email ventless.help@turbochef.com
TurboChef reserves the right to make substitutions of components or change specications without prior notice.
NGC-1299/Revision N/
May 2013
26” (660 mm)
Standard
25.7” (653 mm)
23”
(584 mm)
Max Circuit Requirement 20 amp
Plug IEC 309, 5-pin, 32 amp
Max Input 10500 watts
Microwave Input Power 3500 watts
NGCED (NGC-1180-1D)
Phase 3 Phase
Voltage 230 VAC
Frequency 50 Hz
Current 30 amp
Max Circuit Requirement 32 amp
Plug IEC 309, 4-pin, 32 amp
Max Input 10500 watts
Microwave Input Power 3500 watts
NGCUK (NGC-1180-1K)
Phase 1 Phase
Voltage 230 VAC
Frequency 50 Hz
Current 30 amp
Max Circuit Requirement 32 amp
Plug IEC 309, 3-pin, 32 amp
Max Input 6700 watts
Microwave Input Power 3500 watts
JAPAN
NGCJD - 50Hz/ 3 Phase (NGC-1180-1D-2005-1)
NGCJD - 60Hz/ 3 Phase (NGC-1180-1D-2005-2)
NGCJK - 50Hz/ 1 Phase (NGC-1180-1K-2005-3)
NGCJK - 60Hz/ 1 Phase (NGC-1180-1K-2005-4)
Phase 1 or 3 Phase
Voltage 200 VAC
Frequency 50 or 60 Hz
Current 30 amp
Max Circuit Requirement 30 amp
Plug PSE-marked, 3 or 4-blade, 30 amp
Max Input 10500 or 6700 watts
Microwave Input Power 3500 watts
3-Phase
1-Phase
SHIPPING INFORMATION
U.S.: All ovens shipped within the U.S. are packaged in a double-wall cor-
rugated box banded to a wooden skid.
International: All International ovens shipped via Air or Less than Container Loads are packaged in wooden crates.
Box size: 34” x 30” x 30” (864 mm x 762 mm x 762 mm)
Crate size: 37”x 33” x 34” (940 mm x 838 mm x 864 mm)
Item class: 85 NMFC #26770 HS code 8419.81
Approximate boxed weight: 260 lb. (118 kg)
Approximate crated weight: 320 lb. (145 kg)
Minimum entry clearance required for box: 30.5” (775 mm)
Minimum entry clearance required for crate: 33.5” (851 mm)
*All AU-New Zealand ovens with clips allow for 5 pin plug.
TurboChef recommends installing a type D circuit breaker for all installations.
2801 Trade Center Drive / Carrollton, Texas 75007 USA
US: 800.90TURBO (800.908.8726) / International: +1 214.379.6000
TurboChef Global Operations
Fax: +1 214.379.6073 / turbochef.com
®
TORNADO
19”
(483 mm)
11.25” (286 mm)
DIMENSIONS
Single Units
Height 19” 483 mm
on legs 23” 584 mm
Width 26” 660 mm
Depth 25.7” 653 mm
with handle 28.2” 716 mm
Weight 190 lbs. 86 kg
Stacked Units
Height 38” 965 mm
Width 26” 660 mm
Depth 25.7” 653 mm
with handle 28.2” 716 mm
Weight 380 lbs. 172 kg
Cook Chamber
Height 8” 203 mm
Width 15.5” 394 mm
Depth 14.7” 373 mm
Volume 1.05 cu.ft. 29.9 liters
Wall Clearance
Top 4” 102 mm
Sides 2” 51 mm
(Stacking Kit Required)
(Oven not intended for built-in installation)
ELECTRICAL SPECIFICATIONS
NORTH AMERICA
NGC (NGC-1180-1)
Phase 1 Phase
Voltage 208/240 VAC
Frequency 60 Hz
Current 30 amp
Max Circuit Requirement 30 amp
Plug/Cord NEMA 6-30P; 1.5m, H07RN-F
Max Input 5990/6675 watts
Microwave Input Power 3500 watts
NGCBK (NGC-1180-1K-2020)
Phase 1 Phase
Voltage 220 VAC
Frequency 60 Hz
Current 30 amp
Max Circuit Requirement 30 amp
Plug IEC 309, 3-pin, 32 amp
Max Input 6700 watts
Microwave Input Power 3500 watts
EUROPE/ASIA-PACIFIC
NGCEW (NGC-1180-1W for standard)
NGCEW (NGC-1180-1W-2024 for Australia/New Zealand)*
NGCKW (NGC-1180-1W-2004 for South Korea)**
Phase 3 Phase
Voltage 400 VAC
Frequency 50 Hz or 60 Hz**
Current 16 amp
Australia/New Zealand
Loading...