Turbo Air MST-28 Installation Manual

CAUTION!
PLEASE KEEP POWER
SWITCH ON BEFORE
OPERATING THIS EQUIPMENT
Turbo Air Speed up the Pace of Innovation
Sandwich Salad Unit Refrigerator Installation and Operation Manual
REFRIGERATOR
MST-28 MST-36 MST-48 MST-60 MST-72
www.turboairinc.com
CONTENTS
PAGE
SPECIFICATION
SERIAL NUMBER
INSTALLATION OF CASTER
INSTALLATION OF DRAIN PAN
HOW TO CLEAN THE PAN SUPPORTER
INSTALLATION
CLEANING & CAUTION
BASIC OPERATION
DOORS REVERSIBLE INSTRUCTION
BEFORE REQUESTIONG SERVICE
STAINLESS STEEL EQUIPMENT CARE AND CLEANING
WARRANTY
SPECIFICATIONS
2
2
3
4
5
6
7
8
9-12
13
14-15
16-18
SANDWICH / SALAD UNITS
MODEL COMP H.P. V/Hz REFRIGERANT AMPS WEIGHT
MST-28
MST-36
MST-48
MST-60
MST-72
1/5 115V/60Hz R-134A 3.3A 198lbs
1/4 115V/60Hz R-134A 6.6A 220lbs
1/3 115V/60Hz R-134A 6.5A 242lbs
1/2 115V/60Hz R-134A 8.9A 330lbs
1/2 115V/60Hz R-134A 9.9A 374lbs
SERIAL NUMBER
The serial number is located on the rating label which is on the left interior wall. Please retain the unitʼs serial number for service purpose.
2
INSTALLATION OF CASTERS
1) Screw the caster (in rear side) and the caster brakes (in front side) by using caster wrench.
2) Use the caster shims to level the cabinet, if necessary, by inserting them to stems of the casters.
3
INSTALLATION OF DRAIN PAN
1) In damp season, when the drain water overflow the drain pan, remove the drain pan and pour the water away. And then set the drain pan back up as below drawing please. (Model : MST-28, MST-28-12, MUR-28, MUF-28)
MST-28, MST-28-12, MUR-28, MUF-28
4
HOW TO CLEAN THE PAN SUPPORTER
MODEL
MST-28, MST-48 MST-60, MST-72 MST-28-12, MST-48-18 MST-60-24, MST-72-30
1) Remove the Guide Pans and Pans. Then pull out the Pan Supporter. Clean the pan supporter and reinstall in place.
5
INSTALLATION
1. GOOD AIR CIRCULATION
- Be sure to avoid any object which may stop the air flow.
- Be sure that there is ample air space so that air can flow through the rear of the unit.
- Turbo Air recommends that the rear of the unit be no less than 5 inches from the wall.
2. PLACE ON STRONG GROUND
- Be sure the location chosen has a floor strong enough to support the total weight of the cabinet and contents.
3. DO NOT PLACE NEAR HEAT
- Be sure to avoid hot corners and locations near stoves.
- High ambient temperature will make much lower cooling efficiency.
4. INDOOR USAGE ONLY
- Be sure to install this unit indoor, so it will not get wet from the rain.
5. STABILIZING
- Make sure the unit is installed in a stable condition with the front wheels locked while in use.
6. LEVELING
- Be sure that the unit is level from front to back and side to side.
7. UNIT SHOULD BE ON DEDICATED OUTLET.
6
Loading...
+ 12 hidden pages