CAGE COMPONENTS
1 Wire body 2 Metal Left Shelves 4 Wire Clips
1 Metal tray 2 Metal Right Shelves 4 Rolling Casters
1 Metal Stand 4 Metal Ramps 1 Wrench
Step 1: Attach 4 Rolling Casters into Metal Stand by using
Wrench, then put in the Tray and Wire Body as shown.
Step 2:
(1)Secure Wire Body to the Metal Stand by using Wire Clips as shown.
(2) Assemble Metal Shelves into cage as shown. Important note: when putting the shelves into the
cage, the 2 Left Shelves have holes in the right side, and the 2 Right Shelves have holes in the left side.
(3) Assemble Metal Ramps into cage as shown. Important note: attach the ramps to the shelves by
hooking the ramps onto the shelves by the curved ends. The straight ends of the ramps will fit into the
next shelf.
Step 3: Now, your new cage is ready for use.
Cage Assembly Instructions
Loading...