TTE Technology 49S517 User Manual

100g书纸。

PRODUCTION FORM

TCL多媒体科技控股有限公司

版本号：

物料编号

内容：

型号：

时间：

：

备注: 此物料如是环保物料, 则在BOM中体现。

43S517/MST10V

QSG (简易操作指南˅

70-P6ST10-QSG1A

2017-10-17

牌子名称(BRAND NAME):

B.O.M.编号:

内容：

ii)

iii)

iv)

稿件比例(SCALE)

尺寸(SIZE)

材质

颜色(COLOUR)

TCL提供客户提供

磁盘：

样稿：

生效ODF和时间

ODF ˂ DATE:

1:1

试产机

种类(TYPE OF JOB.):

塑胶厂

QA 部

IQC

PE部

采购部

往(TO):

CUSTOMER

Silk Screen Printing

丝印

Was h Printing

水墨印刷

Four-C olour P rinting

四色印刷

Spraying Paint

喷油

塑胶颜色

Plas tic Colour

TCL

Others

其它

PMC 部

制作人

PREPARED BY˖

项目工程师

CHECKED BY:

⎭ཌᐸ൰䜞ᇗ᢯

REVIEWED BY:

平面/审核

CHECKED BY˖

NA-TC L

H3-43P60HU-USAAWAA

四

༿ᓖፀྻෂဵPANTONE186C

ྜྷএୈࡒྻෂሶ࿟భ୅

)༿႙ዹཀྵཱྀ*

色印刷，折页，骑马钉。

Hi! Let’s get started.

ࡨ͹ߎ֣Ցݔଚܑ஼ސڔ

凿ݽ

Hi! Let’s get started.

S-Series S517

DO NOT RETURN TO STORE

TCL SUPPORT:

www.tclusa.com/support

1-877-300-8837

WE ARE READY TO HELP

TAKE CARE WHEN REMOVING THE TV

VISIT US AT WWW.TCLUSA.COM

Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualiﬁed service personnel.

This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury.

This symbol indicates important instructions accompanying the product.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

This symbol indicates that this product incorporates double insulation between hazardous main voltage and user accessible parts. When servicing, use only identical replacement parts.

WARNING

To reduce the risk of ﬁre or electric shock, do not expose this product to rain or moisture. This product should not be exposed to dripping or splashing. No objects ﬁlled with liquids, such as vases, should be placed on the apparatus.

WARNING

The TV is unstable if it is not properly attached to the base or mounted to the wall. Please follow the base or wall mounting instructions provided in the User’s Guide to ensure your safety.

Important Information

Warning: The batteries shall not be exposed to excessive heat such as sunshine, ﬁre or the like.

Model No. Serial No.

Purchase Date Dealer/Address/Phone

Refer to the identiﬁcation/rating label located on the back panel of your product for its proper operating voltage.

Cable TV Installer: This reminder is provided to call your attention to Article 820-40 of the National

Electrical Code (Section 54 of the Canadian Electrical Code, Part 1) which provides guidelines for proper grounding and, in particular, speciﬁes that the cable ground should be connected to the grounding system of the building as close to the point of cable entry as practical.

Important: This television is a table model and is designed to sit on a ﬁrm, ﬂat surface. Don’t place the

TV on soft carpeting or similar surface because the ventilation slots on the bottom of the unit will be blocked, resulting in reduced lifetime from overheating. To assure adequate ventilation for this product, maintain a spacing of 1 inch from the top and side of the TV receiver and 2 inches from the rear of the TV receiver and other surfaces. Also, make sure the stand or base you use is of adequate size and strength to prevent the TV from being

the TV. Refer to the Important Safety Instructions on the next page. The Power button on this TV and your remote control puts the TV into a very low-power standby mode

disconnect the power cord from the outlet. The mains plug/appliance coupler is used to completely turn

allows you to disconnect the power cord when desired.

Product Registration

Please register your TCL TV purchase on-line at www.tclusa.com. It will make it easier to contact you should it ever be necessary. Registration is not required for warranty coverage.

Product Information

Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model numbers in case you need them. These numbers are located on the product. Warning: Changes or modiﬁcations to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Keep the apparatus at least 8 inches away from the human body.

For the best viewing experience, remove the energy guide label from the TV front panel or TV screen before use.

Input Signal Compatibility

480i, 480p, 720p/60Hz, 1080i/60Hz, 1080p/60Hz, 2160p/24/30/60Hz

480i

480i, 480p, 720p, 1080i (NTSC, ATSC, and QAM formats)

HDMI

Composite Video

Antenna/Cable

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.

9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

10. WARNING: Please refer the information on exterior bottom enclosure for electrical and safety

information before installing or operating the apparatus.

11. WARNING: The mains plug is used as disconnect device, the disconnect device shall remain readily

operable.

12. When not in use and during movement, please take care of the power cordset, e.g. tie up the power cordset with cable tie or something like that. It shall be free from sharp edges and the like that can cause abrasion of the power cordset. When put into use again, please make sure the power cordset being not damaged, If any damages found, please look for the service person to replace the power cordset speciﬁed by the manufacturer or have the same characteristics as the original one.

13. No naked ﬂame sources, such as lighted candles, should be placed on the apparatus.

14. Unplug this apparatus during lightning storms or when unused for long periods of time.

15. Only use attachments/accessories speciﬁed by the manufacturer.

16. Use only with the cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

17. Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

18. For safe operation of the apparatus, observe these installation requirements: Keep at least 2 inches of ventilation space between the rear cover of the apparatus and the wall. Keep at least 1 inch of ventilation space between the apparatus and all other surfaces. Do not allow any of the apparatus’ ventilation openings to be blocked by objects that might obstruct them, such as; newspapers, curtains, table-cloths or any other objects. Do not expose the apparatus to any external heat sources. Do not place any heat sources such as candles, lamps, etc. on the apparatus. Do not expose the device to high levels of humidity or to any possible sources of moisture. When disposing of used batteries rom the remote control, consult local regulations regarding proper disposal.

19. If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70-2011 (Section 54 of Canadian Electrical Code, Part 1) provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead in wire to an antenna-discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See following example:

ANTENNA LEAD IN WIRE

GROUND CLAMP

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUND CLAMPS

GROUNDING CONDUCTORS (NEC SECTION 810-21)

ELECTRIC SERVICE EQUIPMENT

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PARTH)

+ 11 hidden pages