TTE Technology 23F3300 User Manual

: , BOM

李英

数字签名人李英

DN：cn=李英， ou=Shenzhen， dc=com 日期：2013.11.19 09:16:43 +08'00'

李建军

2013.11.19 11:11:17 +08'00'

黎宜全

数字签名者：黎宜全

DN：dc=com, dc=tclking, ou=Shenzhen, ou=全球研发中心, ou=设计10所（结构）, cn=黎宜全日期：2013.11.19 11:17:29 +08'00'

(BRAND NAME)

B.O.M.

(TO):

²É¹º²¿

NA-TCL

H3-23E33BJ-USAAWAA

Ïã¸Û

²É¹º²¿ ²É¹º²¿ ²É¹º²¿

²¿Æ·²¿IQC

PMC

72-L23F33-XNA1A

23F3300(MS39R)

2013-11-19

¹¤³Ì²¿

(TYPE OF JOB.):

ii) iii)

iv)

Silk Screen Printing

(SCALE)

(SIZE)

(COLOUR)

1:1

Wash Printing

Four-Colour Printing

Spraying Paint

Plastic Colour

Others

PREPARED BY

TCL

CUSTOMER

CHECKED BY

ODF

ODF DATE:

CHECKED BY:

REVIEWED BY:

User’s Guide

For use with models

Need assistance?

visit our website at www.tclusa.com

or call 1-877-300-8837 (for mainland 48 States),

or 1-877-800-1269 (for AK, HI, and Puerto Rico).

: 23F3300

Figures and illustrations in this User’s Guide are provided for reference only and may dier from actual product appearance. Product design and specications may be changed without notice.

Important Information

CAUTION

RISK OF ELECTRIC SHOCK. DO NOT OPEN.

Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualied service personnel.

This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury.

WARNING

To reduce the risk of re or electric shock, do not expose this product to rain or moisture. This product should not be exposed to dripping or splashing. No objects lled with liquids, such as vases, should be placed on the apparatus.

WARNING

Refer to the identication/rating label located on the back panel of your product for its proper operating voltage.

FCC regulations state that unauthorized changes or modications to this equipment may void the user’s authority to operate it.

Cable TV Installer: This reminder is provided to call your attention to Article 820-40 of the National Electrical Code (Section 54 of the Canadian Electrical Code, Part 1) which provides guidelines for proper grounding and, in particular, species that the cable ground should be connected to the grounding system of the building as close to the point of cable entry as practical.

Important: This television is a table model and is designed to sit on a rm, at surface. Don’t place the TV on soft carpeting or similar surface because the ventilation slots on the bottom of the unit will be blocked, resulting in reduced lifetime from overheating. To assure adequate ventilation for this product, maintain a spacing of 4 inches from the top and side of the TV receiver and 2 inches from the rear of the TV receiver and other surfaces.

Also, make sure the stand or base you use is of adequate size and strength to prevent the TV from being accidentally tipped over, pushed off, or pulled off. This could cause personal injury and/or damage to the TV. Refer to the Important Safety Instructions on the next page.

The Power button (followed by the power symbol) on this TV and your remote control puts the TV into a very lowpower standby mode but will not completely turn the power off. In order to completely shut the power off, you will need to disconnect the power cord from the outlet. The mains plug/appliance coupler is used as disconnect device, the disconnect device shall remain readily operable. Therefore, you should ensure that the TV is installed in a manner that allows you to disconnect the power cord when desired.

The batteries shall not be exposed to excessive heat such as sunshine, re or the like.

This symbol indicates that this product incorporates double insulation between hazardous main voltage and user accessible parts. When servicing, use only identical replacement parts.

This symbol indicates important instructions accompanying the product.

WARNING

The TV is unstable if it is not properly attached to the base or mounted to the wall. Please follow the base or wall mounting instructions provided in the User’s Guide to ensure your safety.

Product Registration

Please register your TCL purchase on-line at www.tclusa.com. It will make it easier to contact you should it ever be necessary. Registration is not required for warranty coverage.

Product Information

Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model numbers in case you need them. These numbers are located on the product.

Model No. ______________________ Serial No._____________________________________ Purchase Date __________________ Dealer/Address/Phone__________________________

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

ampliers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The

wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet,

consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where it exits from the apparatus.

11. Only use attachments/accessories specied by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15. If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is

grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70-2011 (Section 54 of Canadian Electrical Code, Part 1)

provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna-discharge unit, size of grounding conductors, location of antenna-discharge

unit, connection to grounding electrodes, and requirements for the grounding electrode. See following

example:

ELECTRIC SERVICE

ELECTRIC SERVICE EQUIPMENT

EQUIPMENT

ANTENNA LEAD IN WIRE

GROUND CLAMP

ANTENNA DISCHARGE UNIT

ANTENNA DISCHARGE UNIT(NEC SECTION 810-20)

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

POWER SERVICE GROUNDING ELECTRODE SYSTEM

ELECTRODE SYSTEM (NEC ART

(NEC ART 250, PA RTH)

250, PARTH)

Table of Contents

Important Information ................................ 1

Important Safety Instructions ..................... 2

Chapter 1 - Connections and Setup

Before Initial Setup .................................... 4

Check Supplied Parts ................................ 4

Attaching Your TV to the Base Stand ........ 5

Mounting Your TV to the Wall .................... 5

Buttons on TV ............................................ 6

Explanation of Jacks on TV ....................... 6

Choose Your Connections ......................... 7

Remote Control Functions ......................... 9

Obtain the Signal ..................................... 10

Switching On ........................................... 10

Switching Off ........................................... 10

Setup Wizard ............................................11

Chapter 2 - Menu Operation

Menu Display ........................................... 12

Using Menu System ................................ 13

Input Menu............................................... 13

Picture Menu ........................................... 13

Picture Mode.................................................13

Brightness ..................................................... 13

Contrast ........................................................13

Saturation .....................................................13

Sharpness.....................................................13

Tint ................................................................ 13

Color Mode ...................................................13

Back Light ..................................................... 13

Dynamic Backlight ........................................13

Geometry ...................................................... 13

Advanced Settings ........................................ 14

Sound Menu ............................................ 14

Equalizer ....................................................... 14

Speaker ........................................................14

SPDIF Type ..................................................14

Smart Volume ............................................... 14

MTS ..............................................................14

Audio Language ...........................................14

Settings Menu.......................................... 14

Language ...................................................... 14

Channel ........................................................15

Closed Caption .............................................15

Parental Control ............................................ 16

Time Setting .................................................17

Software Info. ...............................................17

Location. ......................................................17

Restore to Default ........................................ 18

USB Menu ............................................... 18

Chapter 3 - Other Information

Frequently Asked Questions (FAQs) ....... 19

Troubleshooting ....................................... 20

Care and Cleaning................................... 22

Television Specications.......................... 22

Limited Warranty ..................................... 23

Legal Statement of TCL ........................... 25

Chapter 1 Connections and Setup

Before Initial Setup

Protect Against Power Surges

• Connect all components before you plug any power cords into the wall outlet or power strip.

• NEVER plug your TV into an outlet that is controlled by a wall switch.

• Turn off the TV before you connect or disconnect any cables.

• Make sure all antennas and cables are properly grounded. Refer to the Important Safety Instructions.

Safety Information

• Protect components from overheating.

• Don’t block ventilation holes on any of the components. Arrange the components so that air can circulate freely.

• Don’t stack components.

• If you place the component in a stand, make sure you allow adequate ventilation.

• If you connect an audio receiver or amplier, place it on the top shelf so the heated air from it won’t harm other components.

Avoid Audio Interference

• Position cables properly; insert each cable rmly into the designated jack.

• If you place components above the TV, route all cables down one side of the back of the TV instead of straight down the middle.

• If your antenna uses 300-ohm twin lead cables, do not coil the cables.

• Keep twin lead cables away from audio/video cables.

Avoid Direct Light

Don’t place the TV where sunlight or room lighting is directed toward the screen. Use soft or indirect lighting.

Check Supplied Parts

Check that the following parts were packed with your product.

• 1 Remote Control and 2 AAA Batteries

• User’s Guide

• Quick Start Guide

• Power Cable

• Parts for Base Stand Assembly

• Base Stand attached on the back of the TV

• (ST3 x 12) Screw x 3

Replacing your remote

If you need to replace your remote, visit www.tclusa.com. A shipping and handling fee, and the appropriate sales tax, will be charged upon ordering. Have your Visa or MasterCard ready.

Connections and Setup

Attaching Your TV to the Base Stand

Your TV comes without the base stand attached so that you can choose to mount your TV either to its base stand or to a wall (wall mount sold separately). If you want to mount your TV to the wall, don’t attach the base stand, just remove the base stand from the back of TV as step 1. Follow the Mounting Your TV to the Wall instructions.

First, remove the TV bag and place it on a large, at surface such as a table or countertop. Remove the TV from the carton and place it face down on the TV bag. Be sure that the TV is face down to avoid scratching the screen. Then follow the steps below:

Note: Keep the screws and plastic parts away from grease and organic solvents to avoid damage. Especially during the assembly process.

Remove the Base Stand. Attach the Base Stand.

Base Stand

screw ST3 X 8

screws ST3 X 12

Base Stand

Mounting Your TV to the Wall

If you are mounting your TV to the wall, don’t attach the base stand.

To mount your TV to the wall, purchase a VESA wall mount.

Models of 23” Purchase a VESA 100 x 100, M4x12 screw

The VESA number is the horizontal and vertical measurement of the mounting holes. For example, 400x200 refers to the fact that the mounting measurements are 400mm horizontally and 200mm vertically.

Notes: Follow the directions included with the wall mount to mount the TV to the wall. Caution: Your wall mount must be able to bear a minimum of ve times the TV’s net weight to avoid causing

damage.

Connections and Setup

Buttons on TV

If you cannot locate your remote, you can use the TV panel buttons on your TV to operate many TV features.

Selects channels stored in the channel list or acts as the up/

CH+/-

down arrow (▲/▼) through the menu items.

Increases/decreases the volume or acts as the right/left

VOL+/-

MENU Brings up the TV’s main menu.

INPUT Selects the signal source.

arrow (◄/►) through the menu items.

VOL+ also acts as the OK button when in the menu system.

(POWER button) Turns the TV on or to standby mode.

INPUT

Explanation of Jacks on TV

This section describes the jacks on the side/back panel of your TV. There are several ways to connect components.

SPDIF- DIGITAL AUDIO OUT (coaxial): Use a digital coaxial cable to connect your TV to a compatible audio receiver.

COMPONENT IN (CMPT): Lets you connect a component that has component video jacks, such as a DVD player or set-top box. ( Green jack for Y, Blue jack for Pb and Red jack for Pr )

• Y Pb Pr (Component Video): Provides good picture quality because the video is separated into three signals. Use three video-grade or component video cables for the connection.

• L/R AUDIO: Provides left and right audio connection when using the CMPT VIDEO input. Red and white

jacks for R AUDIO and L AUDIO connection.(Note: AV IN and COMPONENT IN share the same L/R AUDIO and Y/Video input jacks.)

AUDIO/VIDEO IN (AV IN): Lets you connect a component that has composite video jacks, such as a VCR, DVD player or set-top box. Green jack for VIDEO connection, red and white jacks for R AUDIO and L AUDIO connection.

VGA (PC VIDEO IN): Connect your computer or other component with a VGA output to this jack using a 15-pin,D-sub cable.

DVI/PC AUDIO IN (used for DVI/PC only): Provides audio connection when using HDMI/DVI INPUT jack for DVI or when using PC VIDEO IN.

Y/VIDEO

AV IN

AUDIO

COMPONENT IN

(CMPT)

SPDIF

DVI/PC

AUDIO IN

VGA

(PC VIDEO IN)

ANT/CABLE

/SAT IN

Connections and Setup

USB: Allows you to connect a compatible mass storage

device.

HDMI IN (DVI) (High-Denition Multimedia Interface/

Digital Visual Interface): Provides an uncompressed digital connection that carries both video and audio data by way of an integrated mini-plug cable. Since HDMI technology is based on Digital Visual Interface (DVI), the jack on the back of your TV is also compatible with DVI components.

(HEADPHONE): Allow you to connect headphones to

listen to the sound coming from the TV.

Choose Your Connections

There are several ways to connect components, such as BD player, DVD players and set-top boxes, to your TV.

Note: No cables are supplied with this unit. Please purchase the necessary cables. A high-speed HDMI cable is recommended for better compatibility.

Input Signal Compatability

Antenna/Cable 480i, 480p, 720p, 1080i (NTSC, ATSC, and QAM formats)

USB

HDMI IN (DVI)

Composite Video 480i

Component Video 480i, 480p, 720p/60Hz, 1080i/60Hz

HDMI 480i, 480p, 720p/60Hz, 1080i/60Hz, 1080p/60Hz

PC VGA SVGA XGA SXGA WXGA

+ 19 hidden pages