TSI Alnor PAN231 Specifications

Positive and negative duct

accreditation (Panda) system

model Pan231 series

The Positive and Negative Duct Accreditation (PANDA) system provides contractors, commissioning engineers, and research and development technicians with the best in class choice of test equipment to quantify air leakage in ductwork and other areas as well as the ability to measure the performance of ducted systems. The PANDA system provides a fast, accurate, automated solution and helps to ensure compliance with SMACNA, EN12237, EN1507, and EUROVENT 2/2 standards, enhancing energy savings in buildings.

Pass/Fail Reporting for Standards

+ SMACNA HVAC Air Duct Leakage Test Manual

+ EN12237 Ventilation for Buildings—Ductwork—Strength

& Leakage of Circular Sheet Metal Ducts

+ EN1507 Ventilation for Buildings—Sheet Metal Ducts

with Rectangular Section—Requirements for Strength and Leakage

+ EUROVENT 2/2 Air Leakage Rate in Sheet Metal Air

Distribution Systems

Features and Benets

+ Positive and Negative Duct Leakage Testing in one system

+ Find and x duct leaks to save energy

+ High accuracy gives condence in measurements

+ High-ow fan for testing large duct sections

+ Pressurizes duct quickly, allowing testing to begin in minutes

+ Includes TSI Model 9565-P and Model 5815 instruments:

– Automatically calculate leakage rate in real time

– Simultaneously displays ow leakage rate and static pressure

– Monitors barometric pressure and temperature to automatically

correct to Standard Temperature and Pressure (STP)

– Simplify report generation and documentation by

downloading stored data

– Works with Model 8934 Portable Printer for eld documentation

+ Weight 121 lbs. (55 kg)

UNDERSTANDING, ACCELERATED

SPECIFICATIONS

POSITIVE AND NEGATIVE DUCT ACCREDITATION PANDA SYSTEM MODEL PAN231 SERIES

Pressure Measurement (5815)

Range ±15 in. W.G. (±3,735 Pa) Resolution 0.001 in. W.G. (0.1 Pa) Accuracy 1% of reading ±0.005 in. W.G. (±1 Pa) Actual Duct Static Range ±10 in. W.G. (±2,500 Pa) at Zero Flow

Volume Flow Measurement (9565-P)

High leakage range Wilson Radial Flow Grid 21 to 424 cfm (10 to 200 l/s), 36 to 720 m3/hr Low leakage range Conical Inlet Nozzle Adapter 2 to 27.5 cfm (1 to 13 l/s),

3.6 to 46.9 m3/hr, Resolution 0.01 cfm (0.01 l/s), 0.01 m3/hr Accuracy ±2.5% of reading ±0.02 cfm (±0.01 l/s), ±0.04 m3/hr

Temperature Measurement (9565-P)

K Type thermocouple probe To EN60584 (IEC 584) Range -40 to 1200°F (-40 to 650°C) Resolution 0.1°F (0.1°C) Accuracy ±0.1% of reading ±2°F (±0.056% of reading ±1.1°C)

Barometric Pressure Measurement (9565-P)

Range 20.36 to 36.648 in. Hg (690 to 1,241 hPa),

517.5 to 930.87 mm Hg Accuracy ±2% of reading

Model 9565-P Model 5815

Power requirements

Model PAN231 220 to 240 V, 1 Phase, 50/60 Hz, 10A Model PAN231-110 110 to 120 V, 1 Phase, 50/60 Hz, 16A

Weight

121 lbs (55 kg)

Dimensions (L x W x H)

44.5 in. x 26 in. x 20 in. (1,130 mm x 660 mm x 510 mm)

PAN231, PAN231-110 Instruments included

VelociCalc® Model 9565-P meter,

DP-Calc™ Model 5815 micromanometer. See spec sheets for details on individual instruments.

Specications are subject to change without notice.

DP-Calc

is a trademark, and VelociCalc, TSI and the TSI logo are registered trademarks of

TSI Incorporated.

UNDERSTANDING, ACCELERATED

TSI Incorporated

USA Tel: +1 800 874 2811 UK Tel: +44 149 4 459200 France Tel: +33 4 91 11 87 64 Germany Tel: +49 241 523030

Printed in U.S.A.

- Visit our website www.tsi.com for more information.

India Tel: +91 80 67877200 China Tel: +86 10 8251 6588 Singapore Tel: +65 6595 6388

Carry Weight: 121 lbs (45 kg) with Instrument Box and Flex Carrying Tube Removed.