TruTech TCR4964 User Manual

WARNING

DO NOT OPEN

RISK OF ELECTRIC SHOCKRISK OF ELECTRIC SHOCK

DO NOT OPENDO NOT OPEN

CAUTION

The lightning flash with arro­whead symbol,within an equ­ilateral triangle is intended to
alert the user to the presence
of uninsulated' dangerous vo-

ltage' within the product's en­closure that may be of suffici­ent magnitude to constitute a
risk of electric shock to perso­ns.

Warning : To reduce the risk of
electric shock, do not remove
cover (or back),no user servic­eable parts inside. Refer servi­cing to qualified service pers­onnel.

The exclamation point within
an equilateral triangle is int­ended to alert the user to the
presence of important opera­ting and maintenance (servi­cing) instructions in the liter­ature accompany-ing the ap­plicance.

IMPORTANT SAFETY INSTRUCTIONS

To prevent fire or shock hazard, Do not use this plug with an
extension cord, Receptacle or other outlet unless the blades can
be fully inserted to prevent blade exposure.

To prevent fire or shock hazard. Do not expose this appliance
to rain or moisture.

To prevent electrical shock, Match wide blade plug to wide slot
fully insert.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.

9) Do not defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades
and a third grounding prong. The wide blade or the third prong
are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the
obsolete outlet.

10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.

11) Only use attachments/accessories specified by the
manufacturer.

1

12) Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused
for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.

15) This appliance shall not be exposed to dripping or splashing
water and that no object filled with liquids such as vases shall
be placed on apparatus.

2

CAUTION: Changes or modifications not expressly approved
by the party responsible for compliance could void the
user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply
with the limits for a class b digital device, pursuant to part
15 of the fcc rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. if this equipment does cause harmful
interference to radio or televison reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and
receiver.

- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.

- Consult the dealer or an experienced radio/tv technician for
help.

LOCATION OF CONTROLS

1. CD Compartment

2. Push Open/Close

3. Stop Button

4. Play/Pause Button

5. ALM2 Button

6. ALM1 Button

7. Min/Skip Backward Button

8. Hour/Skip Forward Button

9. Snooze Button

10.Standby Indicator

11.CD Display Button

12.PM Indicator

13.Program Button

14.ALM1 Indicator

15.Repeat/Random Button

16.Sleep Indicator

17.Dial Scale

18.Dimmer Knob

19.Earphone Jack

20.Buzzer/Tuner/CD Selector

21.LED Display

22.FM ST. Indicator

23.Standby/on
Alarm/off Button

24.Clock ADJ Button

25.ALM2 Indicator

26.Sleep Button

27.Snooze Indicator

28.Repeat/Random Indicator

29.FM/AM Button

30.Prog. Indicator

31.FM/ST./Mono Button

32.Tuning Knob

33.Volume Knob

34.FM Antenna

35.AC Cord

36.Battery Door
( For clock back up )

37.Speaker

1

2

9

3

10

11

12

13
14

15
16
17
18

19

20

21
22

23
24
25

26
27
28

29
30

31

32 33

34 35 36

3737