Trust AMCAP User Manual

AMCAP
V1.0
Preparation
1
2
3
4
5
Record a video
AMCAP
Install driver from CD-ROM as mentioned in paper manual.
Start AMCAP (Start Æ Programs Æ Trust Æ Product
name Æ AMCap
Preview screen appears automatically. If no preview check:
1. [Devices] Æ Select “Trust web cam” (model varies)
2. [Option] Æ Enable [Preview]
[Options] Æ Video Capture Pin
Adjust Video format for viewing:
- Frame Rate: (up to 30) Higher frame rate, image refresh quicker.
- Color Space Default at RGB 24. Set to I420 if needed.
- Resolution (Output Size) Higher resolution captures bigger video.
[Options] Æ Video Capture Filter
Adjust image quality where desired. For example, brightness, contrast, hue and etc.
AWB (Auto White Balance), Auto Mode Control are suggested to remain enabled.
B/W Mode: black and white image. Backlight compensation: backlight
compensates.
Restore: to restore previous setting. Save: to save current setting. If it turns out to undesired result, press
‘Reset to Default’ button.
3
4
5
6
7
Timed recording:
[Set Time Limit…]. See [Capture]
Mark “Use Time Limit”
Fill in x seconds for video recording]
Click [Start Capture]. Recording stops after x seconds.
Record with Audio:
Mark Audio device. See [Devices]
Mark [Capture Audio]. See [Capture]
Click [Start Capture].
Fill in ‘Capture file size:’ e.g. 30. Click [OK]
Start recording:
Click [Capture] Click [Start Capture]
Set Frame Rate: this is for recorded video. Set it if desired.
Click [OK] to start capture.
Video starts recording now. Recording needs to be stopped manually.
Stop recording
Press [ESC] (escape-key) or Click [Capture], click [Stop Capture].
Use default media player to playback­recorded file. Go to location where file is saved (step 2)
Error messages
Sorry, you have no video capture hardware.
Error during capture Stopping capture (device Lost). Select
new capture device.
Re-connect the camera or try another USB port. Camera is disconnected from computer. Close
application, reconnect and start application again. Camera is disconnected from computer. Close
application, reconnect and start application again.
1
2
Click [File] Click [Set Capture File …]
Fill in file name with extension .AVI. For example: “my video.avi”
Provide location where to store file. For example “My Documents”
Click [Open] to continue.
Loading...