Boiler Elektro
Installation instructions Page 2
24
Boiler Elektro (Electric Boiler)
Table of contents
Symbols used ........................................................................ 2
Model .................................................................................... 2
Installation instructions
Site selection and installation .......................................... 2
Water connection ............................................................... 3
Installing the safety/drain valve ............................................. 3
Water line routing .................................................................. 3
Control panel installation .................................................. 4
Function check ................................................................... 4
Warnings ............................................................................. 4
Installation instructions
20
16
24
17
7
8
1
2
Fig. A
20
5
6
14
3
9
Symbols used
The unit must only be installed and repaired by an
expert.
Symbol indicates a possible hazard.
Note containing information and tips.
Model
Boiler Elektro (electric boiler) (BE 14)
16
17
4
9
7
8
5
1
2
Fig. B
The unit must only be installed and repaired by an expert. Read the installation instructions carefully before com-
mencing the work, and then comply with them.
The year when the equipment was first put into operation must be indicated with a cross on the type plate.
6
14
Site selection and installation
2
Select an installation site (not in installation compartment
behind heater) that makes the hot water pipes as short as
possible. The boiler must be easily accessible at all times for
service work and be easy to remove and install.
Securely bolt the boiler to a suitable surface (laminated wood
panel, laminated wooden batten or metal surface) on floor of
vehicle with B 5.5 x 70 screws and washers (1). Always use
the insertion sleeves (2) that are preinstalled in the factory to
reinforce the insulating jacket.
Loading...