True TR3R-3G User Manual

TRUE FOOD SERVICE EQUIPMENT, INC.

St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366

(636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com

Specification Series

TR (Deep Reach-In) Series

Glass Door Model

SPECIFICATIONS / FEATURES

DOORS:

• Double pane, “Low-E”, thermal insulated glass. Glass assembly within extruded aluminum frame, with reinforcing backing plates in each corner. Glass assembly replaceable without removing the door from hinges.

• Lifetime guaranteed adjustable torsion type closure system with aluminum block supports. The face of each door fitted with a 15" long handle of same material as door frame.

INSULATION:

• Entire cabinet structure insulated using foamed-in-place CFC free polyurethane foam.

SHELVING:

• Heavy gauge full or half height pilasters and tray slides/shelving factory installed at no charge.

• Interior kit must be indicated at time of order. Note: Tray slide sets and shelves can also be ordered individually.

• (1) interior kit option included per section at no charge. (4) different interior kits available. See “optional accessories” section.

TR3R-3G

True introduces its latest offering designed specifically

to meet the needs of consultants.

LIGHTING:

• Safety shielded fluorescent interior lighting. Integrated door light standard.

REFRIGERATION SYSTEM:

• Oversized refrigeration system factory balanced using CFC free 134A refrigerant.

Project Name:

Location:

Item #: Qty:

Model #:

Glass Door Deep Reach-In

Refrigerator

❒ TR3R-3G

AIA #

SIS #

SPECIFICATIONS / FEATURES

CABINET CONSTRUCTION:

• Exterior - 300 series stainless steel front, shroud. 300 series stainless steel exterior ends, top, back, and bottom.

• Interior - 300 series stainless steel interior cabinet side walls, back, and floor. Construction of liner in accordance with NSF standards.

• Barrel lock standard for each door. Locks keyed alike.

• Digital exterior temperature monitor with manual defogger control, large LED display for quick and easy temperature identification.

• Cabinet mounted on a welded, galvanized frame rail, enamel dipped and baked for permanent bond on all surfaces, provides additional corrosion protection. Frame rail fitted with 4" diameter polyolefin castors, (front castors include brakes).

Remote cabinets available 14% off list

Consult factory technical service dept. for BTU information.

(condensing units supplied by others).

Printed in

U.S.A.

10/03

YEAR

COMPRESSOR

Exceptions:

TR/TA/TG series only. (5% list upcharge)

APPROVALS:

• Top mounted condensing unit.

• Factory pre-engineered capillary tube system with oversized condenser and evaporator to reduce product pull down time and to consistently maintain food safe 33° to 38°F interior cabinet temperature.

• Evaporator - epoxy coated at the time of manufacture to eliminate the potential of corrosion.

ELECTRICAL CHARACTERISTICS:

• Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase - 15 amp dedicated outlet. A cord and plug set to be included.

• A sole use circuit is required.

115/60/1 NEMA-5-15R

Curb mountable units for

Specifications subject to change without notice.

/8"

⁄16"

TR-Series: Deep Reach-In Refrigerator (glass doors)

3 5

/2"

L - 195 cm D - 89 cm

77"

H - 199 cm Door Swing - 61 cm

/4"

/8"

/4"

Rough-In Data

Dimensions Cord

Capacity (inches) NEMA Length Crated Model Doors (Cu. Ft) L D† H* HP Volts PH Amps Config. (feet) Weight TR3R-3G 3 85 76 1/2 34 3/4 78 1/4 3/4 115 1 11.8 5-15 9 867

* Height does not include 5” for castors or 6” for optional legs. † Depth does not include 1 3/8” for door handle.

Specifications subject to change without notice.

Standard Features ____________________________________________________________________________________________

• Oversized and balanced, environmentally friendly 134A refrigeration system - holds food safe 33°F to 38°F.

• Exterior - 300 series stainless steel front, sides, top, bottom and back (the finest stainless available).

• Interior - 300 series stainless steel side walls, back & floor.

• Double pane, “Low-E” thermal insulated glass doors.

• Door locks standard.

• Exterior mounted digital electronic

thermometer with manual defogger.

• Fluorescent interior lighting; patented, integrated door light (IDL) standard.

• Wide door openings.

• Glass condensate pan to prevent

electrolysis.

• (1) interior kit option included per section at no charge. (4) different interior kits available.

• Pilasters and tray slides/shelving factory installed at no charge. Kit selection must be indicated at time of order.

• Magnetic door gaskets.

• Epoxy coated evaporator.

• 4" diameter swivel castors standard

equipment - locking castors provided for front set.

• Hot gas condensate for energy efficiency.

• Positive seal self-closing doors with

factory tested (over 1,000,000 times) lifetime guaranteed door hinges and torsion type closure system.

• Extruded aluminum door frames.

• Foamed-in-place polyurethane high

density cell insulation (CFC free).

• Top mounted unit positioned out of food zone to maximize storage capacity.

• Self-contained system.

• 1 year parts & labor warranty (USA).

• 5 year compressor warranty (USA).

Optional Accessories ______________

❒ 6" stainless steel legs. ❒ Seismic/Flanged legs. ❒ Kit #1 (9 sets of #1 type tray slides). ❒ Kit #2 (rod type 1 set covers 1/2 section). ❒ Kit #3 (6 sets of universal type tray slides). ❒ Kit #4 (3 chrome shelves and shelf supports) ❒ Stainless steel (electro polished) shelves. ❒ Chrome shelves. ❒ Electronic temperature control. ❒ Universal pan slides. ❒ #1 pan slides. ❒ #2 or rod style pan slides. ❒ Curb mountable units. ❒ Export units available - consult factory. ❒ Correctional facility options - consult factory. ❒ Remote cabinets available (contact factory

technical services for BTU information).

KCL

Model Front Right Plan 3D TR3R-3G TFQX62E TFQY99S TFQX62P TFQX623

YEAR

COMPRESSOR

TRUE FOOD SERVICE EQUIPMENT

St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com

Printed in U.S.A.