True TR2RPT-4HS-2S User Manual

TRUE FOOD SERVICE EQUIPMENT, INC.

St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366

(636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com

Specification Series

TR Series

Solid Front Half Doors/

Solid Rear Doors Pass-Thru Model

TR2RPT-4HS-2S

True introduces its latest offering designed specifically

to meet the needs of consultants.

SPECIFICATIONS / FEATURES

CABINET CONSTRUCTION:

• Exterior - 300 series stainless steel front, shroud and doors. 300 series stainless steel exterior ends, rear doors, top, and bottom.

• Interior - 300 series stainless steel interior cabinet side walls, door liner and floor. Construction of liner in accordance with NSF standards.

• Barrel locks standard. Locks keyed alike.

• Digital exterior temperature monitor with manual defogger control, large LED display for quick and easy temperature identification.

• Cabinet mounted on a welded, galvanized frame rail, enamel dipped and baked for permanent bond on all surfaces, provides additional corrosion protection. Frame rail fitted with 4" diameter polyolefin castors, (front castors include brakes).

Solid Front Half Doors/Solid Rear

Doors Deep Pass-Thru Refrigerator

SPECIFICATIONS / FEATURES

DOORS:

• 300 series stainless steel exterior with 300 series stainless steel interior to match cabinet liner. Doors extend full width of cabinet shell. Door gaskets of one piece construction.

• Lifetime guaranteed adjustable torsion type closure system with extruded aluminum and stainless steel supports. The face of each door fitted with a 12" long recessed handle with interlock (lifetime guarantee on all handles and door hardware). Handles are foamed-in-place to insure permanent attachment.

INSULATION:

• Entire cabinet structure and doors insulated using foamed-in-place CFC free polyurethane foam.

SHELVING:

• Heavy gauge full or half height pilasters and tray slides/shelving factory installed at no charge.

• Interior kit must be indicated at time of order. Note: Tray slide sets and shelves can also be ordered individually.

• (1) interior kit option included per section at no charge. (4) different interior kits available. See “optional accessories” section.

LIGHTING:

• Incandescent interior lighting. Light(s) activated by rocker switch mounted above door(s).

REFRIGERATION SYSTEM:

• Oversized refrigeration system factory balanced using CFC free 134A refrigerant.

• Top mounted condensing unit.

• Factory pre-engineered capillary tube system with oversized condenser and evaporator to reduce product pull down time and to consistently maintain food safe 33° to 38°F interior cabinet temperature.

• Evaporator - epoxy coated at the time of manufacture to eliminate the potential of corrosion.

ELECTRICAL CHARACTERISTICS:

• Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase - 15 amp dedicated outlet. A cord and plug set to be included.

• A sole use circuit is required.

Project Name:

Location:

Item #: Qty:

Model #:

❒ TR2RPT-4HS-2S

115/60/1 NEMA 5-20

AIA #

SIS #

Remote cabinets available 14% off list

Consult factory technical service dept. for BTU information.

(condensing units supplied by others).

Printed in

U.S.A.

10/03

YEAR

COMPRESSOR

Exceptions:

APPROVALS:

Curb mountable units for

TR/TA/TG series only. (5% list upcharge)

Specifications subject to change without notice.

TR-Series: Deep Pass-Thru Refrigerator (solid front half door/solid rear doors)

/16

/2"

L - 131 cm D - 95 cm H - 199 cm Door

77"

Swing - 61 cm

Rough-In Data

Dimensions Cord

Capacity (inches) NEMA Length Crated Model Doors (Cu. Ft) L D H* HP Volts PH Amps Config. (feet) Weight TR2RPT-4HS-2S 6 56 51 3/8 37 1/4 78 1/4 3/4 115 1 15.5 5-20 9 N/A

* Height does not include 5” for castors or 6” for optional legs.

Specifications subject to change without notice.

Standard Features____________________________________________________________________________________________

• Oversized and balanced, environmentally friendly 134A refrigeration system - holds food safe 33°F to 38°F.

• Exterior - 300 series stainless steel front, doors, sides, top and bottom (the finest stainless available).

• Interior - 300 series stainless steel side walls, door liner & floor.

• Recessed handles (lifetime guaranteed).

• Door locks standard.

• Exterior mounted digital electronic

thermometer with manual defogger.

• Incandescent interior lighting.

• Wide door openings.

• Glass condensate pan to prevent

electrolysis.

• Magnetic door gaskets.

• Epoxy coated evaporator.

• (1) interior kit option included per section

at no charge. (4) different interior kits available.

KCL

St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com

Model Front Right Plan 3D TR2RPT-4HS-2S TFQX59E TFT017S TFQY96P TFT0173

• Pilasters and tray slides/shelving factory installed at no charge. Kit selection must be indicated at time of order.

• 4" diameter swivel castors standard equipment - locking castors provided for front set.

• Hot gas condensate for energy efficiency.

• Positive seal self-closing doors with factory

tested (over 1,000,000 times) lifetime guaranteed door hinges and torsion type closure system.

• Foamed-in-place polyurethane high density cell insulation (CFC free).

• Top mounted unit positioned out of food zone to maximize storage capacity.

• Self-contained system.

• 1 year parts & labor warranty (USA).

• 5 year compressor warranty (USA).

TRUE FOOD SERVICE EQUIPMENT

Optional Accessories ______________

❒ 6" stainless steel legs. ❒ Seismic/Flanged legs. ❒ Kit #1 (9 sets of #1 type tray slides). ❒ Kit #2 (rod type 1 set covers 1/2 section). ❒ Kit #3 (6 sets of universal type tray slides). ❒ Kit #4 (3 chrome shelves and shelf supports) ❒ Stainless steel (electro polished) shelves. ❒ Chrome shelves.

❒ Metal handle (solid doors only). ❒ Cam lift hinge (solid door models only).

❒ Electronic temperature control. ❒ Universal pan slides. ❒ #1 pan slides. ❒ #2 or rod style pan slides. ❒ Curb mountable units. ❒ Export units available - consult factory. ❒ Correctional facility options - consult factory. ❒ Remote units available (contact factory

technical services for BTU information).

YEAR

COMPRESSOR

Printed in U.S.A.