True TR2RPT-2HG User Manual

TRUE FOOD SERVICE

EQUIPMENT, INC.

2001 East Terra Lane • O’Fallon, Missouri 63366
[phone] • Fax [phone] • [phone] • Intl Fax# [phone]
Parts Dept. (800)424-TRUE • Parts Dept. Fax# [phone] • www.truemfg.com

Project Name:

Location:

Item #: Qty:

Model #:

AIA #

SIS #

Model:

TR2RPT-2HG/2HS-2S

TR Spec Series:

Pass-Thru Combination Front Half Doors/Solid Rear Swing Doors Refrigerator

TR2RPT-2HG/2HS-2S

Designed using the highest



quality materials and components
to provide the user with colder
product temperatures, lower
utility costs and exceptional food
safety.

Oversized, factory balanced,



refrigeration system holds 33°F to
38°F (.5°C to 3.3°C) for the best in
food preservation.

300 series stainless steel exterior



and interior. The very nest
stainless with higher tensile
strength for fewer dents and
scratches.

Equipped with (1) interior kit



option per section, factory
installed. Four (4) dierent
interior kits available.

Positive seal self-closing doors



with 120° stay open feature.
Lifetime guaranteed door hinges.

"Lifetime guaranteed recessed



door handles."

Entire cabinet structure and solid



doors are foamed-in-place using
Ecomate. A new, innovative, high
density, polyurethane insulation
that has zero ozone depletion
potential (ODP) and zero global
warming potential (GWP).

Rough-In Data

Chart dimensions rounded up to the nearest ⁄" (millimeters rounded up to next whole number).

Cabinet Dimensions

(inches)

(mm)

Model Doors

TR2RPT-2HG/2HS-2S

† Depth does not include 1⁄" (35 mm) for glass door handle.
* Height does not include 5" (127 mm) for castors and 1" (26 mm) for system mechanical components.

4 fr/2 bk

51⁄ 37⁄ 78¼ ¾ 115/60/1 15.5 5-20P 9 N/A

1305 956 1988 2.74 N/A

ApprovAls: AvAilAble At:

Printed in U.S.A.

HP Voltage Amps

Specications subject to change without notice.

NEMA

Config.

Cord

Length
(total ft.)

(total m)

Crated

Weight

(lbs.)

(kg)L D† H*

Model:

TR2RPT-2HG/2HS-2S

TR Spec Series:

Pass-Thru Combination Front Half Doors/Solid
Rear Swing Doors Refrigerator

StanDaRD FeatuReS

DESIGN

True’s solid half door pass-thru’s are designed with

•

enduring quality that protects your long term
investment.
Designed using the highest quality materials and

•

components to provide the user with colder product
temperatures, lower utility costs and exceptional
food safety.

REFRIGERATION SYSTEM

Factory engineered, self-contained, capillary tube

•

system using environmentally friendly (CFC free)
134A refrigerant.
Extra large evaporator coil balanced with higher

•

horsepower compressor and large condenser
maintains cabinet temperatures of 33°F to 38°F (.5°C
to 3.3°C) for the best in food preservation.
Sealed, cast iron, self-lubricating evaporator fan

•

motor(s) and larger fan blades give True pass­thru’s a more ecient low velocity, high volume
airow design. This unique design ensures faster
temperature recovery and shorter run times in the
busiest of foodservice environments.
Top mounted refrigeration system with evaporator

•

positioned out of food zone to maximize capacity.
Hot gas condensate for energy eciency.

•

CABINET CONSTRUCTION

Exterior - 300 series stainless steel front, sides, rear

•

and bottom.
Interior - 300 series stainless steel liner and oor with

•

coved corners.
Insulation - entire cabinet structure and solid

•

doors are foamed-in-place using Ecomate. A new,
innovative, high density, polyurethane insulation
that has zero ozone depletion potential (ODP) and
zero global warming potential (GWP).
Welded, heavy duty galvanized frame rail dipped in

•

rust inhibiting enamel paint for corrosion protection
inside and out.
Frame rail tted with 4” (102 mm) diameter stem

•

castors - locks provided on front set.

DOORS

300 series stainless steel exterior and liners to

•

match cabinet interior. Doors open within cabinet
dimensions.
Door locks standard

•

Lifetime guaranteed recessed handles. Each door

•

tted with 12" (305 mm) long recessed handle that
is foamed-in-place with a sheet metal interlock to
ensure permanent attachment.
Positive seal self-closing doors with 120° stay open

•

feature. Lifetime guaranteed door hinges.
Magnetic door gaskets of one piece construction,

•

removable without tools for ease of cleaning.

SHELVING

One (1) factory installed, interior kit option per full

•

section. Four (4) dierent interior kits available (see
Kit Options). Pilasters and tray slides are factory
installed at no charge.

LIGHTING

Incandescent interior lighting - lights activated by

•

rocker switch mounted above top doors, safety
shielded.

MODEL FEATURES

Exterior digital temperature display, available with

•

either °F or °C.
Evaporator epoxy coated to eliminate the potential

•

of corrosion.
NSF-7 compliant for open food product.

•

ELECTRICAL

Unit completely pre-wired at factory and ready

•

for nal connection to a 115/60/1 phase, 20 amp
dedicated outlet. Cord and plug set included.

OPTIONAL FEATURES/ACCESSORIES

Upcharge and lead times may apply.

6" (153 mm) standard legs. ❑
6" (153 mm) seismic/anged legs. ❑
6" (153 mm) stainless steel legs. ❑
Stainless steel rail skirt for use with legs (eld ❑
installed).
Metal door handles (factory installed). ❑
Electronic temperature control (factory installed). ❑
Curb mountable units. ❑
Remote cabinets (condensing unit supplied by ❑
others; system comes standard with 404A expansion
valve and requires R404A refrigerant). Consult
factory technical service department for BTU
information. All remote units must be hard wired
during installation.

KIT OPTIONS

Upcharge applies. Lead time may apply.

Kit #1: Nine (9) sets of #1 type tray slides and pilasters ❑
(factory installed), bottom support of one (1) 18”L x
26”D (458 mm x 661 mm) pan or two (2) 14”L x 18”D
(356 mm x 458 mm) pans.
Kit #2: One (1) set half-section #2 steel rod tray slides ❑
and pilasters (factory installed), rim support of one
(1) 18”L x 26”D (458 mm x 661 mm) pan.
Kit #3: Six (6) sets of universal type tray slides and ❑
pilasters (factory installed), bottom support of one
(1) 18”L x 26”D (458 mm x 661 mm) pan, two (2) 14”L
x 18”D (356 mm x 458 mm) pans or two (2) 12”L x
20”D (305 mm x 508 mm) pans.
Kit #4: Three (3) chrome shelves 23 ❑ ½” x 28 ⁄” (597
mm x 732 mm). Four (4) shelf supports included per
shelf (factory installed); adjustable on 6” (153 mm)
increments. Optional wall mounted shelf support
pilasters (factory installed) with four (4) shelf clips per
shelf available; adjustable on ½ ” (13 mm) increments.
Additional kit option components available ❑
individually. Upcharge applies.

Plan VIew

CUBIC FEET

* Based on ANSI/AHAM HRF-1-2004

One year warranty on all parts

and labor and an additional 4
year warranty on compressor.

56

WARRANTY

(U.S.A. only)

METRIC DIMENSIONS ROUNDED UP TO THE

NEAREST WHOLE MILLIMETER

SPECIFICATIONS SUBJECT TO CHANGE

WITHOUT NOTICE

KCL

Model Elevation Right Plan 3D Back

TR2RPT-2HG/2HS-2S TFQX57E TFT018S TFQX89P TFT0183

TRUE FOOD SERVICE EQUIPMENT

2001 East Terra Lane • O’Fallon, Missouri 63366 • [phone] • Fax [phone] • [phone] • Intl. Fax# [phone] • www.truemfg.com