True T-43 User Manual

TRUE FOOD SERVICE

EQUIPMENT, INC.

2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • [phone]

Fax [phone] • Toll Free [phone] • Intl Fax# [phone]

Parts Dept. (800)424-TRUE • Parts Dept. Fax# [phone] • www.truemfg.com

Project Name:

Location:

Item #: Qty:

Model #:

AIA #

SIS #

Model:

T-43

T-Series:

Reach-In Solid Swing Door Refrigerator

Scan cod e

for vide o

T-43

True’s solid door reach-in’s are



designed with enduring quality
that protects your long term
investment.

Designed using the highest



quality materials and components
to provide the user with colder
product temperatures, lower
utility costs, exceptional food
safety and the best value in
today’s food service marketplace.

Oversized, factory balanced,



refrigeration system holds 33°F to
38°F (.5°C to 3.3°C) for the best in
food preservation.

Stainless steel solid doors and



front. The nest stainless available
with higher tensile strength for
fewer dents and scratches.

Adjustable, heavy duty PVC



coated shelves.

Positive seal self-closing doors.



Lifetime guaranteed door hinges
and torsion type closure system.

Bottom mounted units feature:

”No stoop” lower shelf.



Storage on top of cabinet.



Compressor performs in coolest,



most grease free area of kitchen.

Easily accessible condenser coil



for cleaning.

ROUGH-IN DATA

Model Doors Shelves

Chart dimensions rounded up to the nearest ⁄" (millimeters rounded up to next whole number).

Cabinet Dimensions

(inches)

(mm)

HP Voltage Amps

Specications subject to change without notice.

NEMA

Config.

Cord

Length
(total ft.)

(total m)

Crated

Weight

(lbs.)

(kg)L D H*

T-43 2 6 47 29½ 78⁄ ⁄ 115/60/1 5.8 5-15P 9 400

1194 750 1991 N/A N/A 2.74 182

* Height does not include 5" (127 mm) for castors or 6" (153 mm) for optional legs.

T

RUE

R

EFRIGERATION

MADE IN

U.S.A.

SINCE 1945

2/15

®

Printed in U.S.A.

APPROVALS: AVAILABLE AT:

Model:

T-43

T-Series:

Reach-In Solid Swing Door Refrigerator

STANDARD FEATURES

DESIGN

True’s commitment to using the highest

•

quality materials and oversized refrigeration
systems provides the user with colder product
temperatures, lower utility costs, exceptional
food safety and the best value in today’s food
service marketplace.

REFRIGERATION SYSTEM

Factory engineered, self-contained, capillary

•

tube system using environmentally friendly
(CFC free) 134A refrigerant.
Extra large evaporator coil balanced with higher

•

horsepower compressor and large condenser;
maintains 33°F to 38°F (.5°C to 3.3°C) for the
best in food preservation.
Sealed, cast iron, self-lubricating evaporator

•

fan motors and larger fan blades give True
reach-in’s a more ecient low velocity, high
volume airow design. This unique design
ensures faster temperature recovery and
shorter run times in the busiest of food service
environments.
Bottom mounted condensing unit positioned

•

for easy maintenance. Compressor runs in
coolest and most grease free area of the kitchen.
Allows for storage area on top of unit.

CABINET CONSTRUCTION

Exterior - Stainless steel front. Anodized quality

•

aluminum ends, back and top.
Interior - attractive, NSF approved, clear coated

•

aluminum liner. Stainless steel oor with coved
corners.

Insulation - entire cabinet structure and solid

•

door are foamed-in-place using Ecomate. A high
density, polyurethane insulation that has zero
ozone depletion potential (ODP) and zero global
warming potential (GWP).
Welded, heavy duty steel frame rail, black

•

powder coated for corrosion protection.
Frame rail tted with 4" (102 mm) diameter stem

•

castors - locks provided on front set.

DOORS

Stainless steel exterior with white aluminum

•

liners to match cabinet interior. Doors extend
full width of cabinet shell. Door locks standard.
Lifetime guaranteed recessed door handles.

•

Each door tted with 12" (305 mm) long
recessed handle that is foamed-in-place with
a sheet metal interlock to ensure permanent
attachment.
Positive seal self-closing doors. Lifetime

•

guaranteed door hinges and torsion type
closure system.
Magnetic door gaskets of one piece

•

construction, removable without tools for ease
of cleaning.

SHELVING

Six (6) adjustable, heavy duty PVC coated wire

•

shelves 20 ⁄"L x 22½"D (531 mm x 572 mm).
Four (4) chrome plated shelf clips included per
shelf.
Shelf support pilasters made of same material

•

as cabinet interior; shelves are adjustable on ½"
(13 mm) increments.

LIGHTING

Incandescent interior lighting - safety shielded.

•

Lights activated by rocker switch mounted
above doors.

MODEL FEATURES

Exterior temperature display.

•

Evaporator is epoxy coated to eliminate the

•

potential of corrosion.
NSF-7 compliant for open food product.

•

ELECTRICAL

Unit completely pre-wired at factory and ready

•

for nal connection to a 115/60/1 phase, 15 amp
dedicated outlet. Cord and plug set included.

OPTIONAL FEATURES/ACCESSORIES

Upcharge and lead times may apply.

❑ 6" (153 mm) standard legs.
❑ 6" (153 mm) seismic/anged legs.
❑ Additional shelves.
❑ Half door bun tray racks. Each holds up to

eleven 12"L x 20"D (305 mm x 508 mm) sheet
pans (sold separately).

❑ Full door bun tray racks. Each holds up to

twenty-two 12"L x 20"D (305 mm x 508 mm)
sheet pans (sold separately).

Beginning in October of 2014, True Manufacturing began the

process of changing the standard interior nishes on select

products. The interior liners of these units have changed from the

traditional NSF-approved white aluminum to an NSF-approved clear

coated aluminum that is silver in color. In addition, the traditional
white PVC coated shelves have been switched to a gray PVC coating.
There are no functional dierences created by any of these changes,
the dierence is only in the appearance. The following product lines

are aected by this change: T-Series, TUC, TWT, TSSU, TFP, TPP, TMC,

TRCB. A sticker will be placed on the outside packaging so that units

*CABINET INTERIOR

with this change can be identied in inventory.

PLAN VIEW

47"

(1194 mm)

833/8"

(2118 mm)

77"

(1956 mm)

13/8"

(35 mm)

Three year warranty on all parts

and laborand an additional 2 year

*RESIDENTIAL APPLICATIONS: TRUE assumes no liability for parts or
labor coverage for component failure or other damages resulting
from installation in non-commercial or residential applications.

WARRANTY

warranty on compressor.

(U.S.A. only)

ELEVATION

*

(102 mm)

METRIC DIMENSIONS ROUNDED UP TO THE

NEAREST WHOLE MILLIMETER

SPECIFICATIONS SUBJECT TO CHANGE

783/8"

(1991 mm)

4"

WITHOUT NOTICE

5"

(127 mm)

KCL

TRUE FOOD SERVICE EQUIPMENT

2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • [phone] • Fax [phone] • Toll Free [phone] • Intl. Fax# [phone] • www.truemfg.com

291/2"

(750 mm)

PLAN VIEW

Model Elevation Right Plan 3D Back

T-43

221/4"

(565 mm)

513/4"

(1315 mm)