Troybilt TBLE, 41AJLE-C063 Owner’s Manual

I I__

Operator's Manual

Lawn Edger

TBLE

C_US LISTED

A241

IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY

TROY-BILT LLC, P.O. BOX 361131, CLEVELAND, OH 44136,0019

PiN 769-00416 (8/02)

PRINTED IN USA

THANK YOU

Thank you for buying this quality product. This modern outdoor power tool will provide many hours of useful service. You will find it to be a great labor-saving device. This operator's manual provides you with easy-to- understand operating instructions. Read the whole

manual and follow all the instructions to keep your new

outdoor power tool in top operating condition.

PRODUCT REFERENCES, ILLUSTRATIONS AND

SPECIFICATIONS

All information, illustrations and specifications in this

manual are based on the latest product information

available at the time of printing. We reserve the right to

make changes at any time without notice.

Troy-Bilt® is a registered trademark of

MTD PRODUCTS INC

Rules for Safe Operation ................... 3-6

A. Important Safety Information .............. 3-4

B. Safety and International Symbols ............ 5

C. Know Your Unit .......................... 6

II.

Operating Instructions ..................... 7-8

A. Assembling the coupler ................... 7

B. Holding the Unit with Edger Add-On ......... 8

C. Adjusting Edger Cutting Depth .............. 8

D. Tips for Best Edging Results ................ 8

Ill.

Maintenance and Repair Instructions ........ 9-10

A. Edger Blade Replacement ................. 9

B. Storage ............................... 10

C. Transporting ........................... 10

D. Accessories/Replacement Parts ............ 10

IV. Specifications ............................ 11

SERVICE INFORMATION

Service on this unit both within and after the warranty period should be performed only by an authorized and approved service dealer.

Dial:

• 1-330-558-7220

• 1-866-840-6483 to obtain the listing of the authorized service dealer nearest you.

DO NOT RETURN THE UNIT TO THE RETAILER.

NOTE: PROOF OF PURCHASE WILL BE

REQUIRED FOR WARRANTY SERVICE,

Make sure this manual iscarefully read and understood before starting or operating this equipment.

THIS PRODUCT IS COVERED BY ONE OR MORE US

PATENTS. OTHER PATENTS PENDING.

Read the Operator's Manual(s) and follow all warnings and safety instructions. Failure to do so can result in serious injury to the operator and/or bystanders.

V. Warranty ................................ 12

CONTENTS OF CARTON This unit should consist of the following:

• TBLE Edger Add-On Locking Rod

Hanger

• Operator's Manual Product Registration Card

NOTE: This product has been rated for use on both gas

and electric powerheads.

The purpose of safety symbols is to attract yourattention to

)ossible dangers. The safety symbols, and their explanations, deserve your careful attention and understanding. Thesafety warnings do not by themselves eliminate any danger. The

instructions orwarnings they give are not substitutes for

proper accident prevention measures.

SYMBOL MEANING

SAFETY ALERT SYMBOL: Indicates danger, warning, or caution. Attention is required in

order to avoid serious personal injury. May beused in conjunction with other symbols or pictographs.

NOTE: Advises you of information or instructions vital to

the operation or maintenance of the equipment.

• IMPORTANT SAFETY INFORMATION •

READ ALL INSTRUCTIONS

WARNING: When using the unit, the safety

rules must be followed. For your own Safety J

and that of bystanders, please read these

instructions before operating the unit. Please keep the nstruct ons safe for ater use.

BEFORE OPERATING

• Carefully read and understand the operator's manual of the unit that powers this attachment.

• Read this operating instruction manual carefully. Be

thoroughly familiar with the controls and the proper use

of the equipment. Know how to stop the unit and disengage the controls quickly.

• Do not operate this unit when tired, ill, or under the influence of alcohol, drugs, or medication.

• Never allow children to operate the equipment. Never allow adults unfamiliar with the instructions to use the

unit. Never allow adults to operate the equipment without proper instruction.

• All guards and safety attachments must be installed properly before operating the unit.

• Inspect the unit before use. Ensure the blade is installed correctly and secure.

• Clear the area to be edged before each use. Remove all objects such as rocks, broken glass, nails, wire, or string which can be thrown or become entangled in the edging attachment.

SPECIAL SAFETY WARNINGS FOR GAS

POWERHEADS AND LAWN EDGERS

WARNING: Gasoline is highly flammable, and

its vapors can explode if ignited. Take the

following precautions:

• Store fuel only in containers specifically designed and approved for the storage of such materials.

DANGER: Failure to obey a safety warning will result in serious injury to yourself or to others.

Always follow the safety precautions to reduce

• Always stop the engine and allow it to cool before filling the fuel tank. Never remove the cap of the fuel tank, or

add fuel, when the engine is hot. Never operate the unit without the fuel cap securely in place. Loosen the fuel

tank cap slowly to relieve any pressure in the tank.

• Mix and add fuel in a clean, well-ventilated area outdoors where there are no sparks or flames. Slowly

remove the fuel cap only after stopping engine. Do not smoke while fueling or mixing fuel. Wipe up any spilled fuel from the unit immediately.

• Avoid creating a source of ignition for spilled fuel. Do not start the engine until fuel vapors dissipate.

• Move the unit at least 30 feet (9.1 m) from the fueling source and site before starting the engine. Do not smoke. Keep sparks and open flames away from the area while adding fuel or operating the unit.

• Never start or run the unit inside a closed room or building. Breathing exhaust fumes can kill. Operate this

unit only in a well ventilated area outdoors.

SPECIAL SAFETY WARNINGS FOR ELECTRIC

POWERHEADS AND LAWN EDGERS

• CORD SETS: Make sure your cord set is in good condition. When using a cord set, be sure to use a

cord that is heavy enough to carry the current that your unit will draw. An undersized cord set will cause a drop in line voltage resulting in loss of power and

overheating. See the operator's manual for the unit that will power this add-on for the recommended cord size.

• Inspect all extension cords and the unit power connection periodically. Look closely for deterioration, cuts or cracks in the insulation. Also inspect the connections for damage.

Replace the cords ifany defects or damage appear.

the risk of fire, electric shock, and personal injury.

WARNING: Failure to obey asafety warning can result in injury to yourself and others. Always

follow the safety precautions to reduce the risk of fire, electric shock, and personal injury.

CAUTION: Failure to obey a safety warning may result in property damage or personal

injury to yourself or to others. Always follow the safety precautions to reduce the risk of

fire, electric shock, and personal injury.

WARNING: To reduce the risk of electrical

shock, use only extension cords approved for

outdoor use, such as an extension cord of cord type SW-A, SOW-A, STW-A, STOW-A,SJW-A, SJOW-A, SJTW-W or SJTOW-A.

Extension cords are available from your local retailer. Use only round-jacketed extension

cords approved for outdoor use.

• Prevent disconnection of the lawn edger powerhead

from extension cord during operation by using a plug-

receptacle retaining strap, connector, or by making a knot as shown below:

Extension LawnEdgerr Extension LawnEdger

Cord Cord Cord Cord

• Avoid dangerous environments. Never operate your unit in damp or wet conditions. Moisture is a shock hazard.

• Do not use the unit in the rain. Do not use in or around water.

• Do not handle the plug or unit with wet hands or standing on any wet surfaces.

• Do not leave the unit plugged in when not in use, changing attachments or add-ons, or while being serviced.

WHILE OPERATING

• Keep bystanders, especially children and pets, at least 50 ft (15 m) away.

• Wear safety glasses or goggles that are marked as meeting ANSI Z87.1 standards, and ear/hearing

protection when operating this unit. Wear a face or dust mask if the operation is dusty.

• Wear heavy, long pants, boots, gloves and a long sleeve shirt. Do not wear loose clothing,jewelry, short pants, sandals or go barefoot. Secure hair above shoulder level.

• Use the unit only in daylight or good artificial light.

• Usethe right tool. Only use thistool for the purpose intended.

• Do not force unit. It will do the job better and with less likelihood of injury at a rate for which it was designed.

• Use extreme caution when reversing or pulling the unit

towards you.

• Do not overreach, take extra care when working on steep slopes or inclines. Always keep proper footing and balance.

• Always hold the unit with both hands when operating. Keep a firm grip on both the front and rear handle or grips.

• Keep hands, face, and feet at a distance from all moving parts. Do not touch or try to stop the blade when it is rotating. Do not operate without guards in place.

• Do not operate the engine faster than the speed needed to do the job. Do not run the engine at high

speed when not in use.

• Always stop the engine/motor when operation is delayed or when walking from one location to another.

• Stop the engine/motor for maintenance, repair, to install or remove the blade. The unit must be stopped and the blade no longer turning to avoid injury.

• The blade may become very sharp from use. Always wear heavy gloves when handling, removing, installing or cleaning the blade.

If you strike or become entangled with a foreign object, stop the engine/motor immediately and check for damage. Have any damage repaired before attempting further operations.

Donot operate unit with a bent, cracked or dull blade. Discard blades that are bent, warped, cracked or broken.

Stop the unit IMMEDIATELY if you feel excessive vibration. Vibration is a sign of trouble. Inspect thoroughly for loose nuts, bolts or damage before continuing. Repair or replace affected parts as necessary.

• Stop and switch the unit to off for maintenance, repair, or for changing add-ons or other attachments.

• Keepunit clean of vegetation and other materials. They may become lodged between the blade and gearbox or guard.

• A coasting blade can cause injury while it continues to spin after the unit is stopped. Maintain proper control of

the unit until the blade has completely stopped rotating.

Use only genuine factory replacement parts and

accessories for this unit. These are available from your authorized service dealer. Use of any unauthorized

parts or accessories could lead to serious injury to the user or damage to the unit, and void your warranty.

MAINTENANCE AND STORAGE

• Allow the unit to cool before storing or transporting. Be sure to secure the unit while transporting.

• Store the unit in a locked up and dry or high and dry place to prevent unauthorized use or damage, out of the reach of children.

Clean the blade with a hose and water. Wipe the blade with a light machine oil to prevent rust.

Never douse or squirt the unit with water or any other

liquid. Keep handles dry, clean and free from debris. Clean after each use.

Keep these instructions. Refer to them often and use

them to instruct other users. If you loan someone this unit, also loan them these instructions.

Only qualified personnel should perform any repairs or maintenance procedures that are not described in this manual.

Check shear bolts, engine mounting bolts and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition.

Inside a building store the machine away from ignition

sources. Allow the engine to cool before storing in any enclosure.

Always refer to the Operator's Manual instructions for important details if the lawn edger is to be stored for an extended period.

Do not attempt to repair the machine unless you have the proper tools, and instructions for disassembly and repair of the machine.

SAVE THESE INSTRUCTIONS

+ 9 hidden pages