Troybilt TBTB, 41AJTB-C063 Owner’s Manual

®

O

I I__

Operator's Manual

Turbo Blower

TBTB

C_US LISTED

A241

IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY

TROY-BILT LLC, P.O. BOX 361131, CLEVELAND, OH 44136,0019

PiN 769-00426 (9/02)

PRINTED IN USA

THANK YOU

Thank you for buying this quality product. This modern
outdoor power tool will provide many hours of useful
service. You will find it to be a great labor-saving device.
This operator's manual provides you with easy-to-
understand operating instructions. Read the whole

manual and follow all the instructions to keep your new

outdoor power tool in top operating condition.

PRODUCT REFERENCES, ILLUSTRATIONS AND

SPECIFICATIONS

All information, illustrations and specifications in this

manual are based on the latest product information

available at the time of printing. We reserve the right to

make changes at any time without notice.

Copyright @2002 MTD SOUTHWEST INC
All Rights Reserved.

Troy-Bilt@ is a registered trademark of

MTD PRODUCTS INC

SERVICE INFORMATION

Service on this unit both within and after the warrant
period should be performed only by an authorized

and approved service dealer.

Dial:

• 1-330-558-7220

Or

• 1-866-840-6483 to obtain the listing of the
authorized service dealer nearest you.

DO NOT RETURN THE UNIT TO THE RETAILER.

NOTE: PROOF OF PURCHASE WILL BE

REQUIRED FOR WARRANTY SERVICE.

Rules for Safe Operation ................... 3-6

A. Important Safety Information .............. 3-4

B. Safety and International Symbols ............ 5

C. Know Your Unit .......................... 6

II. Operating Instructions ..................... 7-9

A. Assembling the coupler .................... 7

B. Interchanging Nozzles ................... 8-9

Ill.

Maintenance and Repair Instructions .......... 10

A. Storage ............................... 10

B. Transporting ........................... 10

C. Accessories/Replacement Parts ............ 10

IV. Specifications ............................ 11

V. Warranty ................................ 12

CONTENTS OF CARTON

This unit should consist of the following:

TBTB Turbo Blower Add-On

Flare Nozzle

Concentrator Nozzle

Hanger

Operator's Manual

Product Registration Card

NOTE: This product has been rated for use on both gas

and electric powerheads.

Make sure this manual iscarefully read and understood
before starting or operating this equipment.

THIS PRODUCTISCOVEREDBYONE OR MOREUS

PATENTS.OTHERPATENTSPENDING.

Read the Operator's Manual(s) and follow all

warnings and safety instructions. Failure to do

so can result in serious injury to the operator
and/or bystanders.

2

The purpose of safetysymbols is to attract your attention to

)ossible dangers. The safety symbols, and their explanations,
deserve your careful attention and understanding. Thesafety
warnings do not by themselves eliminate any danger. The

instructions orwarnings they give are not substitutes for

proper accident prevention measures.

SYMBOL MEANING

SAFETY ALERT SYMBOL: Indicates danger,
warning, or caution. Attention is required in order
to avoid serious personal injury. May be used in
conjunction with other symbols or pictographs.

NOTE: Advises you of information or instructions vital to

the operation or maintenance of the equipment.

• IMPORTANT SAFETY INFORMATION •

A

DANGER: Failure to obey a safety warning
will result in serious injury to yourself or to

others. AIways follow the safety precautions
to reduce the risk of fire, electric shock, and

personal injury.
WARNING: Failureto obey a safety warning

can result in injury to yourself and others. Always
follow the safety precautions to reduce the risk
of fire, electric shock, and personal injury.

CAUTION: Failure to obey a safety warning
may result in property damage or personal
injury to yourself or to others. Always follow
the safety precautions to reduce the risk of
fire, electric shock, and personal injury.

READ ALL INSTRUCTIONS

WARNING: When using the unit, the safety
rules must be followed. For your own safety [

and that of bystanders, please read these
instructions before operating the unit. Please
keep the nstruct ons safe for ater Use.

BEFORE OPERATING

• Carefully read and understand the operator's manual
of the unit that powers this attachment.

• Read this operating instruction manual carefully. Be

thoroughly familiar with the controls and the proper use

of the equipment. Know how to stop the unit and
disengage the controls quickly.

• Do not operate this unit when tired, ill, or under the
influence of alcohol, drugs, or medication.

• Never allow children to operate the equipment. Never
allow adults unfamiliar with the instructions to use the

unit. Never allow adults to operate the equipment
without proper instruction.

• All guards and safety attachments must be installed
properly before operating the unit.

• Inspect the unit before use.

• Keep the air intake opening clear of debris.

• Clear the area before each use. Remove all objects
such as rocks, broken glass, nails, wire, or string which

can be thrown or become entangled in the attachment.

SPECIAL SAFETY WARNINGS FOR GAS

POWERHEADS AND TURBO BLOWERS

WARNING: Gasoline is highly flammable, and
its vapors can explode if ignited. Take the

following precautions:

• Store fuel only in containers specifically designed and
approved for the storage of such materials.

• Always stop the engine and allow it to cool before filling
the fuel tank. Never remove the cap of the fuel tank, or
add fuel, when the engine is hot. Never operate the unit
without the fuel cap securely in place. Loosen the fuel
tank cap slowly to relieve any pressure in the tank.

• Mix and add fuel in a clean, well-ventilated area
outdoors where there are no sparks or flames. Slowly

remove the fuel cap only after stopping engine. Do not
smoke while fueling or mixing fuel. Wipe up any spilled

fuel from the unit immediately.

• Avoid creating a source of ignition for spilled fuel. Do
not start the engine until fuel vapors dissipate.

• Move the unit at least 30 feet (9.1 m) from the fueling
source and site before starting the engine. Do not

smoke. Keep sparks and open flames away from the
area while adding fuel or operating the unit.

• Never start or run the unit inside a closed room or
building. Breathing exhaust fumes can kill. Operate this

unit only in a well ventilated area outdoors.

SPECIAL SAFETY WARNINGS FOR ELECTRIC

POWERHEADS AND TURBO BLOWERS

WARNING: To reduce the risk of electrical

shock, use only extension cords approved for

outdoor use, such as an extension cord of
cord type SW-A, SOW-A, STW-A, STOW-A,

SJW-A, SJOW-A, SJTW-W or SJTOW-A.
Extension cords are available from your local

retailer. Use only round-jacketed extension

cords approved for outdoor use.

• CORD SETS: Make sure your cord set is in good
condition. When using a cord set, be sure to use a
cord that is heavy enough to carry the current that your
unit will draw. An undersized cord set will cause a drop
in line voltage resulting in loss of power and
overheating. See the operator's manual for the unit that
will power this add-on for the recommended cord size.

3

• Inspect all extension cords and the unit power
connection periodically. Look closely for deterioration,

cuts or cracks in the insulation. Also inspect the
connections for damage. Replace the cords if any
defects or damage appear.

• Prevent disconnection of the turbo blower powerhead

from extension cord during operation by using a plug-

receptacle retaining strap, connector, or by making a
knot as shown below:

Extension TurboBlower Extension TurboBlower

Cord Cord Cord Cord

• Avoid dangerous environments. Never operate your
unit in damp or wet conditions. Moisture is a shock

hazard.

• Do not use the unit in the rain. Do not use in or around
water.

• Do not handle the plug or unit with wet hands or
standing on any wet surfaces.

• Do not leave the unit plugged in when not in use,
changing attachments or add-ons, or while being

serviced.

WHILE OPERATING

• Keep bystanders, especially children and pets, at least
50 ft (15 m) away.

• Wear safety glasses or goggles that are marked as
meeting ANSI Z87.1 standards, and ear/hearing

protection when operating this unit. Wear a face or
dust mask if the operation is dusty.

• Wear heavy, long pants, boots, gloves and a long
sleeve shirt. Do not wear loose clothing, jewelry, short
pants, sandals or go barefoot. Secure hair above

shoulder level.

• Use the unit only in daylight or good artificial light.

• Use the right tool. Only use this tool for the purpose
intended.

• Do not operate the engine faster than the speed
needed to do the job. Do not run the engine at high

speed when not in use.

• Always stop the engine/motor when operation is
delayed or when walking from one location to another.

.• If you strike or become entangled with a foreign object,

stop the engine/motor immediately and check for
damage. Have any damage repaired before attempting
further operations.

Stop the unit IMMEDIATELY if you feel excessive
vibration. Vibration is a sign of trouble. Inspect
thoroughly for loose nuts, bolts or damage before
continuing. Repair or replace affected parts as
necessary.

Stop and switch the unit to off for maintenance, repair,
or for changing add-ons or other attachments. The unit

must be stopped and the impeller no longer turning to
avoid injury.

Use only genuine factory replacement parts and

accessories for this unit. These are available from
your authorized service dealer. Use of any unauthorized

parts or accessories could lead to serious injury to the
user or damage to the unit, and void your warranty.

OTHER SAFETY WARNINGS

• Allow the unit to cool before storing or transporting. Be
sure to secure the unit while transporting.

• Store the unit in a locked up and dry or high and dry
place to prevent unauthorized use or damage, out of
the reach of children.

Never douse or squirt the unit with water or any other
liquid. Keep handles dry, clean and free from debris.
Clean unit and labels with a damp sponge. Clean after

each use.

Keep these instructions. Refer to them often and use
them to instruct other users. If you loan someone this

unit, also loan them these instructions.
Only qualified personnel should perform any repairs

or maintenance procedures that are not described
in this manual.

• Do not overreach, take extra care when working on
steep slopes or inclines. Always keep proper footing

and balance.

• Always hold the unit with both hands when operating.
Keep a firm grip on both the front and rear handle or
grips.

• Keep air intake opening clear of debris while blowing.

• Never operate the unit without the a nozzle installed.

• Never attempt to clear a clogged nozzle with the
engine/motor running.

• Do not force unit. It will do the job better and with less
likelihood of injury at a rate for which it was designed.

4

Check engine mounting bolts and other bolts at
frequent intervals for proper tightness to be sure the

equipment is in safe working condition.

Inside a building store the machine away from ignition

sources. Allow the engine to cool before storing in any
enclosure.

Always refer to the Operator's Manual instructions for
important details if the unit is to be stored for an
extended period.

Do not attempt to repair the machine unless you have
the proper tools, and instructions for disassembly and
repair of the machine.

SAVE THESE INSTRUCTIONS