CLP4416
Table of contents
Loading...
Instruction Handbook
Basic
CLP 4416 | 4524
Colour Printer
Contents
1 Installation
Unpacking the printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Installing the Toner Container and Waste Toner Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
Making the connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7
2 Machine Parts
Components at the Front of the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Components at the Left of the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Internal Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Components at the Rear of the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
3 Printing Operation
Loading Printer Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Printing from Application Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
4 Maintenance
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Toner Container Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
Cleaning the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
Replacing the Waste Toner Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15
5 Troubleshooting
General Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Print Quality Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
Error Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7
Clearing Paper Jams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-14
6 Specifications
BASIC OPERATION GUIDE i
Contents
ii BASIC OPERATION GUIDE
Legal and Safety Information
CAUTION: NO LIABILITY IS ASSUMED FOR ANY DAMAGE CAUSED
BY IMPROPER INSTALLATION.
Notice on Software
SOFTWARE USED WITH THIS PRINTER MUST SUPPORT THE
PRINTER'S EMULATION MODE. The printer is factory-set to emulate the
PCL. The emulation mode can be changed by following the procedures
described in The Using the Operator Panel in the Advanced Operation
Guide.
Notice
The information in this guide is subject to change without notification.
Additional pages may be inserted in future editions. The user is asked to
excuse any technical inaccuracies or typographical errors in the present
edition.
No responsibility is assumed if accidents occur while the user is following
the instructions in this guide. No responsibility is assumed for defects in the
printer's firmware (contents of its read-only memory).
This guide, any copyrightable subject matter sold or provided with or in
connection with the sale of the page printer, are protected by copyright. All
rights are reserved. Copying or other reproduction of all or part of this
guide, any copyrightable subject matter without the prior written consent of
Kyocera Mita Corporation is prohibited. Any copies made of all or part of
this guide, any copyrightable subject must contain the same copyright
notice as the material from which the copying is done.
Regarding Tradenames
PRESCRIBE is a registered trademark of Kyocera Corporation. KPDL is
trademark of Kyocera Corporation.
Hewlett-Packard, PCL, and PJL are registered trademarks of HewlettPackard Company. Centronics is a trade name of Centronics Data
Computer Inc. PostScript is a registered trademark of Adobe Systems
Incorporated. Macintosh is a registered trademark of Apple Computer, Inc.
Microsoft, Windows, and Windows NT are registered trademarks of
Microsoft Corporation. PowerPC and Microdrive are trademarks of
International Business Machines Corporation. CompactFlash is a
trademark of SanDisk Corporation. ENERGY STAR is a U.S. registered
mark. All other brand and product names are registered trademarks or
trademarks of their respective companies.
BASIC OPERATION GUIDE iii
This product uses PeerlessPrintXL to provide the HP LaserJet compatible
PCL 6 language emulation. PeerlessPrintXL is a trademark of The
Peerless Group, Redondo Beach, CA 90278, U.S.A.
This product was developed using the Tornado™ Real Time Operating
System and Tools from Wind River Systems.
This product contains UFST™ and MicroType® from Agfa
Monotype Corporation.
iv BASIC OPERATION GUIDE
License Agreements
IBM Program License Agreement
THE DEVICE YOU HAVE PURCHASED CONTAINS ONE OR MORE
SOFTWARE PROGRAMS (“PROGRAMS”) WHICH BELONG TO
INTERNATIONAL BUSINESS MACHINES CORPORATION (“IBM”). THIS
DOCUMENT DEFINES THE TERMS AND CONDITIONS UNDER WHICH
THE SOFTWARE IS BEING LICENSED TO YOU BY IBM. IF YOU DO
NOT AGREE WITH THE TERMS AND CONDITIONS OF THIS LICENSE,
THEN WITHIN 14 DAYS AFTER YOUR ACQUISITION OF THE DEVICE
YOU MAY RETURN THE DEVICE FOR A FULL REFUND. IF YOU DO
NOT SO RETURN THE DEVICE WITHIN THE 14 DAYS, THEN YOU
WILL BE ASSUMED TO HAVE AGREED TO THESE TERMS AND
CONDITIONS.
The Programs are licensed not sold. IBM, or the applicable IBM country
organization, grants you a license for the Programs only in the country
where you acquired the Programs. You obtain no rights other than those
granted you under this license.
The term “Programs” means the original and all whole or partial copies of
it, including modified copies or portions merged into other programs. IBM
retains title to the Programs. IBM owns, or has licensed from the owner,
copyrights in the Programs.
1. License
Under this license, you may use the Programs only with the device on
which they are installed and transfer possession of the Programs and the
device to another party.
If you transfer the Programs, you must transfer a copy of this license and
any other documentation to the other party. Your license is then
terminated. The other party agrees to these terms and conditions by its first
use of the Program.
You may not:
1 use, copy, modify, merge, or transfer copies of the Program except
as provided in this license;
2 reverse assemble or reverse compile the Program; or
3 sublicense, rent, lease, or assign the Program.
2. Limited Warranty
The Programs are provided “AS IS.”
THERE ARE NO OTHER WARRANTIES COVERING THE PROGRAMS
(OR CONDITIONS), EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE.
BASIC OPERATION GUIDE v
Some jurisdictions do not allow the exclusion of implied warranties, so the
above exclusion may not apply to you.
3. Limitation of Remedies
IBM's entire liability under this license is the following;
For any claim (including fundamental breach), in any form, related in any
way to this license, IBM's liability will be for actual damages only and will
be limited to the greater of:
1 the equivalent of U.S. $25,000 in your local currency; or
2 IBM's then generally available license fee for the Program
This limitation will not apply to claims for bodily injury or damages to real
or tangible personal property for which IBM is legally liable.
IBM will not be liable for any lost profits, lost savings, or any incidental
damages or other economic consequential damages, even if IBM, or its
authorized supplier, has been advised of the possibility of such damages.
IBM will not be liable for any damages claimed by you based on any third
party claim. This limitation of remedies also applies to any developer of
Programs supplied to IBM. IBM's and the developer's limitations of
remedies are not cumulative. Such developer is an intended beneficiary of
this Section. Some jurisdictions do not allow these limitations or
exclusions, so they may not apply to you.
4. General
You may terminate your license at any time. IBM may terminate your
license if you fail to comply with the terms and conditions of this license. In
either event, you must destroy all your copies of the Program. You are
responsible for payment of any taxes, including personal property taxes,
resulting from this license. Neither party may bring an action, regardless of
form, more than two years after the cause of action arose. If you acquired
the Program in the United States, this license is governed by the laws of
the State of New York. If you acquired the Program in Canada, this license
is governed by the laws of the Province of Ontario. Otherwise, this license
is governed by the laws of the country in which you acquired the Program.
Typeface Trademark Acknowledgement
All resident fonts in this printer are licensed from Agfa Corporation.
Helvetica, Palatino and Times are registered trademarks of Linotype-Hell
AG. ITC Avant Garde Gothic, ITC Bookman, ITC ZapfChancery and ITC
Zapf Dingbats are registered trademarks of International Typeface
Corporation.
vi BASIC OPERATION GUIDE
Agfa Monotype License Agreement
1 “Software” shall mean the digitally encoded, machine readable,
scalable outline data as encoded in a special format as well as the
UFST Software.
2 You agree to accept a non-exclusive license to use the Software to
reproduce and display weights, styles and versions of letters,
numerals, characters and symbols (“Typefaces”) solely for your own
customary business or personal purposes at the address stated on
the registration card you return to Agfa Japan. Under the terms of
this License Agreement, you have the right to use the Fonts on up to
three printers. If you need to have access to the fonts on more than
three printers, you need to acquire a multi-user license agreement
which can be obtained from Agfa Japan. Agfa Japan retains all
rights, title and interest to the Software and Typefaces and no rights
are granted to you other than a License to use the Software on the
terms expressly set forth in this Agreement.
3 To protect proprietary rights of Agfa Japan, you agree to maintain the
Software and other proprietary information concerning the Typefaces
in strict confidence and to establish reasonable procedures
regulating access to and use of the Software and Typefaces.
4 You agree not to duplicate or copy the Software or Typefaces, except
that you may make one backup copy. You agree that any such copy
shall contain the same proprietary notices as those appearing on the
original.
5 This License shall continue until the last use of the Software and
Typefaces, unless sooner terminated. This License may be
terminated by Agfa Japan if you fail to comply with the terms of this
License and such failure is not remedied within thirty (30) days after
notice from Agfa Japan. When this License expires or is terminated,
you shall either return to Agfa Japan or destroy all copies of the
Software and Typefaces and documentation as requested.
6 You agree that you will not modify, alter, disassemble, decrypt,
reverse engineer or decompile the Software.
7 Agfa Japan warrants that for ninety (90) days after delivery, the
Software will perform in accordance with Agfa Japan-published
specifications, and the diskette will be free from defects in material
and workmanship. Agfa Japan does not warrant that the Software is
free from all bugs, errors and omissions.
8 THE PARTIES AGREE THAT ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF
FITNESS FOR A PARTICULAR PURPOSE AND
MERCHANTABILITY, ARE EXCLUDED.
9 Your exclusive remedy and the sole liability of Agfa Japan in
connection with the Software and Typefaces is repair or replacement
of defective parts, upon their return to Agfa Japan.
10 IN NO EVENT WILL AGFA JAPAN BE LIABLE FOR LOST
PROFITS, LOST DATA, OR ANY OTHER INCIDENTAL OR
CONSEQUENTIAL DAMAGES, OR ANY DAMAGES CAUSED BY
BASIC OPERATION GUIDE vii
ABUSE OR MISAPPLICATION OF THE SOFTWARE AND
TYPEFACES.
11 New York, U.S.A. law governs this Agreement.
12 You shall not sublicense, sell, lease, or otherwise transfer the
Software and/or Typefaces without the prior written consent of Agfa
Japan.
13 Use, duplication or disclosure by the Government is subject to
restrictions as set forth in the Rights in Technical Data and Computer
Software clause at FAR 252-227-7013, subdivision (b)(3)(ii) or
subparagraph (c)(1)(ii), as appropriate. Further use, duplication or
disclosure is subject to restrictions applicable to restricted rights
software as set forth in FAR 52.227-19 (c)(2).
14 YOU ACKNOWLEDGE THAT YOU HAVE READ THIS
AGREEMENT, UNDERSTAND IT, AND AGREE TO BE BOUND BY
ITS TERMS AND CONDITIONS. NEITHER PARTY SHALL BE
BOUND BY ANY STATEMENT OR REPRESENTATION NOT
CONTAINED IN THIS AGREEMENT. NO CHANGE IN THIS
AGREEMENT IS EFFECTIVE UNLESS WRITTEN AND SIGNED
BY PROPERLY AUTHORIZED REPRESENTATIVES OF EACH
PARTY. BY OPENING THIS DISKETTE PACKAGE, YOU AGREE
TO ACCEPT THE TERMS AND CONDITIONS OF THIS
AGREEMENT.
viii BASIC OPERATION GUIDE
Compliance and Conformity
Interface connectors
IMPORTANT: Be sure to power off the printer before connecting or
disconnecting an interface cable. For protection against static electricity
discharge to the printer's internal electronics through the interface
connector(s), cover any interface connector that is not in use with the
protective cap supplied.
BASIC OPERATION GUIDE ix
NOTE: Use shielded interface cables.
Cautionary Labels
The printer bears any of the following labels.
For Europe, Asia, and other countries
(except U.S.A. and Canada)
Ozone concentration
The printers generate ozone gas (O3) which may concentrate in the place
of installation and cause an unpleasant smell. To minimize the
concentration of ozone gas to less than 0.1 ppm, we recommend you not
to install the printer in a confined area where ventilation is blocked.
x BASIC OPERATION GUIDE
CE Marking Directive
According to Council Directive 89/336/EEC and 73/23/EEC
UTAX GmbH
Ohechaussee 235
22848 Norderstedt, Germany
Declares that the product
Product name: Color Page Printer
Model number: CLP 4416/4524 (as tested with enhancement
optional units; Duplex unit DU-300/DU-301, Paper Feeder PF-60)
Conforms to the following product specifications:
EN 55 022: 1998 Class B
EN 61 000-3-2: 2000
EN 61 000-3-3: 1995
EN 55 024: 1998
EN 60 950: 2000
BASIC OPERATION GUIDE xi
The manufacturer and its merchandising companies retain the following
technical documentation in anticipation of the inspection that may be
conducted by the authorities concerned.
User’s instruction that conforms to the applicable specifications.
Technical drawings.
Descriptions of procedures that guarantee conformity.
Other technical information.
xii BASIC OPERATION GUIDE
ISO 7779
Disclaimer
Maschinenlärminformationsverordnung 3. GSGV, 18.01.1991: Der
höchste Schalldruckpegel beträgt 70 dB (A) oder weniger gemäß ISO
7779.
UTAX GmbH will not be liable to customers or any other person or entity
for any loss or damage caused or alleged to be caused directly or indirectly
by equipment sold or furnished by us, including but not limited to, any
interruption of service, loss of business or anticipatory profits, or
consequential damages resulting from the use or operation of the
equipment or software.
Energy Star
Initial Auto Sleep Setting 15 minutes (60 minutes) 15 minutes (60 minutes)
Power consumption in
Auto Sleep
®
As an ENERGY STAR Partner, we have determined that this
product meets the ENERGY STAR guidelines for energy
efficiency.
The basic objective of the ENERGY STAR Program is to reduce environmental
pollution by encouraging the manufacture and sale of equipment that uses
energy more efficiently.
This printer is equipped with a sleep timer function that conforms with the
standards of the E
reduce the amount of electrical power consumed by the printer. For
maximum power savings, turn off the printer’s power supply when not
using the printer for extended periods of time.
For details on the sleep timer function and printer power consumption,
refer to this manual.
Initial settings of the sleep timer function and power saved using the sleep
timer function:
NERGY STAR Program. This function makes it possible to
CLP 4416 CLP 4524
16W (45W) [for Europe,
Asia, and other countries]
21W (70W) [for Europe,
Asia, and other countries]
( ): ENERGY STAR program guideline
BASIC OPERATION GUIDE xiii
Group for Energy Efficient Appliances (GEEA)
The goal of GEEA is efficient use of energy. This
product has a high-efficiency profile and meets the
criteria for receiving the GEEA-Label.
CLP 4416 CLP 4524
Initial Auto Sleep Setting 15 minutes (30 minutes) 15 minutes (30 minutes)
Power Consumption
- Power off
- Auto Sleep
( ): GEEA criteria
0W (1W)
16W (30W)
0W (1W)
21W (30W)
xiv BASIC OPERATION GUIDE
Installation Precautions
Environment
CAUTION: Avoid placing the printer on or in locations which are unstable
or not level. Such locations may cause the printer to fall. This type of
situation presents a danger of personal injury or damage to the printer.
Avoid locations with humidity or dust and dirt. If dust or dirt becomes
attached to the power plug, clean the plug to avoid the danger of fire or
electrical shock.
Avoid locations near radiators, heaters, or other heat sources, or locations
near flammable items, to avoid the danger of fire.
To keep the printer cool and facilitate changing of parts and maintenance,
allow access space as shown below. Leave adequate space, especially
around the side cover, to allow air to be properly ventilated from the printer.
Top: 75 cm
(29-1/2 inches)
Left: 40 cm
(15-3/4 inches)
Other Precautions
Right: 25 cm
(10 inches)
Rear: 25 cm
(10 inches)
([40 cm (15-3/4 inches)
when the optional face-up
output tray is installed]
Front: 60 cm
(23-5/8 inches)
• Adverse environmental conditions may affect the safe operation and
performance of the printer. Install in an air-conditioned room
(recommended room temperature: around 23 °C, humidity: around
60% RH) and avoid the following locations when selecting a site for
the printer.
- Avoid locations near a window or with exposure to direct sunlight.
- Avoid locations with vibrations.
- Avoid locations with drastic temperature fluctuations.
- Avoid locations with direct exposure to hot or cold air.
- Avoid poorly ventilated locations.
• If the flooring is of a soft material, it may be damaged by the casters
when this product is moved after installation.
BASIC OPERATION GUIDE xv
Power Supply/Grounding the Printer
WARNING: Do not use a power supply with a voltage other than that
specified. Avoid multiple connections in the same outlet. These types of
situations present a danger of fire or electrical shock.
Plug the power cord securely into the outlet. If metallic objects come in
contact with the prongs on the plug, it may cause a fire or electric shock.
Always connect the printer to an outlet with a ground connection to avoid
the danger of fire or electrical shock in case of an electric short. If an earth
connection is not possible, contact your service representative.
xvi BASIC OPERATION GUIDE
Other Precautions
Handling of Plastic Bags
Connect the power plug to the closest outlet possible to the printer.
WARNING: Keep the plastic bags that are used with the printer away
from children. The plastic may cling to their nose and mouth causing
suffocation.
BASIC OPERATION GUIDE xvii
Precautions for Use
Cautions when Using the Printer
• Do not place metallic objects or containers with water (flower vases,
flower pots, cups, etc.) on or near the printer. This type of situation
presents a danger of fire or electrical shock should they fall inside.
• Do not remove any of the covers from the printer as there is a danger
of electrical shock from high voltage parts inside the printer.
• Do not damage, break or attempt to repair the power cord. Do not
place heavy objects on the cord, pull it, bend it unnecessarily or cause
any other type of damage.These types of situations present a danger
of fire or electrical shock.
• Never attempt to repair or disassemble the printer or its parts as there
is a danger of fire, electrical shock or damage to the laser. If the laser
beam escapes, there is a danger of it causing blindness.
• If the printer becomes excessively hot, smoke appears from the
printer, there is an odd smell, or any other abnormal situation occurs,
there is a danger of fire or electrical shock. Turn the power switch OFF
({) immediately, remove the power plug from the outlet and contact
your service representative.
• If anything harmful (paper clips, water, other fluids, etc.) falls into the
printer, turn the power switch OFF ({) immediately. Next, remove the
power plug from the outlet to avoid the danger of fire or electrical
shock. Then contact your service representative.
• Do not remove or connect the power plug with wet hands, as there is
a danger of electrical shock.
• Always contact your service representative for maintenance or repair
of internal parts.
• Do not pull the power cord when removing it from the outlet. If the
power cord is pulled, the wires may become broken and there is a
danger of fire or electrical shock. (Always grasp the power plug when
removing the power cord from the outlet.)
• Always remove the power plug from the outlet when moving the
printer. If the power cord is damaged, there is a danger of fire or
electrical shock.
• If the printer will not be used for a short period of time (overnight, etc.),
turn the power switch OFF ({). If it will not be used for an extended
period of time (vacations, etc.), remove the power plug from the outlet
for safety purposes during the time the printer is not in use.
• For safety purposes. Always remove the power plug from the outlet
when performing cleaning operations.
• If dust accumulates within the printer, there is a danger of fire or other
trouble. It is therefore recommended that you consult with your service
representative in regard to cleaning of internal parts. This is
particularly effective if accomplished prior to seasons of high humidity.
Consult with your service representative in regard to the cost of
cleaning the internal parts of the printer.
xviii BASIC OPERATION GUIDE
Other Precautions
• Do not place heavy objects on the printer or cause other damage to
the printer.
• Do not open the top/left/rear cover, turn off the main switch, or pull out
the power plug during printing.
• During printing, some ozone is released, but the amount does not
cause any ill effect to one's health. If, however, the printer is used over
a long period of time in a poorly ventilated room or when printing an
extremely large number of copies, the smell may become unpleasant.
To maintain the appropriate environment for print work, it is suggested
that the room be properly ventilated.
• Do not touch electrical parts, such as connectors or printed circuit
boards. They could be damaged by static electricity.
• Do not attempt to perform any operations not explained in this
handbook.
• If the printer will not be used for an extended period of time, remove
the paper from the cassette, return it to its original package and reseal
it.
CAUTION: Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
Cautions for Toner Handling
• Do not incinerate toner and toner containers. Dangerous sparks may
cause burn.
• Never open the toner container.
• Do not inhale the toner.
• If you get toner on your hands, Do not rub your eyes or touch your
mouth. Wash the toner from your hands.
• For the disposal of the old toner container, consult your service
technician or dispose of the toner or toner containers in accordance
with Federal, State and Local rules and regulations.
BASIC OPERATION GUIDE xix
For More Information...
Item Description
Installation Guide (paper manual) Describes the printer setup procedure.
Basic Operation Guide (this manual) Guides you through topics concerning the operations and
maintenance of the printer.
The following documents are stored in the CD-ROM as PDF documents.
Advanced Operation Guide Guides you through topics concerning loading paper, using the
operator panel as well as describing the options available and the
specifications for the physical interface.
KX Printer Drivers Operation Guide Describes how to install and set the printer driver.
Technical Reference for PRESCRIBE
Command
Command Reference for PRESCRIBE
Command
s
s
PRESCRIBE is the native language of the Kyocera printers. This
Technical Reference contains the information about how the
printing is performed using the PRESCRIBE commands as well as
the font and emulation description. Also included is a list of
permanent parameters and their explanation needed when
customizing your printer.
Gives a detailed explanation of the PRESCRIBE command syntax
and parameters with the aid of print examples.
About the Operation Guide
This Operation Guide has the following chapters:
Chapter 1 - Installation
This chapter describes how to install the printer.
Chapter 2 - Machine Parts
This chapter explains the names of parts.
Chapter 3 - Printing Operation
This chapter explains how to print from your workstation.
Chapter 4 - Maintenance
This chapter explains how to replace the toner container and how to care
for your printer.
Chapter 5 - Troubleshooting
This chapter explains how to handle printer problems that may occur, such
as paper jams.
Chapter 6 - Specifications
This chapter lists the printer’s specifications.
xx BASIC OPERATION GUIDE
Conventions
Convention Description Example
This manual uses the following conventions.
Italic Typeface Used to emphasise a key word,
phrase or message. In addition,
references to other publications
are displayed in italic typeface.
Notes Used to provide additional or
useful information about a
function or feature. Can also
contain references to other
publications.
Important Use to provide important
information.
Caution Cautions are statements that
suggest mechanical damage as
a result of an action.
Warning Used to alert users to the
possibility of personal injury.
A Completed message displays and the
Copy Basic screen returns.
NOTE: For information about storing the
pin, refer to step 10.
IMPORTANT: Ensure paper is not
folded, curled, or damaged.
CAUTION: Do not pull the cassette out
when holding the front of the machine.
WARNING: High voltage is present
in the charger section.
BASIC OPERATION GUIDE xxi
xxii BASIC OPERATION GUIDE
1 Installation
This chapter contains explanations on the following topics:
• Unpacking the printer ................................................... 1-2
• Installing the Toner Container and Waste Toner Box ... 1-4
• Making the connections................................................ 1-7
BASIC OPERATION GUIDE 1-1
Installation
Unpacking the printer
1
Unpack the printer and all its included components.
Be sure to hold the right and left
sides of the printer when carrying
it, as shown in the illustration.
European/Pacific
countries
2
U.S.A./Canada
Remove the packing cover and all packing tapes.
Packing cover
Packing tape
1-2 BASIC OPERATION GUIDE
Loading...