Triumph Tiger 800 XR LRH, Tiger 1200 XR, Tiger 1200 XC, Tiger 1200 XR LRH, Tiger XCA Fitting Instructions Manual

1 of 10

English

Publication part number A9900585 issue 11
© Triumph Designs Ltd. 2017

Fitting Instructions:

Tiger XR, Tiger XR

T, Tiger XRX, Tiger XC, Tiger XCA, Tiger XCX,

Tiger 800, Tiger 800XC, Tiger 800 XC

X, Tiger 800 XCA, Tiger 800 XR,

Tiger 800 XR

X, Tiger 800 XRX LRH, Tiger 800 XRT,

Tiger Explorer, Tiger Explorer XC, Explorer XR, Explorer XRx, Explorer XR

T,

Explorer XC, Explorer XCx, Explorer XC

A,

Tiger 1200 XCX, Tiger 1200 XCA, Tiger 1200 XR, Tiger 1200 XRX,
Tiger 1200 XR

X LRH, Tiger 1200 XRT

A9510086, A9510096, A9510077, A9510170

Thank you for choosing this Triumph genuine accessory kit. This accessory kit is the product of Triumph's use of proven
engineering, exhaustive testing, and continuous striving for superior reliability, safety and performance.

Completely read all of these instructions before commencing the installation of the accessory kit in order to become
thoroughly familiar with the kit’s features and the installation process.

These instructions should be considered a permanent part of your accessory kit, and should remain with it even if your
accessory-equipped motorcycle is subsequently sold.

Parts Supplied:

1. Tail pack, 10 litre
(Tiger 800 and Tiger 800XC only)

1 off 5. Mount strap short, male 1 off

6. Mount strap short, female 1 off

or 7. Protective film - left hand (if supplied) 1 off

2. Tail pack, 50 litre 1 off 8. Protective film - right hand (if supplied) 1 off

3. Mount strap long, male 1 off 9. Protective film (if supplied) 2 off

4. Mount strap long, female 1 off 10. Cleaning wipe (if supplied) 1 off

1

4

3

6

5

2

7

8

9

10

2 of 10

Warning

The accessory kits covered in this instruction are
designed for use on specific models of Triumph
motorcycle. The accessory kits and the models
applicable are listed at the start of the instruction. They
should not be fitted to any other Triumph model or to
any other manufacturer’s motorcycle. Fitting an
accessory kit to a Triumph model not listed, or to any
other manufacturer’s motorcycle will affect the
performance, stability and handling of the motorcycle.
This may affect the rider’s ability to control the
motorcycle and could cause an accident.

Warning

Always have Triumph approved parts, accessories and
conversions fitted by a trained technician of an
authorised Triumph dealer. The fitment of parts,
accessories and conversions by a technician who is not
of an authorised Triumph dealer may affect the
handling, stability or other aspects of the motorcycle’s
operation which may result in loss of motorcycle control
and an accident.

Warning

Throughout this operation, ensure that the motorcycle is
stabilised and adequately supported to prevent risk of
injury from the motorcycle falling.

Warning

If the engine has recently been running, the exhaust
system will be hot. Before working on or near the
exhaust system, allow sufficient time for the system to
cool, as touching any part of a hot exhaust could cause
burn injuries.

Warning

The tail pack must not be fitted to the sliding carriage
(if fitted). If a sliding carriage is fitted, the tail pack must
either be fitted to the pillion seat, or the sliding carriage
must be removed and the bike reverted to its standard
condition prior to fitting the tail pack to the rear rack.

Installation of the tail pack on to the sliding carriage will
affect the handling, stability or other aspects of the
motorcycle’s operation which may result in loss of
motorcycle control and an accident.

Warning

The tail pack must not be fitted in conjunction with a top
box. Installation of the tail pack together with a top box
will affect the handling, stability or other aspects of the
motorcycles’s operation which may result in loss of
motorcycle control and an accident.

Warning

Install the tail pack only in the positions described below.
Installation of the tail pack in any other position on the
motorcycle will affect the handling, stability or other
aspects of the motorcycle’s operation which may result
in loss of motorcycle control and an accident.

Warning

Remove all straps from the motorcycle when operating
the motorcycle with the tail pack removed. Operation of
the motorcycle with the straps fitted, and the tail pack
removed, may result in loss of motorcycle control and
an accident.

Warning

Remove the shoulder strap(s) from the tail pack before
mounting to the motorcycle.

Operation of the motorcycle with the shoulder strap(s)
fitted may result in loss of motorcycle control and an
accident.

Warning

50 Litre Tail Pack only: Secure the carry handles in to

the zipped compartments on either side of the tail pack
before mounting to the motorcycle.

Operation of the motorcycle with the carry handles
unsecured may result in loss of motorcycle control and
an accident.

Warning

Always ensure the tail pack straps are correctly
tensioned before riding the motorcycle. Operation of
the motorcycle with the tail pack loose may result in loss
of motorcycle control and an accident.

3 of 10

Note:

• When using the tail pack, always pack heavier
items at the bottom of the bag.

Fitment to the Rear Rack

Tiger 800, Tiger 800XC

10 Litre Tail Pack:

1. Wrap the short male mounting strap around the
left hand grab rail to the inside of the front lug, so
that the tensioning strap is uppermost.

2. Wrap the short female mounting strap around the
right hand grab rail to the inside of the front lug, so
the tensioning strap is uppermost.

1. Short female mounting strap

2. Grab handle lug (right hand shown)

Note:

• On the 10 litre tail pack, the long straps are not
used when the tail pack is fitted to the rear rack.
Retain the long straps for use when fitting the tail
pack to the rear seat.

• Ensure the underside of the tail pack is clean and
dry prior to fitting.

3. Position the tail pack to the rear rack, with the logo to
the rear.

Note:

• On the 10 litre tail pack ensure the rear mounting
straps are clipped together, as they are not used
when the tail pack is fitted to the rear rack.

Caution

Remove all straps from the motorcycle when operating
the motorcycle with the tail pack removed. Operation of
the motorcycle with the straps fitted, and the tail pack
removed, may result in damage to the straps or
motorcycle.

Warning

Always ensure any excess mounting strap is tied back
around itself to prevent the strap becoming trapped in
the motorcycle.

Operation of the motorcycle with any excess strap
hanging loose may lead to the strap becoming
entangled with the rider and/or the motorcycle and
result in loss of motorcycle control and an accident.

Caution

Always tie any excess mounting strap back around itself
to prevent the strap touching the motorcycle exhaust or
chafing against the motorcycle.

Operation of the motorcycle with any excess strap not
secured may result in damage to the straps or the
motorcycle.

Warning

Ensure the tail pack or its mounting straps do not
obscure the rear light unit or direction indicators.

Riding the motorcycle with the rear lights or direction
indicators obscured may reduce other road users’
visibility of the motorcycle leading to an accident.

1

2

T0863