Triumph Escape 500-10191, Escape 500-10211, Escape 500-10215, Escape 500-10195, Escape 500-10241 User Manual

User Manual

• Read Instructions carefully before use.

• Rollator is designed for indoor & outdoor use.

• Do NOT use as a wheelchair or as a transport chair.

• Instruction manual must be given to the user.

Charcoal Red Seat Height

500-10191 500-10195 19” (48 cm)

500-10211 500-10215 21” (54 cm)

500-10241 500-10245 24” (61 cm)

a) Do NOT use the rollator to carry heavy

objects.

b) Do NOT push the rollator when someone is

sitting on the seat.

c) If using the rollator partially folded, ensure

that all four wheels are firmly on the ground

d) Always check the brakes are working

before using.

e) Do NOT sit on rollator and push yourself

around using your feet to propel.
f) Do NOT stand on the seat.
g) Parking brake must be applied

before sitting.

h) Do NOT use on stairs or escalators.
i) Exercise caution when walking on sloped

surfaces.
j) Do NOT hang objects from the backstrap.
k) Do NOT use if the rollator is not

functioning properly.
l) The weight capacity of the rollator is

275Ib / 125kg.
m) The weight capacity of the shopping bag

is 11Ib / 5kg.
n) When storing your rollator, do not store

other items on top of your rollator.

1. For Your Safety

* Phillips screwdriver required

The Triumph Mobility Escape rollator consists
of the following parts.

(a) Rollator frame.
(b) Brake handles (pair).
(c) Shopping Bag.
(d) Backstrap & 2 screws and nuts.

Check each part carefully for shipping
damage. Do not use the rollator if there are
signs of damage and/or parts missing.

2. Assembly

Rollator should be in the unfolded position
before beginning. While holding the ‘RED’
release lever in the open position, slide the
brake handle into the frame. Rectangular slots
on the brake handle tube should be facing
inwards.

The metal rod protruding from bottom of
brake handle tube must be inserted into the
rectangular slot in the middle of the frame. Set
the desired handle height ( The line below the
number on the handle should line up with the
top edge of the frame.) , and close the ‘RED’
lever. The release lever should ‘click’ when
locked into the closed position.

Note: If brake handles are inserted with the
rectangular slots facing outwards, you will be
unable to set the handle height, as the ‘RED’
release lever will not close, and the brake will
not function.

Install the brake handles

a

b

c

d

Slide backstrap into the backrest connector. The padded side of the backstrap should face the
inside of the rollator where it will meet the user’s back while seated.

Secure the backstrap into position by inserting the screw and nut. The nut should be positioned
into the hexagon shape hole on the inside of the backrest connector.

Tighten securely using a Phillips screwdriver.

Install the backstrap

Fix the shopping bag into the brackets located under the seat at the front.

Install the Shopping Bag

Loop the strap (velcro) around the frame and
insert into wire tab.

Firmly secure the velcro strap.

Wire Tab

Strap (Velcro)